Uploaded November 2025 | Updated November 2026, 3 hours ago
This Samsung fridge (model RFG23UERS) has been working fine since January 2015, until the ice maker stopped working 10.5 years later.
I checked that water was reaching the icemaker, tried the mysterious 'test button' on the ice maker module and also tried the 'forced defrost' mode, that's accessible via the front panel. Nothing helped, so the next step was to swap in a replacment ice maker module DA97-07592B from espares.co.uk
All working again :)
Note: It didn't come up for me but @xsherlockpl has kindly pointed out that the fridge will not work while the ice maker's removed. Best to get the replacement part first & then make a quick swap.
P.S. The Test/Reset button on the ice maker module should force a cycle that demonstrates that the motor runs, the ejector arms move, and water inlet valve operates. If nothing happens something's wrong with the module (as in my case). See samsung.com/us/support/troubleshooting/TSG01207806
P.P.S. @xsherlockplIf spotted the homemade, 3D printed 'ice catcher' fitted on our fridge. If you have one of these fridges and would like an 'ice catcher' that replaces the original Samsung drip tray - please go here thingiverse.com/thing:7221459 for the STL & CAD files
This Samsung fridge (model RFG23UERS) has been working fine since January 2015, until the ice maker stopped working 10.5 years later.
I checked that water was reaching the icemaker, tried the mysterious 'test button' on the ice maker module and also tried the 'forced defrost' mode, that's accessible via the front panel. Nothing helped, so the next step was to swap in a replacment ice maker module DA97-07592B from espares.co.uk
All working again :)
Note: It didn't come up for me but @xsherlockpl has kindly pointed out that the fridge will not work while the ice maker's removed. Best to get the replacement part first & then make a quick swap.
P.S. The Test/Reset button on the ice maker module should force a cycle that demonstrates that the motor runs, the ejector arms move, and water inlet valve operates. If nothing happens something's wrong with the module (as in my case). See samsung.com/us/support/troubleshooting/TSG01207806
P.P.S. @xsherlockplIf spotted the homemade, 3D printed 'ice catcher' fitted on our fridge. If you have one of these fridges and would like an 'ice catcher' that replaces the original Samsung drip tray - please go here thingiverse.com/thing:7221459 for the STL & CAD files










