🌱 Smart Motor Control with ESP32-S3 & Environmental Sensors! @Makerfabs
🌱 Smart Motor Control with ESP32-S3 & Environmental Sensors!  @Makerfabs
Uploaded November 2026 | Updated November 2026, 3 hours ago
In this demo, the Mabee SGP30 sensor monitors eCO₂ levels and displays readings on MaTouch AI ESP32-S3.

When eCO₂ exceeds 600 ppm, the relay turns the motor on. When it drops below 500 ppm, the motor switches off.

A practical example of sensor-based automation with ESP32-S3!

🛠️ Hardware:

MaTouch AI ESP32-S3 2.8" TFT
Mabee TVOC & eCO₂ Sensor
Mabee 10A Relay

🔗
makerfabs.com/matouch-ai-esp32s3-2-8-tft-st7789v.html
makerfabs.com/mabee-relay-10a.html
makerfabs.com/mabee-tvoc-and-eco2-sgp30-sht31.html

#Makerfabs #ESP32S3 #eCO2 #EnvironmentalMonitoring #MotorControl #IoT
🌱 Smart Motor Control with ESP32-S3 & Environmental Sensors!MaUWB Direct: Ready-to-Install UWB Tag & Anchor System for Real-Time Positioning📵 No Cell Signal? Stay Connected. 🛰️Can AI Count to 10,000 in Seconds?  | Challenge Accepted!📡 UWB Indoor Positioning Demo | nRF52840 + DW30004 Channel LoRa Relay Kit with Controller 868M  Long Distance Remote Control SolutionNew Launched MaUWB for Home Assistant Usage DemoMade a Christmas Countdown Calendar On MatouchUsing AgroSense Barometric Pressure Sensor LoRaWAN® with Datacake | Smart Agriculture MonitoringIs PCBA soldering better done by manual soldering or reflow solderingMaTouch 7 ESP32-S3 vs ESP32-P4: The Ultimate Showdown!MaTouch 1.28” Toolset_ LED Matrix & Clockwise
Makerfabs |

🌱 Smart Motor Control with ESP32-S3 & Environmental Sensors!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER