Uploaded June 2014 | Updated November 2026, 2 hours ago
Links and Material List Below:
Write-up that helped me, use for instructions keep in mind the changes I have made discussed in this video.
foamhaven.com/forums/index.php?showtopic=20296
List of Parts:
1 1/4" PVC
1/2" PVC
1/2" CPVC
Wood for handle
surgical tubing
nail
plastic clothespin
small "L" bracket
Expoy Putty
Glue/Goop for front bushing
1/2" self taping screws
1 1/2" Rubber washer
1 1/4" rubber washer
machine screw and nut of your choice
1/2" CPVC endcap
1/2" CPVC T
1" to 1/2" PVC Bushing
1 1/4" PVC t
2x 1 1/4" to 1/2" PVC Bushing
2x 1/2" PVC endcap
Ruber Safe Lubricant
Electrical Tape
Screws to hold handle in
------------------------------------------------------------------------------------------------
How to contact me:
Fognerf@gmail.com
Or:
Feel free to YouTube PM
------------------------------------------------------------------------------------------------
Contracts are CLOSED at the moment.
Please check a more recent video if this one is old
for more current information, or contact me in a
method stated above with question.
------------------------------------------------------------------------------------------------
Please feel free to leave any responses in the comments section below.
Thank you for watching!
Links and Material List Below:
Write-up that helped me, use for instructions keep in mind the changes I have made discussed in this video.
foamhaven.com/forums/index.php?showtopic=20296
List of Parts:
1 1/4" PVC
1/2" PVC
1/2" CPVC
Wood for handle
surgical tubing
nail
plastic clothespin
small "L" bracket
Expoy Putty
Glue/Goop for front bushing
1/2" self taping screws
1 1/2" Rubber washer
1 1/4" rubber washer
machine screw and nut of your choice
1/2" CPVC endcap
1/2" CPVC T
1" to 1/2" PVC Bushing
1 1/4" PVC t
2x 1 1/4" to 1/2" PVC Bushing
2x 1/2" PVC endcap
Ruber Safe Lubricant
Electrical Tape
Screws to hold handle in
------------------------------------------------------------------------------------------------
How to contact me:
Fognerf@gmail.com
Or:
Feel free to YouTube PM
------------------------------------------------------------------------------------------------
Contracts are CLOSED at the moment.
Please check a more recent video if this one is old
for more current information, or contact me in a
method stated above with question.
------------------------------------------------------------------------------------------------
Please feel free to leave any responses in the comments section below.
Thank you for watching!










![DIY Self Standing Workbench With Shelving Tutorial
In this video Ill show you how to make a solid self supporting workbench that has an upper shelf above, lower shelf, and some pegboard!
This sturdy bench should be able to accommodate a large variety of tools to fit your shop. This might be overkill for your needs so feel free to modify the design to suit your work area.
Supplies Used:
- [Qty 2] 1 lb box of 2-1/2 Screws
- [Qty 1] 1 lb box of 1-1/2 Screws
- [Qty 2] 4x4x8 wood for legs
- [Qty 1] 4x8x3/4 plywood
- [Qty 20] 2x4x104 or 96
- [Qty 2] 2x4 pegboard
Links
-Instagram: https://www.instagram.com/rmods74/
- Facebook: https://www.facebook.com/Rmods74
How to contact me:
-Rmods(dot)Nerf@gmail(dot)com
Please feel free to leave any responses in the comments section below.
#Workbench #DIY #Maker DIY Self Standing Workbench With Shelving Tutorial](https://i.ytimg.com/vi/X2-HgycEsec/mqdefault.jpg)