Uploaded October 2025 | Updated September 2026, 2 weeks ago

---

Learn how to use test mode and set DIP switch addresses on the HolidayCoro Long Range Smart 16 Version 1 receiver (#951-72).

This video shows how to enter and exit test mode on the Long Range Smart 16 v1, cycle through red, green, blue, and white output tests, and set the DIP switch positions for the correct receiver address. It also explains how this receiver uses grouped addressing because the board functions as four 4-output smart receivers combined into one 16-output receiver.

This tutorial is helpful for HolidayCoro customers setting up daisy chained Long Range Smart 16 receivers and needing to understand address positions 0 through 15. It also covers the factory default setting, how address groups advance in blocks of four, and how to select the correct DIP switch position for standalone setup, troubleshooting, and multi-receiver installations.

See: holidaycoro.com/longrange

holidaycoro.com/Flex-Long-Range-Differential-Receiver-16-SPI-SMART-p/951-72.htm

holidaycoro.com/Ready2Run-16-SPI-Long-Range-SMART-Receiver-700w-p/938.htm