VogMan | Siraya Tech Cast castable resin HONEST review + How to use - by VOGMAN @vogman | Uploaded May 2021 | Updated October 2024, 5 hours ago.
Siraya Tech Cast castable resin - my HONEST review and instructions HOW TO USE. I was lucky enough to be the first person outside of Siraya Tech to test this resin, so here I share my thoughts and findings, plus a few useful tips on how to get the most when printing and metal casting with this wonderful, bargain priced resin.
🔹 _*SIRAYA TECH 'CAST' RESIN*_ 🔹
Amazon UK ▶ amzn.to/3GKRVaW
Amazon US ▶ amzn.to/33O7622
Amazon CA ▶ amzn.to/3PqIjqc
Amazon DE ▶ amzn.to/40W7pEr
I also _STRONGLY RECOMMEND_ you buy this glycerine
Amazon UK ▶ amzn.to/3gBvZ7w
Amazon US ▶ amzn.to/3QuZE2i
Amazon CA ▶ amzn.to/3Ca3Twb
Amazon DE ▶ amzn.to/3DXU843
or similar. It's a one-off purchase, but trust me, you'll need it for this resin.
*And remember, DON'T buy this resin if you're not into metal casting! It's a speciality resin!*
🔹 _*PRINTER SETTINGS*_ 🔹
Siraya Techs recommended printer settings - bit.ly/3QmaEPD
🔹 _*EQUIPMENT & PRODUCTS USED*_ 🔹
I often get asked where I buy my investment powder, what type of oven do I use, etc, so to make life easy I’ve made a list with links on my website here vegoilguy.co.uk/equipment.php
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 vegoilguy.co.uk/donations 😁
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ etsy.com/uk/shop/VegOilGuy 🛒
🔹 _*MY LINKS*_ 🔹
▶ vegoilguy.co.uk
▶ vogsmerch.myspreadshop.co.uk
▶ instagram.com/vegoilguy
▶ facebook.com/groups/vegoilguy
▶ etsy.com/uk/shop/VegOilGuy
▶ patreon.com/vegoilguy
🔹 _*DISCLAIMER*_ 🔹
This video is for and educational and entertainment purposes. Do not try and replicate what you see here without proper equipment, safety gear and a thorough understanding of the processes involved. It is a VERY dangerous.
Siraya Tech Cast castable resin - my HONEST review and instructions HOW TO USE. I was lucky enough to be the first person outside of Siraya Tech to test this resin, so here I share my thoughts and findings, plus a few useful tips on how to get the most when printing and metal casting with this wonderful, bargain priced resin.
🔹 _*SIRAYA TECH 'CAST' RESIN*_ 🔹
Amazon UK ▶ amzn.to/3GKRVaW
Amazon US ▶ amzn.to/33O7622
Amazon CA ▶ amzn.to/3PqIjqc
Amazon DE ▶ amzn.to/40W7pEr
I also _STRONGLY RECOMMEND_ you buy this glycerine
Amazon UK ▶ amzn.to/3gBvZ7w
Amazon US ▶ amzn.to/3QuZE2i
Amazon CA ▶ amzn.to/3Ca3Twb
Amazon DE ▶ amzn.to/3DXU843
or similar. It's a one-off purchase, but trust me, you'll need it for this resin.
*And remember, DON'T buy this resin if you're not into metal casting! It's a speciality resin!*
🔹 _*PRINTER SETTINGS*_ 🔹
Siraya Techs recommended printer settings - bit.ly/3QmaEPD
🔹 _*EQUIPMENT & PRODUCTS USED*_ 🔹
I often get asked where I buy my investment powder, what type of oven do I use, etc, so to make life easy I’ve made a list with links on my website here vegoilguy.co.uk/equipment.php
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 vegoilguy.co.uk/donations 😁
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ etsy.com/uk/shop/VegOilGuy 🛒
🔹 _*MY LINKS*_ 🔹
▶ vegoilguy.co.uk
▶ vogsmerch.myspreadshop.co.uk
▶ instagram.com/vegoilguy
▶ facebook.com/groups/vegoilguy
▶ etsy.com/uk/shop/VegOilGuy
▶ patreon.com/vegoilguy
🔹 _*DISCLAIMER*_ 🔹
This video is for and educational and entertainment purposes. Do not try and replicate what you see here without proper equipment, safety gear and a thorough understanding of the processes involved. It is a VERY dangerous.
![Bluecast X One Castable 3d printer resin [HONEST REVIEW]](https://i.ytimg.com/vi/nrnNH1Ji2DE/hqdefault.jpg "Bluecast X One Castable 3d printer resin [HONEST REVIEW]
Bluecast X One is the latest metal castable resin from the Bluecast powerhouse and I was delighted to be able to put it through its paces here. Having heard stories about how its the best 3D printing resin yet from Bluecast, I was excited to give it a go, printing, cleaning, curing and eventually casting some bronze pieces.
VIDEO UPDATE : Folks tell me that here in the UK (and other parts of the world) Ethanol is more usually called Methylated Spirits. Now that is good news for us UK dwellers as Meths IS cheaper than IPA, giving Bluecast X One another advantage over other resins 😁
0:00 - Introduction
1:11 - Printer Settings
1:26 - Instructions
1:43 - First prints
1:55 - Support sizing
3:33 - Cleaning & Curing
5:25 - Print quality
6:14 - Metal casting
8:40 - My thoughts
*** MINI AIRBRUSH ***
Amazon UK - https://amzn.to/3kNUUq7
Amazon US - US https://amzn.to/3yBHDpw
*** OTHER EQUIPMENT & PRODUCTS USED ***
Theres a lot of equipment mentioned in this video, so to make life easier I’ve made a list with links on my website here https://vegoilguy.co.uk/equipment.php
*** DISCLAIMER ***
This product was given to me, free of charge and without obligation. No money has changed hands and the only agreement made was that I video an INDEPENDENT review, expressing my own personal and above all honest thoughts on the product.
*** PLEASE SUPPORT THIS CHANNEL ***
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here: https://www.patreon.com/vegoilguy - Or if you prefer to make a PayPal donation, you can do that here - www.vegoilguy.co.uk/donations
*** LINKS ***
https://vegoilguy.co.uk
https://instagram.com/vegoilguy
https://facebook.com/groups/vegoilguy
https://etsy.com/uk/shop/VegOilGuy
https://patreon.com/vegoilguy
#metalcasting
#castableresin
#lostresincasting
#3dprinting
#vegoilguy
#vog")
![Anycubic Photon M3 Max auto resin filling 3D printer [HONEST REVIEW]](https://i.ytimg.com/vi/pmJV8ho5gZU/hqdefault.jpg "Anycubic Photon M3 Max auto resin filling 3D printer [HONEST REVIEW]
Big resin printers are becoming big business, and Anycubic has launched its Photon M3 Max, a printer capable of printing 300mm tall objects. But theres something apparently wrong with the Max - its much cheaper than the competition. Why is that? Wed better have a look 😁
🔹 _*ANYCUBIC PHOTON M3 MAX*_ 🔹
Official Store ▶ https://bit.ly/3Rg4Ibp
Amazon UK ▶ https://amzn.to/3dwQGD3
Amazon US ▶ https://amzn.to/3dyZwk1
Amazon CA ▶ https://amzn.to/3xJyFIH
Amazon DE ▶ https://amzn.to/3XVrhom
Amazon IT ▶ https://amzn.to/3xLt5FD
Amazon ES ▶ https://amzn.to/3IOzVkk
══════════════════════════════════════════
💚 *V O G M A N S P I C K S* 💚
_*Best Budget printer*_ ▶ https://tinyurl.com/52ku5vdb
_*Best DLP printer*_ ▶ https://tinyurl.com/43zp5648
_*Best Standard printers*_ ▶ https://tinyurl.com/mr37js37
_*Best Midrange printers*_ ▶ https://tinyurl.com/3wwkemnk
_*Best Large printers*_ ▶ https://tinyurl.com/2p8epxc8
_*Best Resins*_ ▶ https://tinyurl.com/2vp5kcvz
══════════════════════════════════════════
0:00 - Introduction
1:02 - Weight
1:14 - Print Volume
1:32 - Split Lid
2:59 - Autofeed System
4:18 - Build Plate
5:09 - 7K Screen
6:47 - Slicer
7:01 - Prints
7:51 - My thoughts
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 https://www.patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁
🔹 _*ARCHVILLAIN GAMES*_ 🔹
Fantastic miniatures, great giveaways and competitions...
▶ http://bit.ly/AVGVOG
🔹 _*PRINTED OBSESSION ***
Excellent miniatures. Find them here:
https://www.instagram.com/printedobsession
https://printedobsession.co.uk
www.myminifactory.com/users/printedobsession
🔹 _*MY LINKS*_ 🔹
▶ https://vegoilguy.co.uk
▶ https://vogsmerch.myspreadshop.co.uk
▶ https://instagram.com/vegoilguy
▶ https://facebook.com/groups/vegoilguy
▶ https://etsy.com/uk/shop/VegOilGuy
▶ https://patreon.com/vegoilguy
🔹 _*DISCLAIMER*_ 🔹
This video is for and educational and entertainment purposes. Do not try and replicate what you see here without proper equipment, safety gear and a thorough understanding of the processes involved. It is a VERY dangerous.
🔹 _*EQUIPMENT & PRODUCTS USED*_ 🔹
I often get asked where I buy my investment powder, what type of oven do I use, etc, so to make life easy I’ve made a list with links on my website here http://vegoilguy.co.uk/equipment.php
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ https://www.etsy.com/uk/shop/VegOilGuy 🛒
#3dprinting #3dprinter #resinprinting #vegoilguy #vog")
