Sealing variants for tie holes @MAXFRANKGroup
Sealing variants for tie holes  @MAXFRANKGroup
Uploaded October 2023 | Updated November 2026, 3 hours ago
Find out in our video about the variants MAX FRANK offers for sealing tie holes in concrete walls.

After concreting and stripping, voids remain in the concrete wall that can be professionally closed with sealing cones and plugs made of fibre-reinforced concrete or by filling them with our special mortar.
Various sealing methods are available depending on visual, structural, weather-related or construction requirements.

Sealing variants presented in the video:

1) Bonding with fibre-reinforced concrete cones
This visually sophisticated variant delivers impressive results. However, bonding must take place at temperatures above 5°C. The sealing cones are bonded with Repoxal®, which has been tried and tested for years. This system meets the requirements for sound insulation, fire protection and exposure to pressurised water.

2) Backfilling with special cement-based mortar
This variant is particularly suitable for complete backfilling of fire walls with low-shrinkage mortar. Use MAX FRANK special mortar 3/25 for this purpose.

3) Fibre-reinforced concrete sealing plugs
This specially developed variant also makes it possible to seal the clamping points at sub-zero temperatures, as no gluing is necessary here. This variant also offers an attractive appearance and can achieve a tightness of up to 5 bar water column if processed correctly. You can choose from different versions of sealing plugs.

More information: maxfrank.com/intl-en/products/spacers/06-sealing-cones-and-sealing-plugs

MAX FRANK Group
maxfrank.com
Sealing variants for tie holesMauerstärken EIgenschaftenSchneller betonieren, aber sicher: So hält Stremaform® Wände stabil!Thermally insulated foundation formwork with Pecafil®Effiziente Kellerbauweise mit Elementwänden in WU-Bauweise – schnell, sicher und wirtschaftlichFlach vs. Verzahnt – Wann brauche ich EC2-konformes Stremaform®?Baugrubenverbau: Kleine Anpassung der Abstützung, große Wirkung auf die Durchbiegung.Stremaform® Back Anchoring: The Ultimate Solution for Concrete Pressure | Watch How It Works!Gießbeton vs. Faserbeton: Fertigung, Vorteile & Druckfestigkeit erklärtEfficient foundation formwork with minimal effort: Using Pecafil®Bemessungssoftware und Einbauteil-Generatoren (Allplan®) für den Egcodorn® QuerkraftdornPecafil® Fundamentschalung erspart bauseitige Aussteifungen
MAX FRANK Group |

Sealing variants for tie holes

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER