Uploaded October 2017 | Updated September 2026, 1 week ago
Today we are going look at my outdoor holiday lighting configuration, which is centered around the Fibaro RGBW Micro Controller and TinKin IP67 RGBW LED strips. This is a Z-wave controller that will work with the Samsung SmartThings hub.
Affiliate Product Links:
Wink Hub 2 : amzn.to/2wIdcmh
SmartThings Gen 2 : amzn.to/2wN12E2
RGBW LED Strips 16 ft 12 VDC : amzn.to/2fHLZG6
LEDENET 5pin Male Connector Wire Cable : amzn.to/2yvQ2wV
ABI 12 Volt Power Supply : amzn.to/2z4Gs3n
CableTek CT5 Outdoor Utility Enclosure : amzn.to/2zlpGOH
Fibaro RGBW Micro Controller Z-wave : amzn.to/2xCZSQG
16 AWG Low Voltage Outdoor Landscape Lighting Cable : amzn.to/2wSo4dx
Tinkin Light IP67 Waterproof 16.4ft Flexible RGBW : amzn.to/2z3KfOs
EvZ 5 Color 10m RGBW Extension Cable : amzn.to/2z4KetM
JacobsParts Male and Female DC Power Jack : amzn.to/2hDQ4ez
Hubbel Bell Plastic Outlet Box Single Gang : amzn.to/2gPWXtt
Useful Videos:
Start Your Smart Home Part 1 - Home Automation Hubs : youtu.be/xEMcqQE6Rlc
Start Your Smart Home Part 2 - Lighting : youtu.be/e_2vb5IQ_y0
How to Solder Wires : youtu.be/Zu3TYBs65FM
OSRAM Lightify Flex Strips Review : youtu.be/cZSD8Yn60oM
It all starts with this Fibaro RGBW Micro Controller. This controller works with either 12 or 24 volts DC and has the ability to control the red, green, blue and white channels on standard LED strips.
Now it’s time to bring this into my smart home. Obviously this is meant to work with the Fibaro Home Center Hub, which I don’t have. I tried it on my Wink Hub 2, but it only controlled the On-Off and not the colors.
In the SmartThinks hub, the white light channel stayed on constantly, so I had to remove the white wire from the controller.
DIY Smart Home Guy Websites:
Support This Channel: patreon.com/diysmarthomeguy
Website: azhb.com
Facebook: facebook.com/diysmarthomeguy
Twitter: twitter.com/diysmarthomeguy
Where I buy Domain Names: bit.ly/2m7zuEd
Today we are going look at my outdoor holiday lighting configuration, which is centered around the Fibaro RGBW Micro Controller and TinKin IP67 RGBW LED strips. This is a Z-wave controller that will work with the Samsung SmartThings hub.
Affiliate Product Links:
Wink Hub 2 : amzn.to/2wIdcmh
SmartThings Gen 2 : amzn.to/2wN12E2
RGBW LED Strips 16 ft 12 VDC : amzn.to/2fHLZG6
LEDENET 5pin Male Connector Wire Cable : amzn.to/2yvQ2wV
ABI 12 Volt Power Supply : amzn.to/2z4Gs3n
CableTek CT5 Outdoor Utility Enclosure : amzn.to/2zlpGOH
Fibaro RGBW Micro Controller Z-wave : amzn.to/2xCZSQG
16 AWG Low Voltage Outdoor Landscape Lighting Cable : amzn.to/2wSo4dx
Tinkin Light IP67 Waterproof 16.4ft Flexible RGBW : amzn.to/2z3KfOs
EvZ 5 Color 10m RGBW Extension Cable : amzn.to/2z4KetM
JacobsParts Male and Female DC Power Jack : amzn.to/2hDQ4ez
Hubbel Bell Plastic Outlet Box Single Gang : amzn.to/2gPWXtt
Useful Videos:
Start Your Smart Home Part 1 - Home Automation Hubs : youtu.be/xEMcqQE6Rlc
Start Your Smart Home Part 2 - Lighting : youtu.be/e_2vb5IQ_y0
How to Solder Wires : youtu.be/Zu3TYBs65FM
OSRAM Lightify Flex Strips Review : youtu.be/cZSD8Yn60oM
It all starts with this Fibaro RGBW Micro Controller. This controller works with either 12 or 24 volts DC and has the ability to control the red, green, blue and white channels on standard LED strips.
Now it’s time to bring this into my smart home. Obviously this is meant to work with the Fibaro Home Center Hub, which I don’t have. I tried it on my Wink Hub 2, but it only controlled the On-Off and not the colors.
In the SmartThinks hub, the white light channel stayed on constantly, so I had to remove the white wire from the controller.
DIY Smart Home Guy Websites:
Support This Channel: patreon.com/diysmarthomeguy
Website: azhb.com
Facebook: facebook.com/diysmarthomeguy
Twitter: twitter.com/diysmarthomeguy
Where I buy Domain Names: bit.ly/2m7zuEd
