Uploaded October 2026 | Updated November 2026, 3 days ago
10:56 for the actual explanation of the plumbing.
A terriffically boring video for most, However, its hard to find information about how an overinflate system should be installed. The downside to the deep back end trailer is how low they sit in the chute. Especially for feeder pigs etc, however with the cable deck trailers it becomes a much bigger problem when trying to haul freight. if you cant hit the dock height then the forklift will struggle or not even fit. So most cable deck trailers are specced with an over inflate system. I didn't know how it works so i decided to figure it out while troubleshooting a suspension problem on this trailer. Turns out it is quite simple and i explain the routing at the end of the video if you want to install a similar system. The biggest problem i see is people simply adding a diverter valve to bypass the leveling valve or the add the 221 valve BEFORE the leveling valve and then it just leaks the whole time. I show how it should be plumbed to prevent this.
the valves are a Rideair RA221 or an AK12392MR
I show the logic at the end of the video.
10:56 for the actual explanation of the plumbing.
A terriffically boring video for most, However, its hard to find information about how an overinflate system should be installed. The downside to the deep back end trailer is how low they sit in the chute. Especially for feeder pigs etc, however with the cable deck trailers it becomes a much bigger problem when trying to haul freight. if you cant hit the dock height then the forklift will struggle or not even fit. So most cable deck trailers are specced with an over inflate system. I didn't know how it works so i decided to figure it out while troubleshooting a suspension problem on this trailer. Turns out it is quite simple and i explain the routing at the end of the video if you want to install a similar system. The biggest problem i see is people simply adding a diverter valve to bypass the leveling valve or the add the 221 valve BEFORE the leveling valve and then it just leaks the whole time. I show how it should be plumbed to prevent this.
the valves are a Rideair RA221 or an AK12392MR
I show the logic at the end of the video.










