Uploaded January 2026 | Updated September 2026, 1 week ago

---

I’m getting more and more into home automation.

In this video, I take a closer look at the Sonoff NSPanel Pro and show how I use it as a smart home hub that combines Sonoff devices with my own ESP32 projects.

Sonoff offers a wide range of smart switches, plugs, sensors, and Zigbee devices that are easy to set up using the eWeLink app. At the same time, the NSPanel Pro allows access to web pages and APIs, which makes it possible to integrate custom hardware, self-hosted services, and older DIY projects.

I’ll show how I control GPIO pins on an ESP32 via a simple web interface, display sensor data like outdoor temperature, and combine everything into one central control panel mounted on the wall.

This video is sponsored by Sonoff, but all opinions are my own. Sonoff supports my maker approach, including firmware modification and experimentation.

LINKS:
NSPanel PRO
https://sonoff.tech/en-eu/products/sonoff-nspanel-pro-smart-home-control-panel-86-type?ref=355&utm_source=affiliate

SONOFF BASICR4 Wi-Fi Smart Switch
https://sonoff.tech/en-eu/products/sonoff-basicr4-wi-fi-smart-switch?ref=355&utm_source=affiliate

SONOFF AirGuard CO2 Matter Over Wi-Fi Air Quality Monitor | SAWF-08P
https://sonoff.tech/en-eu/products/sonoff-airguard-co2-matter-over-wi-fi-air-quality-monitor-sawf-08p?ref=355&utm_source=affiliate

Wifi Camera:
https://sonoff.tech/products/sonoff-cam-slim-gen2-smart-home-security-camera?ref=355&utm_source=affiliate

#SmartHome
#ESP32
#Sonoff
#HomeAutomation
#DIY