My Tech Fun | Snapmaker 2.0 A350T - Part 2: 3D printing inside Snapmaker Enclosure @MyTechFun | Uploaded January 2023 | Updated October 2024, 11 hours ago.
In this part 2, I am assembling the Snapmaker Enclosure and I will test it with 3D printing on A350T. According to specifications, the enclosure will reduce the noise, give warmer environment and capture toxic fumes (advantages if we want to 3D print ABS parts).
Snapmaker Official Store: bit.ly/3hBZD0t
Part 1 (A350T assembling, 3D printing): youtu.be/cadSShSGYhQ
In part 3 I will test it with laser- and CNC tool heads.
Contents:
0:00 Introduction
2:00 Assembling
5:26 Cura settings
5:45 Preparing for 3D printing
6:03 Calibration cube
6:25 About spool holder
7:27 3D printing, bed heating
8:12 Noise measuring
9:41 Spiral (vase) mode printing
11:32 ABS 3D printing
14:33 Conclusions
#snapmaker
In this part 2, I am assembling the Snapmaker Enclosure and I will test it with 3D printing on A350T. According to specifications, the enclosure will reduce the noise, give warmer environment and capture toxic fumes (advantages if we want to 3D print ABS parts).
Snapmaker Official Store: bit.ly/3hBZD0t
Part 1 (A350T assembling, 3D printing): youtu.be/cadSShSGYhQ
In part 3 I will test it with laser- and CNC tool heads.
Contents:
0:00 Introduction
2:00 Assembling
5:26 Cura settings
5:45 Preparing for 3D printing
6:03 Calibration cube
6:25 About spool holder
7:27 3D printing, bed heating
8:12 Noise measuring
9:41 Spiral (vase) mode printing
11:32 ABS 3D printing
14:33 Conclusions
#snapmaker