![[SOLVED] MKX Lag Mortal Kombat X frame rate issues (New larger sized SSD fixed this and other issues @FusionDeveloper](https://i.ytimg.com/vi/ba6cXCqUBu0/hqdefault.jpg)
Uploaded August 2018 | Updated September 2026, 5 hours ago
[SOLVED] I replaced my SSD with a larger size one, and it solved all the bugs in games. Very strange.
[PROBLEM] MKX Lag Mortal Kombat X frame rate issues
[PROBLEM] Most of the game runs fine, but this stage on the left where the WATER FOUNTAIN is, and Quan Chi has a victory animation sequence, which both put the frame rate between 1 and 10 FPS.
It is not a driver issue and not a corrupt file issue and not a video card setting issue within the game. Min or Max settings and the issue is identical. If it was a settings issue, then changing the settings would have at least a minor impact on frame rate, instead of absolutely no change in frame rate. For the purpose of making the video short, I did a few edits and I ran and recorded at 1080p and didn't bother recording at lowest resolution and minimum settings.
Reinstalling video card drivers and reinstalling game also had no change.
I can't solve this issue, if anyone has had this issue and solved it, please let me know how. Also, please do not say to change the settings within the game, because I explained this above.
Sorry for bad wording and repeating, I'm busy and tired, maybe i will edit this later.
[SOLVED] I replaced my SSD with a larger size one, and it solved all the bugs in games. Very strange.
[PROBLEM] MKX Lag Mortal Kombat X frame rate issues
[PROBLEM] Most of the game runs fine, but this stage on the left where the WATER FOUNTAIN is, and Quan Chi has a victory animation sequence, which both put the frame rate between 1 and 10 FPS.
It is not a driver issue and not a corrupt file issue and not a video card setting issue within the game. Min or Max settings and the issue is identical. If it was a settings issue, then changing the settings would have at least a minor impact on frame rate, instead of absolutely no change in frame rate. For the purpose of making the video short, I did a few edits and I ran and recorded at 1080p and didn't bother recording at lowest resolution and minimum settings.
Reinstalling video card drivers and reinstalling game also had no change.
I can't solve this issue, if anyone has had this issue and solved it, please let me know how. Also, please do not say to change the settings within the game, because I explained this above.
Sorry for bad wording and repeating, I'm busy and tired, maybe i will edit this later.
![[SOLVED] MKX Lag Mortal Kombat X frame rate issues (New larger sized SSD fixed this and other issues](https://i.ytimg.com/vi/ba6cXCqUBu0/mqdefault.jpg "[SOLVED] MKX Lag Mortal Kombat X frame rate issues (New larger sized SSD fixed this and other issues
[SOLVED] I replaced my SSD with a larger size one, and it solved all the bugs in games. Very strange.
[PROBLEM] MKX Lag Mortal Kombat X frame rate issues
[PROBLEM] Most of the game runs fine, but this stage on the left where the WATER FOUNTAIN is, and Quan Chi has a victory animation sequence, which both put the frame rate between 1 and 10 FPS.
It is not a driver issue and not a corrupt file issue and not a video card setting issue within the game. Min or Max settings and the issue is identical. If it was a settings issue, then changing the settings would have at least a minor impact on frame rate, instead of absolutely no change in frame rate. For the purpose of making the video short, I did a few edits and I ran and recorded at 1080p and didnt bother recording at lowest resolution and minimum settings.
Reinstalling video card drivers and reinstalling game also had no change.
I cant solve this issue, if anyone has had this issue and solved it, please let me know how. Also, please do not say to change the settings within the game, because I explained this above.
Sorry for bad wording and repeating, Im busy and tired, maybe i will edit this later.")
![Aquaponic BSF symbiotic setup Temporary Setup (07-18-2024) [July]](https://i.ytimg.com/vi/fS4fB4iGRs0/mqdefault.jpg "Aquaponic BSF symbiotic setup Temporary Setup (07-18-2024) [July]
Aquaponic BSF symbiotic setup Temporary Setup (07-18-2024) [July]
Lots of info in this video description:
This uses bins for the larvae and an aquarium with floating plants for raising the flies which they go to on their own.
I see I have Booklice in my BSFL bin (which look sort of like tiny ants or more like springtails if you know what those are), but I read that it is okay and they will only compete for food and eat mold and dead larvae and dead flies and clean out the pupae casings, sort of like having springtails.
Special thanks to: https://www.youtube.com/@RGSurigao who is a BSF Farmer also and brought to my attention that I hadnt uploaded any update videos in 3 years!
Thanks to https://symtonbsf.com for the larvae (this is several generations after I received them)
I gave my larvae water after I finished recording this video, before I uploaded it.
I need to add more water to my aquarium, this is as low as I let it get.
Ill add about 3-5 gallons of water.
I could eliminate the duckweed and do away with the problem of duckweed sticking to the sides of the aquarium and drying up and dying, but it is a good soft food source, so I dont plan to do away with it.
The water Spangles and Water Lettuce also have a benefit of being a sturdy surface for the flies to land on to drink water from.
The aquarium has near 100% humidity, unlimited water without the risk of drowning and bright lights, so the flies are happy enough.
The #1 difficulty with BSF indoors, is making sure the flies have enough light to mate.
Without enough light, they will REFUSE to mate, no matter even if you have 1 million flies under a light, you will get zero mating.
So if they arent mating indoors, they demand more light!
I currently use 3 lights (ill check and update this later).
1 is sort of a daylight LED, maybe 15 watts?
1 is sort of a soft/warm white LED, maybe 15 watts?
1 is blacklight LED, maybe 5 watts?
So maybe 35 actual watts in LED total.
Maybe 1500 lumens + 1500 lumens + ?? lumens = 3,000+ lumens")
![ETQW bot funny reaction (Also, how to play online in 2020 in video description) [240p video]](https://i.ytimg.com/vi/fyp2Ii3YawU/mqdefault.jpg "ETQW bot funny reaction (Also, how to play online in 2020 in video description) [240p video]
Turn sound down!
I caught a bot driving like a maniac after I planted an explosive on the front of the truck! Unfortunately, I had to edit 3 clips together because I was testing the newest version of FRAPS :( This was totally unexpected, and I couldnt get a bot to do it again.
Enemy Territory: Quake Wars (demo 2, single player bot match)
Sorry for the ultra loud volume. I recorded it with everything at 50% but for some reason, that is STILL too loud.
(License Keys are now useless since the server no longer exists.)
However, you can still play ONLINE when you Create an Offline Account.
Choose LAN.
Manually put in a server to connect to such as:
.
EU : etqw.taw.net:27735
EU CUSTOM: etqw.taw.net:27734
NA: etqw2.taw.net
NA CUSTOM: etqw2.taw.net:27734
.
Other servers available here:
https://www.gametracker.com/search/etqw/?sort=0&order=ASC
.
If you are frustrated and dont have the time to find where to put the server in, you can just make a shortcut to the ETQW.EXE and add a space, followed by: +connect etqw2.taw.net to the end of the shortcut
such as:
.:.......................etqw.exe +connect etqw2.taw.net
(notice the space between and + and between Connect and Etqw)
.
If you still need help, you can ask me.")
