Uploaded April 2022 | Updated September 2026, 3 weeks ago
🔗 MrD-RC.com 🔗 patreon.com/MrD_RC
In this video we set up a FrSky SR10 Pro in an elevons or flying wing configuration. This is a pretty straight forward task. But there is one part that is undocumented, which throws a spanner in the works for quite a few people trying this. TL;DW you don't set up the mixer for elevons.
This tutorial also applies to the S6R, S8R, SR6, and SR8 Pro receivers. I am demoing on ETHOS. But the process is the same. Ailerons on channel 1, Elevator on channel 2. Left elevon on receiver output 1, right elevon on receiver output 2. Pins to the back, enable the flying wing type in the SxR configuration.
Just as a note. In this video, I'm just showing how to set up the mixer and wing type. You still need to set up the gain, modes, and self test switches, and perform the self test functions. I show how to do that here youtube.com/watch?v=rUKIBQdmvIY&t=440s and here youtube.com/watch?v=rUKIBQdmvIY&t=1032s
✈️ Contents ✈️
00:00 Introduction
01:11 The setup for this demo
01:52 Where to plug in the elevons
02:45 Creating the model for our flying wing
04:27 Checking out the created mixer
04:59 Setting up the SxR configuration
06:39 Reversing the ailerons or elevator if we need to
07:09 Checking the stabilisation
07:49 Make sure to use Quick Mode
08:08 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
⚙️FrSky X20S transmitter: bit.ly/MrD_3x6n6JL
⚙️FrSky SR10 Pro receiver: bit.ly/MrD_3DFQeKF
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at https://www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at discord.gg/HMvrgZX6su
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows YouTube that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at patreon.com/MrD_RC
🛩 If you prefer, you could always buy me a Coffee at mrd-rc.com/go/ko-fi
🛩 I also have merch at mrd-rc.creator-spring.com This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
🔗 MrD-RC.com 🔗 patreon.com/MrD_RC
In this video we set up a FrSky SR10 Pro in an elevons or flying wing configuration. This is a pretty straight forward task. But there is one part that is undocumented, which throws a spanner in the works for quite a few people trying this. TL;DW you don't set up the mixer for elevons.
This tutorial also applies to the S6R, S8R, SR6, and SR8 Pro receivers. I am demoing on ETHOS. But the process is the same. Ailerons on channel 1, Elevator on channel 2. Left elevon on receiver output 1, right elevon on receiver output 2. Pins to the back, enable the flying wing type in the SxR configuration.
Just as a note. In this video, I'm just showing how to set up the mixer and wing type. You still need to set up the gain, modes, and self test switches, and perform the self test functions. I show how to do that here youtube.com/watch?v=rUKIBQdmvIY&t=440s and here youtube.com/watch?v=rUKIBQdmvIY&t=1032s
✈️ Contents ✈️
00:00 Introduction
01:11 The setup for this demo
01:52 Where to plug in the elevons
02:45 Creating the model for our flying wing
04:27 Checking out the created mixer
04:59 Setting up the SxR configuration
06:39 Reversing the ailerons or elevator if we need to
07:09 Checking the stabilisation
07:49 Make sure to use Quick Mode
08:08 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
⚙️FrSky X20S transmitter: bit.ly/MrD_3x6n6JL
⚙️FrSky SR10 Pro receiver: bit.ly/MrD_3DFQeKF
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at https://www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at discord.gg/HMvrgZX6su
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows YouTube that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at patreon.com/MrD_RC
🛩 If you prefer, you could always buy me a Coffee at mrd-rc.com/go/ko-fi
🛩 I also have merch at mrd-rc.creator-spring.com This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
