WYOMINGWOODTURNER | Salt and Pepper Cellars with a Swinging Lid (new design) Woodturning with Sam Angelo @WYOMINGWOODTURNER | Uploaded May 2022 | Updated October 2024, 3 hours ago.
Sam turns a salt and pepper cellar set with swinging lids. This is a gift for his son and daughter-in-law. The video is a step-by-step process for turning a cellar that could be used for any spices. The location of the pivot point and 1/2 rare earth magnet may be a totally new approach for the swinging lid's design. Video details include gluing up the base, shaping the lid and turning the bottom of the piece.
Check out the chapter "time stamps" below to locate each topic for completing this project.
Chapter Timestamps-
Click on the time and jump to the topic listed
00:00 Introduction
02:15 The project explained
03:30 Planning the project details
08:32 Cutting the cherry parts for the base
11:10 Gluing the base together
15:59 Template for the lid
18:24 Turning the bottom of the base at the lathe
23:00 Profiling the outside of the base
25:30 Grain direction for this project
28:46 Working on the lid
33:35 Routing a round over on the lid
36:50 Finishing the lid and base
37:10 Conclusion and more photos of the finished
projects
If you are interested in an American Beauty Lathe, please contact me at samandcheryle@gmail.com for details
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Sam turns a salt and pepper cellar set with swinging lids. This is a gift for his son and daughter-in-law. The video is a step-by-step process for turning a cellar that could be used for any spices. The location of the pivot point and 1/2 rare earth magnet may be a totally new approach for the swinging lid's design. Video details include gluing up the base, shaping the lid and turning the bottom of the piece.
Check out the chapter "time stamps" below to locate each topic for completing this project.
Chapter Timestamps-
Click on the time and jump to the topic listed
00:00 Introduction
02:15 The project explained
03:30 Planning the project details
08:32 Cutting the cherry parts for the base
11:10 Gluing the base together
15:59 Template for the lid
18:24 Turning the bottom of the base at the lathe
23:00 Profiling the outside of the base
25:30 Grain direction for this project
28:46 Working on the lid
33:35 Routing a round over on the lid
36:50 Finishing the lid and base
37:10 Conclusion and more photos of the finished
projects
If you are interested in an American Beauty Lathe, please contact me at samandcheryle@gmail.com for details
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
