Uploaded November 2026 | Updated November 2026, 2 days ago
Altium Develop puts your layout, simulation results, and fabrication notes in one shared project, so return loss and impedance tolerance calls get made with your whole team and your fabricator in the loop: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=signal-integrity&utm_content=s-parameters-where-the-10-db-return-loss-limit-comes-from
S-parameter plots in signal integrity work often carry a dashed line at -10 dB on S11, and Zach Peterson explains where that return loss limit actually comes from. Using a board-to-board connector to SFP channel in Simbeor, he shows how a -10 dB or -15 dB limit caps the data rate of a two-level link.
That number is an RF convention. It marks 10% of the power reflected, while a 10% impedance tolerance miss only reaches about -26 dB. Zach finishes by converting S11 into input impedance and explaining why an eye diagram, not one S11 plot, decides channel compliance.
π More from this Episode:
- S11 Parameter vs. Return Loss vs. Reflection Coefficient: When Are They the Same?: resources.altium.com/p/s11-vs-return-loss-vs-reflection-coefficient-when-are-they-same
- Input Impedance Deep Dive: youtu.be/SU2mfxE5DdY
- Simbeor by Simberian: simberian.com
π‘ Watch Next:
- S-Parameters Explained Part One | Signal Integrity: youtu.be/qMwcFIByL2g
- Input Impedance and Termination | Signal Integrity: youtu.be/gKI2AfatkNo
- Via Dispersion: Why Propagation Delay Changes with Frequency: youtu.be/TdiIkPV3QY8
- How to Measure Trace Impedance with a LibreVNA: youtu.be/XOpqUDyfrpM
π‘ Stay Connected:
Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!
π Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1
Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.
π Follow Altium on TikTok: tiktok.com/@altiumdesigner
π Follow Altium on Twitter: twitter.com/altium
π Follow Altium on Linkedin: linkedin.com/company/altium
π Follow Altium on Facebook: facebook.com/AltiumOfficial
The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!
About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.
#altium #signalintegrity #sparameters
β± Chapters
00:00 What is the -10dB Return Loss Limit?
00:53 Return Loss and Insertion Loss Explained
02:49 Analyzing S-Parameters in Simbeor
04:24 How Return Loss Limits Cap Data Rates
06:08 Voltage vs Power Reflection Coefficients
08:57 Calculating S11 from Power Reflection
10:29 Impedance Tolerance vs Return Loss
13:07 Why Input Impedance Matters in Real PCBs
15:45 Calculating Input Impedance from S11
17:27 Channel Compliance and Eye Diagrams
Altium Develop puts your layout, simulation results, and fabrication notes in one shared project, so return loss and impedance tolerance calls get made with your whole team and your fabricator in the loop: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=signal-integrity&utm_content=s-parameters-where-the-10-db-return-loss-limit-comes-from
S-parameter plots in signal integrity work often carry a dashed line at -10 dB on S11, and Zach Peterson explains where that return loss limit actually comes from. Using a board-to-board connector to SFP channel in Simbeor, he shows how a -10 dB or -15 dB limit caps the data rate of a two-level link.
That number is an RF convention. It marks 10% of the power reflected, while a 10% impedance tolerance miss only reaches about -26 dB. Zach finishes by converting S11 into input impedance and explaining why an eye diagram, not one S11 plot, decides channel compliance.
π More from this Episode:
- S11 Parameter vs. Return Loss vs. Reflection Coefficient: When Are They the Same?: resources.altium.com/p/s11-vs-return-loss-vs-reflection-coefficient-when-are-they-same
- Input Impedance Deep Dive: youtu.be/SU2mfxE5DdY
- Simbeor by Simberian: simberian.com
π‘ Watch Next:
- S-Parameters Explained Part One | Signal Integrity: youtu.be/qMwcFIByL2g
- Input Impedance and Termination | Signal Integrity: youtu.be/gKI2AfatkNo
- Via Dispersion: Why Propagation Delay Changes with Frequency: youtu.be/TdiIkPV3QY8
- How to Measure Trace Impedance with a LibreVNA: youtu.be/XOpqUDyfrpM
π‘ Stay Connected:
Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!
π Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1
Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.
π Follow Altium on TikTok: tiktok.com/@altiumdesigner
π Follow Altium on Twitter: twitter.com/altium
π Follow Altium on Linkedin: linkedin.com/company/altium
π Follow Altium on Facebook: facebook.com/AltiumOfficial
The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!
About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.
#altium #signalintegrity #sparameters
β± Chapters
00:00 What is the -10dB Return Loss Limit?
00:53 Return Loss and Insertion Loss Explained
02:49 Analyzing S-Parameters in Simbeor
04:24 How Return Loss Limits Cap Data Rates
06:08 Voltage vs Power Reflection Coefficients
08:57 Calculating S11 from Power Reflection
10:29 Impedance Tolerance vs Return Loss
13:07 Why Input Impedance Matters in Real PCBs
15:45 Calculating Input Impedance from S11
17:27 Channel Compliance and Eye Diagrams










