Uploaded January 2026 | Updated November 2026, 1 day ago
In this video, I’ll show you how I used SolidWorks, a 3D printer, and some basic DIY skills to clean up my home-network setup in my garage.
The goal was simple: make the area neater, reduce cable clutter, and retain access to power points and equipment when needed.
🏫 What you’ll see through the video
🔹 assessing the existing mess of components
🔹 setting up a rough SolidWorks layout using a sketch and reference images
🔹 using decals to quickly approximate port/LED positions
🔹 printing prototypes to check fit before committing to a bigger print
🔹 iterating the mounting approach
🔹 final prints, cleanup, install, and the end result
This is practical, “get it done” modelling — not a perfection exercise.
🔩 Designed in SolidWorks 2023
🖨️ Printed on a BambuLab P1S
🔔 Subscribe for more real-world design projects.
#SolidWorks #3DPrinting #DesignToPrint
🚨 LEARN FROM ME 🚨
SolidWorks for Designers: Foundations → CSWA
7-hour guided course on Udemy
udemy.com/course/solidworks-for-designers-foundations-to-cswa/?referralCode=72203B375E1FB455DFBA
🕰️ Timestamps
00:00 What we’re building
00:30 The mess (before) + constraints
03:45 Sketch + reference setup
06:38 Simplifying the design direction
09:02 Prototype 1 (fit check)
09:56 Design improvements
11:19 Power pack + mounting approach
13:45 Print cleanup + wall test-fit
15:18 Install Timelapse
20:15 Proto 2 assessment
20:57 Final redesign in SolidWorks
25:10 3D Print cleanup tips
26:15 Install Timelapse 2
33:40 Final result + what I’d improve
In this video, I’ll show you how I used SolidWorks, a 3D printer, and some basic DIY skills to clean up my home-network setup in my garage.
The goal was simple: make the area neater, reduce cable clutter, and retain access to power points and equipment when needed.
🏫 What you’ll see through the video
🔹 assessing the existing mess of components
🔹 setting up a rough SolidWorks layout using a sketch and reference images
🔹 using decals to quickly approximate port/LED positions
🔹 printing prototypes to check fit before committing to a bigger print
🔹 iterating the mounting approach
🔹 final prints, cleanup, install, and the end result
This is practical, “get it done” modelling — not a perfection exercise.
🔩 Designed in SolidWorks 2023
🖨️ Printed on a BambuLab P1S
🔔 Subscribe for more real-world design projects.
#SolidWorks #3DPrinting #DesignToPrint
🚨 LEARN FROM ME 🚨
SolidWorks for Designers: Foundations → CSWA
7-hour guided course on Udemy
udemy.com/course/solidworks-for-designers-foundations-to-cswa/?referralCode=72203B375E1FB455DFBA
🕰️ Timestamps
00:00 What we’re building
00:30 The mess (before) + constraints
03:45 Sketch + reference setup
06:38 Simplifying the design direction
09:02 Prototype 1 (fit check)
09:56 Design improvements
11:19 Power pack + mounting approach
13:45 Print cleanup + wall test-fit
15:18 Install Timelapse
20:15 Proto 2 assessment
20:57 Final redesign in SolidWorks
25:10 3D Print cleanup tips
26:15 Install Timelapse 2
33:40 Final result + what I’d improve










