Sandia Prototype for Robotic Consolidation of Commercial Spent Nuclear Fuel @SandiaLabs

Uploaded April 2024 | Updated September 2026, 1 week ago

The repackaging of spent fuel rods into modern casks has high initial costs and presents workforce risk due to radiation hazards. To lower the costs and reduce risk to operators, Sandia National Laboratories prototyped a robotic system to automate the repackaging of spent nuclear fuel rods. This prototype simulates the process in a laboratory setting using half-sized mock fuel rods. A potential final design would be deployed in a spent nuclear fuel pool.

SAND2024 03149V

Sandia Prototype for Robotic Consolidation of Commercial Spent Nuclear Fuel

R&D 100 Entry 2023: Colormetric Radiation Sensor (See-UV)

$Research Capabilities of Sandias Geomechanics Laboratories Walter Hermann founded the Geomechanics Department and Geomechanics Laboratory in 1972–1973 to support weapons programs, primarily nuclear testing, effects, and containment studies at the Nevada Test Site. Since then, the Sandia Geomechanics Department has developed a variety of laboratory proficiencies and numerical modeling expertise that support environmental management, nuclear nonproliferation, defense and industry, and basic energy sciences. The Geomechanics Department’s experimental facilities enable study of complex processes and systems through measurement of coupled mechanical, thermal, hydrologic, and chemical properties under a wide range of conditions including very high pressures (1 GPa) and complex load paths. Using both standard and unique capabilities, customer needs for assessment of geomaterial response to natural and engineered conditions are addressed through the design and conduct of sophisticated experiments. JASON (2014) declared the Geomechanics Laboratory to be the flagship facility of its type for the National Nuclear Security Administration and Department of Energy, highlighting its high pressure triaxial and other testing capabilities, available as a DOE user facility well into the foreseeable future. Making predictions of complex multiphysics response of geomaterials requires quantitative models of the governing deformation, fracture processes, fluid flow, or other behaviors. Building constitutive models and performing analytic and numerical calculations requires information about specific rock properties. Sandias geomechanics laboratories experimentally simulate in situ conditions at depth in the earth with high pressure, differential stresses, multi-phase fluid flow, high strain rates (10^4 /s), and elevated temperature. The Geomechanics Department’s expertise lies in both validating and developing constitutive models. SAND 2021-1421V$

Sandia’s Spent Nuclear Fuel Assembly Drop Test

FOSWEC Modeling and Control Design Testing

R&D100 Winner 2024: Low-cost Direct Air Capture of CO2 with Clay nano interlayers (LDAC3)

R&D 100 Entry 2022: Multi-frame Moving Object Detection System (MMODS)

Spectra: Sandia’s Unconventional Supercomputer

Solar Tower Testing for the Defense Threat Reduction Agency

Sandia Interactive Wave Energy Education Display