Uploaded March 2024 | Updated November 2026, 1 day ago
I fit a switchless region free 50/60Hz mod board from DA Retro to a PAL Sega Mega Drive (Genesis), with no case drilling or toggle switches. I walk through the whole install, including the different screw types inside the console, then test whether the mod is worth the effort.
The mod board came from da-retro.com - Alan is a nice helpful chap and his mods are very well priced. I don't get a commission.
This video is kindly supported by PCBWay.com - My choice for for high quality PCB manufacturing, 3D printing and more! I thank them, and Elaine Hu for their wonderful support!
3d Printed Soldering Fingers model - thingiverse.com/thing:2610383
Affiliate stuff
---------------------
15% off code is MFS15
The screwdriver set I was shamelessly plugging can be found here: kaiweets.com/en-gb/products/kaiweets-es20-screwdriver-set?sca_ref=3347529.HURuSIqCdx
The Big Screen Multimeter I was furiously shilling is here: kaiweets.com/en-gb/products/kaiweets-km601-digital-multimeter?sca_ref=3347529.HURuSIqCdx
THERE IS A RECHARGEABLE VERSION NOW: kaiweets.com/en-gb/products/kaiweets-km601s-10000-counts-rechargeable-smart-multimeter?sca_ref=3347529.HURuSIqCdx
-------------------------------------------------
🤞 💔 Can YOU help Mark Fixes Stuff to grow? 🆘 🏆
By becoming a patron, you will play a crucial role in helping me grow my channel and produce content that inspires and motivates my viewers. Your support is greatly appreciated and will make a significant difference in helping me continue to produce quality content.
⚙ Visit patreon.com/markfixesstuff for more info about Patreon Benefits such as ad free early access to my work, exclusive discord channel membership and Patron only behind the scenes videos! 🤗
THANK YOU!!
CHAPTERS
0:00 Intro: Mega Drive switchless region mod
0:34 About region free mods
1:06 Sponsor: PCBWay
1:38 PAL Mega Drive and cartridge regions
2:51 Opening the console case
5:32 Removing the shield
6:35 Removing the board from the shell
7:41 How the region is set on the board
9:24 Interrupting the signal on the board
10:31 Cleaning the pads for soldering
12:06 Wiring up the mod kit
14:20 Preparing the wire and soldering iron
15:59 Soldering the wires to the pads
18:15 Wiring the triple color LED
21:04 Installing the LED wiring
23:13 Following the mod instruction card
26:01 Enlarging the case hole for the LED
29:13 Fitting the LED bezel
31:21 Reassembling the Mega Drive
34:02 Testing the finished mod
35:39 Playing PAL vs NTSC 60Hz
38:16 Japanese cartridges on a European Mega Drive
38:55 Patron thanks and outro
SUPPORT THE CHANNEL
Website: markfixesstuff.com
LATEST VIDEOS
youtube.com/@MarkFixesStuff/videos
#Retrocomputing #Retrogaming #Nostalgia
I fit a switchless region free 50/60Hz mod board from DA Retro to a PAL Sega Mega Drive (Genesis), with no case drilling or toggle switches. I walk through the whole install, including the different screw types inside the console, then test whether the mod is worth the effort.
The mod board came from da-retro.com - Alan is a nice helpful chap and his mods are very well priced. I don't get a commission.
This video is kindly supported by PCBWay.com - My choice for for high quality PCB manufacturing, 3D printing and more! I thank them, and Elaine Hu for their wonderful support!
3d Printed Soldering Fingers model - thingiverse.com/thing:2610383
Affiliate stuff
---------------------
15% off code is MFS15
The screwdriver set I was shamelessly plugging can be found here: kaiweets.com/en-gb/products/kaiweets-es20-screwdriver-set?sca_ref=3347529.HURuSIqCdx
The Big Screen Multimeter I was furiously shilling is here: kaiweets.com/en-gb/products/kaiweets-km601-digital-multimeter?sca_ref=3347529.HURuSIqCdx
THERE IS A RECHARGEABLE VERSION NOW: kaiweets.com/en-gb/products/kaiweets-km601s-10000-counts-rechargeable-smart-multimeter?sca_ref=3347529.HURuSIqCdx
-------------------------------------------------
🤞 💔 Can YOU help Mark Fixes Stuff to grow? 🆘 🏆
By becoming a patron, you will play a crucial role in helping me grow my channel and produce content that inspires and motivates my viewers. Your support is greatly appreciated and will make a significant difference in helping me continue to produce quality content.
⚙ Visit patreon.com/markfixesstuff for more info about Patreon Benefits such as ad free early access to my work, exclusive discord channel membership and Patron only behind the scenes videos! 🤗
THANK YOU!!
CHAPTERS
0:00 Intro: Mega Drive switchless region mod
0:34 About region free mods
1:06 Sponsor: PCBWay
1:38 PAL Mega Drive and cartridge regions
2:51 Opening the console case
5:32 Removing the shield
6:35 Removing the board from the shell
7:41 How the region is set on the board
9:24 Interrupting the signal on the board
10:31 Cleaning the pads for soldering
12:06 Wiring up the mod kit
14:20 Preparing the wire and soldering iron
15:59 Soldering the wires to the pads
18:15 Wiring the triple color LED
21:04 Installing the LED wiring
23:13 Following the mod instruction card
26:01 Enlarging the case hole for the LED
29:13 Fitting the LED bezel
31:21 Reassembling the Mega Drive
34:02 Testing the finished mod
35:39 Playing PAL vs NTSC 60Hz
38:16 Japanese cartridges on a European Mega Drive
38:55 Patron thanks and outro
SUPPORT THE CHANNEL
Website: markfixesstuff.com
LATEST VIDEOS
youtube.com/@MarkFixesStuff/videos
#Retrocomputing #Retrogaming #Nostalgia










