Uploaded October 2025 | Updated November 2026, 2 hours ago
Support my channel at  awesomeforsale.com
The problem with the original bolt spool is that it used two simple aluminum plates. The upper plate would rotate freely, so it would cause the spool to unwind easily. With this updated design, I threaded the upper plate and added grip holes to the other. Now this spool winds easier and the upper plate can be tightened against the cord. If you would like one, I am including one “on the house” with every order.  you don’t have to do anything other than order before Monday. Valid OCTOBER 10,11,12- 2025. 
Support my channel at  awesomeforsale.com
The problem with the original bolt spool is that it used two simple aluminum plates. The upper plate would rotate freely, so it would cause the spool to unwind easily. With this updated design, I threaded the upper plate and added grip holes to the other. Now this spool winds easier and the upper plate can be tightened against the cord. If you would like one, I am including one “on the house” with every order.  you don’t have to do anything other than order before Monday. Valid OCTOBER 10,11,12- 2025. 



![A Professional Climber Taught Me This Trick [Rope Termination]
I learned this rope termination method from a wind turbine tech — a clean, secure way to finish a rope end without hardware.
Support my channel at https://awesomeforsale.com
I learned this method of rope termination from a wind turbine tech. Special thanks to neal at TCGM.com.
#knots #ropetricks #diy A Professional Climber Taught Me This Trick [Rope Termination]](https://i.ytimg.com/vi/cHEflhbu8Ms/mqdefault.jpg)






