Shielding CNC Electronic Wires - How to Eliminate EMI (Interference)! @PatrickHoodDaniel
Shielding CNC Electronic Wires - How to Eliminate EMI (Interference)!  @PatrickHoodDaniel
Uploaded August 2024 | Updated November 2026, 2 days ago
BuildyCNC.com - For CNC, laser machines, and 3D printing resources: buildyourcnc.com

If you need personal assistance and would like to purchase tech support tokens: buildyourcnc.com/item/sub-assemblies-Technical-support-token

Support my content and join the channel:
youtube.com/channel/UCC7ifdmN7ebFo-eXBUZkeiw/join

Members-Only videos:
youtube.com/playlist?list=UUMOC7ifdmN7ebFo-eXBUZkeiw

In this comprehensive guide, we explore the importance of shielding in CNC electronics and demonstrate various scenarios to show its effects. Here are the topics I cover:

- Components of a CNC machine: controller, stepper motor driver, stepper motor, and power supplies
- Testing with bare wires vs. shielded cables
- Effects of parallel vs. intersecting wire placement
- Interference patterns on signal wires and limit switch inputs
- Oscilloscope readings and their interpretations
- Best practices for cable management in CNC setups

Equipment used:

Oscilloscopes (Personally Recommend):
Budget (Handheld 50Mhz): amzn.to/46Pi6f0

Medium Budget but top-rated
Siglent Technologies Oscilloscope: amzn.to/4dqQxeJ

The next oscilloscope I would purchase: amzn.to/3AwHBG3

Wire Ferrule Kit with Tool: amzn.to/4dshNJR

My favorite Multimeter: amzn.to/4dOmqNW
You will have this multimeter for the rest of your life, and you can pass it down to your kids!!

All of the CNC electronics in this video can be found at BuildYourCNC

Timestamps:
0:00 Intro
0:30 Components and Tools
3:47 1st Test - No Shielding with Short Wires Just Laying About
7:07 2nd Test - Short Signal Wires and Motor Wires
11:36 3rd Test - No Shielding Long Signal and Motor Wires
16:08 4th Test - No Shielding Long Signal and Motor Wires Intersecting
17:59 5th Test - No Shielding Long Limit Switch Signal Wire and Motor Wires
19:09 Self Sponsorship - My Resource Offering to You
21:08 5th Test Continued
25:22 6th Test - Limit Switch Signal Shielded and Motor Wires Not Shielded
26:44 7th Test - Limit Switch Signal Not Shielded and Motor Wires Shielded
28:07 8th and Final Test - Both Limit Switch Signal and Motor Wires are Shielded
29:17 Conclusion and Final Thoughts

Additional resources:

A comprehensive list of 3D resins with mechanical properties and printer settings is available at BuildyCNC.com: buildyourcnc.com/3dresins.aspx

For personalized assistance or product inquiries, text the number displayed on the BuildyCNC.com website.
Don't forget to like, subscribe, and leave your questions or comments below!
#CNCElectronics #ShieldingTechniques #ElectronicsGuide #DIYElectronics
Shielding CNC Electronic Wires - How to Eliminate EMI (Interference)!Vertical Laser XL (Large Format Laser Cutter) Cutting PlexiglassblackToothv2 Laser Cutter and Engraver Assembly Instructions Part 4Spindle and VFD (Variable Frequency Drive) Setup Part 117. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 425. How to Interface an LCD to an ARM Microcontroller Tutorial - Part 12CNC Beginner Overview - One Demonstration of the CAD, CAM and CNC Milling ProcessLaser Cutting Tests on the Vertical Laser XL - .22 Plexiglass with 2 Focal LensPlasma Cutter Electronics   A CNC Retrofit Using the Pokeys57CNC and the Proma THCblackTooth Assembly Instructions Part 62) STM32 ARM Microcontroller Tutorial: Setting Up the Prototyping EnvironmentLast Daily Live Stream. Discord: https://buildyourcnc.com/discord
BuildYourCNC |

Shielding CNC Electronic Wires - How to Eliminate EMI (Interference)!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER