SDG #374 Smart Home Lighting: Adding Wireless DMX to My ESP32 Controller @sdgelectronics
SDG #374 Smart Home Lighting: Adding Wireless DMX to My ESP32 Controller  @sdgelectronics
Uploaded October 2026 | Updated November 2026, 3 hours ago
Sponsored by JLCPCB: jlcpcb.com/pcb-assembly?from=CCIP
#jlcpcb #pcba

HARDWARE IN THIS VIDEO
Waveshare ESP32-S3 4-inch touchscreen (wall controller): https://s.click.aliexpress.com/e/_c40RDwNJ
Waveshare ESP32-S3 4.3-inch touchscreen (receiver): https://s.click.aliexpress.com/e/_c4KYsG7j
Micsig MHO14-200 oscilloscope from eVision: https://evision-webshop.eu/micsig/mho14-200-oscilloscope

Waveshare supplied the displays and eVision supplied the oscilloscope. Some links in this description are affiliate links: I may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

I’m adding wireless DMX to my ESP32 touchscreen lighting controller using ESP-NOW and a Waveshare 4.3-inch touchscreen receiver. The aim is simple: keep the lighting scenes at the wall without chasing out another cable for DMX.

The original 4-inch touch dimmer already controls my smart-home lighting boards over wired DMX. In this update, I start with a simple ESP-NOW experiment, add wireless level transmission to the existing controller, and build a receiver with 16 channel meters, pairing, link diagnostics, smoothing, signal-loss handling and local test controls. I then check the DMX output on the oscilloscope and try it with a real light.

PROJECT ARTICLE & FIRMWARE
Full project article, diagrams and current firmware features:
sdgelectronics.co.uk/articles/esp32-wireless-dmx-touch-dimmer
Contact Steve at SDG Electronics for more details about the firmware.

EARLIER VIDEOS
#359 — The original touch controller and DMX dimmer investigation
youtube.com/watch?v=eh2oIPa6GBQ
#360 — Mounting the square touchscreen on a UK back box
youtube.com/watch?v=moburaT5u58
#230 — My custom lighting boards and AC LED dimmer modules
youtube.com/watch?v=cGZwVD2CWgc

Would you use a touchscreen scene controller for your lighting? Let me know which features you would add, or what you would like to see explained in more detail.

CHAPTERS
0:00 My ESP32 touchscreen lighting controller
0:53 Why make the touch dimmer wireless?
1:40 The Waveshare 4.3-inch receiver hardware
4:03 JLCPCB sponsorship
5:29 Starting with LVGL on the receiver
6:31 The first ESP-NOW link
8:30 Adding wireless output to the controller
9:13 Pairing and range
9:55 Receiver display and signal loss
11:00 Link diagnostics
11:23 Raw vs smooth output and DMX settings
12:26 Local test mode
13:08 Checking the DMX output on the Micsig MHO14-200
14:07 Serial decode of the DMX data
14:55 16 vs 512 slots and output rate
15:31 Testing with a DMX light
16:22 Next steps: soak testing

--------------------------------------------------
ZIGBEE STUFF
mmWave Sensor: https://s.click.aliexpress.com/e/_Dl72u5n
Sonoff USB Dongle: https://s.click.aliexpress.com/e/_DmiX7Tf
Zigbee Hub: https://s.click.aliexpress.com/e/_DBpVimD
--------------------------------------------------
SOLDER
SolderKing UK-made solder: solderking.com
Kaisertech, UK JBC distributor (also stocks SolderKing): kaisertech.co.uk Discount code: "SDG5"
--------------------------------------------------
3D PRINTERS
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M on AliExpress: bit.ly/3oBqo2I
Ender 3 V2 on AliExpress: bit.ly/3j1C2CO
Geeetech PLA+ Filament: amzn.to/3gelSX1
--------------------------------------------------
SOLDERING TOOLS AND EQUIPMENT
Aixun T420D on AliExpress: bit.ly/3cQXXhh
Aixun T3B on AliExpress: bit.ly/3CHerj1
Aixun T3B on AliExpress: bit.ly/3cDkWIY
Aixun T3A on AliExpress: bit.ly/30LDcgG
Aixun T3A on AliExpress: bit.ly/2VdRVhU
Aixun T380 on AliExpress: https://s.click.aliexpress.com/e/_DmM0zFZ
Yihua 853A Preheater: banggood.com/custlink/DGDDWeEuz6
Youyue 946C Hotplate on AliExpress: bit.ly/374v3Tp
T12 Iron Tips: banggood.com/custlink/3DG3CHZ1SD
Which solder flux? My comparison video: bit.ly/2MQn7we
--------------------------------------------------
MICROSCOPE EQUIPMENT
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope (US): amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope (UK): amzn.to/2GYGYFV
--------------------------------------------------
Visit my website: sdgelectronics.co.uk

#ESP32 #ESPNOW
SDG #374 Smart Home Lighting: Adding Wireless DMX to My ESP32 ControllerSDG #189 JLCPCB NEW UPDATES to SMT Assembly Service!SDG #358 AxxSolder - Open Source JBC Soldering SystemSDG #284 130W Capable JBC C245 Soldering IronSDG #240 Repair and analysis of a Varilight V-Pro AC LED Dimmer ModuleSDG #249 JBC Nitrogen Soldering Station (JBC KNE-A Nitrogen Kit) with SolderKing solderSDG #326 A copper core PCB with tiny 1.4mm Luxeon Rubix LEDsSDG #187 All about PCBWays Turnkey Assembly ServiceSDG #272 Thinkcar THINKSCAN Max 2 OBD-II Diagnostic Tool ReviewSDG #281 A festive auto colour change RGB LED hack youve never seen before!SDG #352 Quick TS11 Intelligent Soldering StationSDG #338 Sequre ES555 and ES666 Electronic USB Screwdrivers
SDG Electronics |

SDG #374 Smart Home Lighting: Adding Wireless DMX to My ESP32 Controller

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER