Uploaded June 2020 | Updated September 2026, 2 weeks ago

---

Carving of a double sided hanging address plaque for a friend out of poplar on the @Ooznest Workbee CNC using @Vectric Ltd Aspire for toolpathing!

You can check out this budget CNC from ooznest here: ooznest.co.uk/product/workbee-cnc-full-kit

You can follow me on Instagram here: instagram.com/wildrosebuilds

Here are a few things i'd do differently next time around:

- Use a proper fixture for aligning the two sides, i used registration holes in the stock to align the piece once flipped but that was ineffective.
-Paint the letters after the Vbit carving before running the final smoothing pass to get a cleaner look for the face edge of the letters and avoid the finacky hand painting.
-Swap my dust shoe and hose for a larger diameter one as this one got clogged during my roughing pass.

Music:
Track: Vision — KV [Audio Library Release]
Music provided by Audio Library Plus
Watch: youtu.be/6oaNza9XWF8
Free Download / Stream: alplus.io/vision

#SignMaking #CNC #WoodWorking