Uploaded February 2026 | Updated November 2026, 6 hours ago
Sponsored by Woodcraft! woodcraft.com/start
And by the generous contributions of our patrons: patreon.com/woodtalk
It’s show #600 - On today’s show, we’re talking about color matching, tigerwood workbench, and wood on a metal lathe.
What's on the Bench
- Marc is making a book press.
- Matt is starting on his breakfast bench project.
- Shannon blew up his other knee while doing a sawing demo. He is OLD!
Kickback
- Paul recommends FreeCAD as a SketchUp alternative that he finds similar to many of the higher powered solutions on the market.
- Hamilton gravitated to wax finishes due the safety and health aspects as he found so many other finish products had harmful VOC levels.
- Dick says, "yep that's actually my name", and "yes, its normal sized"
Questions
- Bob asks about using color and toning finishes as all his experience lies in clear coat finishes.
- Greg asks about the differences between metal and wood lathes and what will suit his needs.
- Amy has a bunch of Tigerwood 1x6 laying around and asks about using it for a workbench.
Store Events:
Don’t miss Alex Snodgrass’ Next Cut Tour: woodcraft.com/pages/alex-snodgrass-the-next-cut-tour
2/20-2/21 - Orlando
2/22-2/23 - Clearwater
2/24-2/25 - Birmingham
2/26-2/27 - Atlanta
Woodcraft often has local club meetings in their stores too!
- Virginia Beach, VA: Tidewater Woodworkers Guild Meeting Monday, February 23
- Dayton, OH: Miami Valley Wood Carvers Carve-in, Tuesday, February 17
Ask Us a Question
Our questions primarily come from our generous Patrons. You can also send in questions via the contact form: woodtalkshow.com/questions
Or you can hit us up on Instagram at: instagram.com/woodtalkshow
And you can even send us an email or voicemail at woodtalkshow@gmail.com
Finally, you can find us individually at @MattCremona-zo4cc, @woodwhisperer, and @RenaissanceWW
Sponsored by Woodcraft! woodcraft.com/start
And by the generous contributions of our patrons: patreon.com/woodtalk
It’s show #600 - On today’s show, we’re talking about color matching, tigerwood workbench, and wood on a metal lathe.
What's on the Bench
- Marc is making a book press.
- Matt is starting on his breakfast bench project.
- Shannon blew up his other knee while doing a sawing demo. He is OLD!
Kickback
- Paul recommends FreeCAD as a SketchUp alternative that he finds similar to many of the higher powered solutions on the market.
- Hamilton gravitated to wax finishes due the safety and health aspects as he found so many other finish products had harmful VOC levels.
- Dick says, "yep that's actually my name", and "yes, its normal sized"
Questions
- Bob asks about using color and toning finishes as all his experience lies in clear coat finishes.
- Greg asks about the differences between metal and wood lathes and what will suit his needs.
- Amy has a bunch of Tigerwood 1x6 laying around and asks about using it for a workbench.
Store Events:
Don’t miss Alex Snodgrass’ Next Cut Tour: woodcraft.com/pages/alex-snodgrass-the-next-cut-tour
2/20-2/21 - Orlando
2/22-2/23 - Clearwater
2/24-2/25 - Birmingham
2/26-2/27 - Atlanta
Woodcraft often has local club meetings in their stores too!
- Virginia Beach, VA: Tidewater Woodworkers Guild Meeting Monday, February 23
- Dayton, OH: Miami Valley Wood Carvers Carve-in, Tuesday, February 17
Ask Us a Question
Our questions primarily come from our generous Patrons. You can also send in questions via the contact form: woodtalkshow.com/questions
Or you can hit us up on Instagram at: instagram.com/woodtalkshow
And you can even send us an email or voicemail at woodtalkshow@gmail.com
Finally, you can find us individually at @MattCremona-zo4cc, @woodwhisperer, and @RenaissanceWW










