Uploaded May 2013 | Updated September 2026, 2 hours ago
Welcome to the instructional video for the Burley Solo.
The Solo will arrive in its folded position.
Start by removing the contents, and attaching the tow-bar clamps.
Match the wheel guard hole to the hole in the tow bar receiver, and insert the bolt from the top. Be sure to tighten the nut securely using the provided hex key and a 10mm wrench.
Next attach the wheels. They will lock in and out of place using the push button in the middle.
To lock the frame into its upright position, reach in through the back, grab the aluminum frame, and pull it towards you.
Snap the frame into place as shown.
To install the tow-bar, first unlock the clamp, and then slide the tow-bar in from the front.
Make sure to align the holes in the back, so the bar can be locked into place with the safety pins.
Strolling and jogging kits are attached the same method.
You can adjust your suspension, by twisting the black knob on the side.
To adjust the handlebar, unlock it by pulling the lever, adjust the bar to the desired position, and lock it back in place.
To fold the trailer, reverse this process.
The frame can be unlocked by pressing upwards on both red latches simultaneously.
If you have any additional questions about your Solo, please visit our website at Burley.com.
INSTRUCTIONAL VIDEOS
Solo Instructions: youtu.be/nHk4vBwL-20
Attaching Trailer to Bike: youtu.be/0Jo4b9eMlpw
Attaching Trailer to Bike: youtu.be/AdvmvR3D4tw
Hitch Instructions: youtu.be/UgIGpSU6MLk
Welcome to the instructional video for the Burley Solo.
The Solo will arrive in its folded position.
Start by removing the contents, and attaching the tow-bar clamps.
Match the wheel guard hole to the hole in the tow bar receiver, and insert the bolt from the top. Be sure to tighten the nut securely using the provided hex key and a 10mm wrench.
Next attach the wheels. They will lock in and out of place using the push button in the middle.
To lock the frame into its upright position, reach in through the back, grab the aluminum frame, and pull it towards you.
Snap the frame into place as shown.
To install the tow-bar, first unlock the clamp, and then slide the tow-bar in from the front.
Make sure to align the holes in the back, so the bar can be locked into place with the safety pins.
Strolling and jogging kits are attached the same method.
You can adjust your suspension, by twisting the black knob on the side.
To adjust the handlebar, unlock it by pulling the lever, adjust the bar to the desired position, and lock it back in place.
To fold the trailer, reverse this process.
The frame can be unlocked by pressing upwards on both red latches simultaneously.
If you have any additional questions about your Solo, please visit our website at Burley.com.
INSTRUCTIONAL VIDEOS
Solo Instructions: youtu.be/nHk4vBwL-20
Attaching Trailer to Bike: youtu.be/0Jo4b9eMlpw
Attaching Trailer to Bike: youtu.be/AdvmvR3D4tw
Hitch Instructions: youtu.be/UgIGpSU6MLk
