Uploaded October 2026 | Updated November 2026, 3 days ago
A demonstration of speed, accuracy and ease of installation of prefabricated Shearail® in comparison to individual links/stirrups. MAX FRANK Shearail® is up to 5x faster to install than loose links and a time/cost saving of around 80% can be achieved by using Shearail®. Using the same column, it took one fixer less than 20 minutes to install Shearail® and two fixers 50 minutes to install re-bar links. Shearail® produced a saving of 1 hour 20 minutes on the column compared to loose links! For a 20-floor scheme, the Contractor could recoup around 20 days from the construction plan by installing Shearail®.
Shearail® is the only punching shear solution on the market which is approved by both BBA and CARES.
Some FAQs about Sherail® punching shear reinforcement:
1. What is the difference between Shearail® and individual rebar links?
Shearail®® is a prefabricated punching shear reinforcement system consisting of double-headed steel studs welded to non-structural rails. Individual rebar links are loose reinforcement bars that must be positioned and fixed individually around the column. Both solutions provide punching shear reinforcement, but differ in their design, detailing and installation.
2. Does Shearail® provide the same structural performance as individual rebar links?
Shearail® is designed to increase a concrete slab's resistance to punching shear and is independently tested and approved for its intended applications. Its design and detailing must follow the applicable design requirements and product approval. Engineers should assess the appropriate solution for the specific slab, loading conditions and project requirements.
3. Can Shearail® be designed to Eurocode 2 (EC2)?
Yes. Shearail® is designed for use in accordance with Eurocode 2 and the applicable UK National Annex. MAX FRANK also provides dedicated design software to support engineers with punching shear calculations and reinforcement layouts.
4. What happens if the column layout or slab design is complicated?
Column positions, slab geometry, edge conditions and openings can all influence punching shear design and reinforcement detailing. Shearail® is supported by specialist design assistance and software to help engineers develop suitable reinforcement layouts, including for more complex design conditions. The final arrangement must be verified for the specific project.
5. What approvals and certifications should engineers look for when specifying punching shear reinforcement?
Engineers should check that the selected system has appropriate independent technical approval and supporting evidence for its intended application. Shearail® holds both British Board of Agrément (BBA) certification and CARES technical approval, providing assurance through independent assessment and verification.
6. Is Shearail® quicker to install than individual rebar links?
Shearail® is supplied as prefabricated rails, allowing multiple studs to be positioned together rather than fixing individual links one at a time. This can significantly reduce installation time and labour requirements. The actual time saving depends on the slab design, reinforcement congestion, site conditions and installation team.
7. How many steel fixers are needed to install Shearail® compared with individual links?
The labour requirement depends on the project and installation conditions. However, because Shearail® is prefabricated, it can simplify the installation process and reduce the number of individual fixing operations. This is particularly relevant when comparing the time taken by one steel fixer installing Shearail® with two steel fixers installing individual links.
8. Is Shearail® more expensive than individual rebar links?
The material price alone does not tell the whole story. Contractors should also consider installation labour, fixing time and the impact on the construction programme. Although individual links may appear cheaper on a material-only basis, Shearail®'s prefabricated design can help reduce the overall installed cost. The outcome will depend on the specific project.
More information
_______________________________________
maxfrank.com/shearail
Social media
_______________________________________
Youtube: youtube.com/@MAXFRANKGroup
LinkedIn: linkedin.com/company/max-frank-group
Instagram: instagram.com/accounts/login/?next=/maxfrankgroup
Contact
_______________________________________
Max Frank GmbH & Co. KG
Mitterweg 1
DE-94339 Leiblfing
Tel: +49 9427 189-0
info@maxfrank.de
maxfrank.com
A demonstration of speed, accuracy and ease of installation of prefabricated Shearail® in comparison to individual links/stirrups. MAX FRANK Shearail® is up to 5x faster to install than loose links and a time/cost saving of around 80% can be achieved by using Shearail®. Using the same column, it took one fixer less than 20 minutes to install Shearail® and two fixers 50 minutes to install re-bar links. Shearail® produced a saving of 1 hour 20 minutes on the column compared to loose links! For a 20-floor scheme, the Contractor could recoup around 20 days from the construction plan by installing Shearail®.
Shearail® is the only punching shear solution on the market which is approved by both BBA and CARES.
Some FAQs about Sherail® punching shear reinforcement:
1. What is the difference between Shearail® and individual rebar links?
Shearail®® is a prefabricated punching shear reinforcement system consisting of double-headed steel studs welded to non-structural rails. Individual rebar links are loose reinforcement bars that must be positioned and fixed individually around the column. Both solutions provide punching shear reinforcement, but differ in their design, detailing and installation.
2. Does Shearail® provide the same structural performance as individual rebar links?
Shearail® is designed to increase a concrete slab's resistance to punching shear and is independently tested and approved for its intended applications. Its design and detailing must follow the applicable design requirements and product approval. Engineers should assess the appropriate solution for the specific slab, loading conditions and project requirements.
3. Can Shearail® be designed to Eurocode 2 (EC2)?
Yes. Shearail® is designed for use in accordance with Eurocode 2 and the applicable UK National Annex. MAX FRANK also provides dedicated design software to support engineers with punching shear calculations and reinforcement layouts.
4. What happens if the column layout or slab design is complicated?
Column positions, slab geometry, edge conditions and openings can all influence punching shear design and reinforcement detailing. Shearail® is supported by specialist design assistance and software to help engineers develop suitable reinforcement layouts, including for more complex design conditions. The final arrangement must be verified for the specific project.
5. What approvals and certifications should engineers look for when specifying punching shear reinforcement?
Engineers should check that the selected system has appropriate independent technical approval and supporting evidence for its intended application. Shearail® holds both British Board of Agrément (BBA) certification and CARES technical approval, providing assurance through independent assessment and verification.
6. Is Shearail® quicker to install than individual rebar links?
Shearail® is supplied as prefabricated rails, allowing multiple studs to be positioned together rather than fixing individual links one at a time. This can significantly reduce installation time and labour requirements. The actual time saving depends on the slab design, reinforcement congestion, site conditions and installation team.
7. How many steel fixers are needed to install Shearail® compared with individual links?
The labour requirement depends on the project and installation conditions. However, because Shearail® is prefabricated, it can simplify the installation process and reduce the number of individual fixing operations. This is particularly relevant when comparing the time taken by one steel fixer installing Shearail® with two steel fixers installing individual links.
8. Is Shearail® more expensive than individual rebar links?
The material price alone does not tell the whole story. Contractors should also consider installation labour, fixing time and the impact on the construction programme. Although individual links may appear cheaper on a material-only basis, Shearail®'s prefabricated design can help reduce the overall installed cost. The outcome will depend on the specific project.
More information
_______________________________________
maxfrank.com/shearail
Social media
_______________________________________
Youtube: youtube.com/@MAXFRANKGroup
LinkedIn: linkedin.com/company/max-frank-group
Instagram: instagram.com/accounts/login/?next=/maxfrankgroup
Contact
_______________________________________
Max Frank GmbH & Co. KG
Mitterweg 1
DE-94339 Leiblfing
Tel: +49 9427 189-0
info@maxfrank.de
maxfrank.com










