The Next Layer | Sovol SV08 Ultimate Toolchanger Build Series (Part 3: Electronics and Firmware Preparation) @thenextlayer | Uploaded September 2024 | Updated October 2024, 1 hour ago.
Join us live as we begin building the Sovol SV08 into a 7-Toolhead Toolchanger 3D Printer. Brought to you by PCBWay: jle.vi/pcbway
See Part 1 Here: youtube.com/live/2E8iKR_9BXM?feature=share
In this livestream, we'll be taking the Sovol SV08, Based on the Voron 2.4 3D Printer, and converting it into a 7 toolhead toolchanger. In the first livestream, we built the BondTech BMG version. This time, we will try to figure out the wiring, electronics, and firmware part of things.
Tune in Live! See you there!
🤫 Get my custom filament and printer profiles, buyers guides, and much, much more on Patreon: patreon.com/thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
Mainline Klipper SV08 GUIDE! github.com/Rappetor/Sovol-SV08-Mainline
🔗 THANKS TO THE PRODUCT SPONSORS OF THIS PROJECT: 🔗
👉 Sovol: jle.vi/sovol
👉 LDO Motors: ldomotion.com | ldomotors.com
👉 Polymaker: jle.vi/polymaker
👉 BondTech: https://bondtech.se
👉 Phaetus: phaetus.com
👉 E3D: jle.vi/e3d
👉 Slice Engineering: jle.vi/slice
🗳 STL FILES OF FEATURED 3D PRINTING MODELS: 🗳
🗿 Spartacus Toolhead: printables.com/model/745412-spartacus-the-toolhead
🗿
🗿
🗿
🗿
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
Join us live as we begin building the Sovol SV08 into a 7-Toolhead Toolchanger 3D Printer. Brought to you by PCBWay: jle.vi/pcbway
See Part 1 Here: youtube.com/live/2E8iKR_9BXM?feature=share
In this livestream, we'll be taking the Sovol SV08, Based on the Voron 2.4 3D Printer, and converting it into a 7 toolhead toolchanger. In the first livestream, we built the BondTech BMG version. This time, we will try to figure out the wiring, electronics, and firmware part of things.
Tune in Live! See you there!
🤫 Get my custom filament and printer profiles, buyers guides, and much, much more on Patreon: patreon.com/thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
Mainline Klipper SV08 GUIDE! github.com/Rappetor/Sovol-SV08-Mainline
🔗 THANKS TO THE PRODUCT SPONSORS OF THIS PROJECT: 🔗
👉 Sovol: jle.vi/sovol
👉 LDO Motors: ldomotion.com | ldomotors.com
👉 Polymaker: jle.vi/polymaker
👉 BondTech: https://bondtech.se
👉 Phaetus: phaetus.com
👉 E3D: jle.vi/e3d
👉 Slice Engineering: jle.vi/slice
🗳 STL FILES OF FEATURED 3D PRINTING MODELS: 🗳
🗿 Spartacus Toolhead: printables.com/model/745412-spartacus-the-toolhead
🗿
🗿
🗿
🗿
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
