Uploaded April 2011 | Updated November 2026, 3 hours ago
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
So here's our example of finish plastering using earthen plaster on this wattle and daub sample. Several people did this. You just use the edge of your hand right here. Just put on a thin layer. So the edge of your hand becomes like a trowel. You could do this with a trowel, but we're using our hands to show the simplest way. Same basic mixture (as first coat) except the straw is chopped into smaller pieces. Be careful not to use too much moisture or it will crack. Use fairly thin layers on the finish coats. You could put one or two more on top of this. You can also take a yogurt lid or piece of plastic and you can go around and make it smoother and smoother. That's it, very simple. You don't need to use a trowel, but this is a good shape to have (curved trowel). And a pointed trowel like this is good for along edges and in corners. I'm demonstrating this to show how you can flatten it -- get it flatter and better with a trowel. You're basically just cutting away -- see -- you cut away from the high places as you're troweling and you can put that into a low spot. Like here's a low spot. So you can work it. Get your trowel wet and you can continue to smooth it as much as you want. It could be as smooth as glass. And this is only the second coat. You can keep doing this over and over until it's polished. (Or use a less than perfect finish.)
So we're just playing around here just a little bit to demonstrate the possibilities. But you can see it's getting harder and flatter, smoother and what's happening is you're removing material from the high places, depositing it in the low areas, so you're flattening it a little at a time. The clay platelets (particles) are realigning. You're compressing the clay platelets and creating a harder, stronger surface. Of course a professional would do this same thing but much faster, but this is the basic process that they're using.
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
So here's our example of finish plastering using earthen plaster on this wattle and daub sample. Several people did this. You just use the edge of your hand right here. Just put on a thin layer. So the edge of your hand becomes like a trowel. You could do this with a trowel, but we're using our hands to show the simplest way. Same basic mixture (as first coat) except the straw is chopped into smaller pieces. Be careful not to use too much moisture or it will crack. Use fairly thin layers on the finish coats. You could put one or two more on top of this. You can also take a yogurt lid or piece of plastic and you can go around and make it smoother and smoother. That's it, very simple. You don't need to use a trowel, but this is a good shape to have (curved trowel). And a pointed trowel like this is good for along edges and in corners. I'm demonstrating this to show how you can flatten it -- get it flatter and better with a trowel. You're basically just cutting away -- see -- you cut away from the high places as you're troweling and you can put that into a low spot. Like here's a low spot. So you can work it. Get your trowel wet and you can continue to smooth it as much as you want. It could be as smooth as glass. And this is only the second coat. You can keep doing this over and over until it's polished. (Or use a less than perfect finish.)
So we're just playing around here just a little bit to demonstrate the possibilities. But you can see it's getting harder and flatter, smoother and what's happening is you're removing material from the high places, depositing it in the low areas, so you're flattening it a little at a time. The clay platelets (particles) are realigning. You're compressing the clay platelets and creating a harder, stronger surface. Of course a professional would do this same thing but much faster, but this is the basic process that they're using.






![Low Fired Brick
Go to our Natural Building Blog where we answer questions.
http://naturalbuildingblog.com
These low fired bricks are extremely practical, low cost and a great way to build with. Millions of houses all over the world are built with these low fired bricks. Its [made with] clay, just like a clay flowerpot terra cotta fired at low temperature so it doesnt take a lot of energy. In fact, around here they make these by burning rice hulls. They take waste rice hulls, fire the kiln with rice hulls and after two days or so the bricks are finished. Theyre rot proof, fireproof, very easy to work with. They take an old engine from a truck, hook it up to a pugmill. You can see how the clay has been extruded. They cut it off to length and let them dry in the sun and then fire them. You can get the details on the Mother Earth News Blog and our websites. Google low fired brick and my name and youll find articles on this and just every topic you see on [my YouTube site]. Low Fired Brick](https://i.ytimg.com/vi/JKfkMjho9CY/mqdefault.jpg)



