S124 Working front SLS suspension part 2 @JMSpeedshop
S124 Working front SLS suspension part 2  @JMSpeedshop
Uploaded April 2022 | Updated November 2026, 14 hours ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Patreon: patreon.com/jmspeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter

S124 front suspension is working!

The car is going up and down and is holding pressure.  So i don't have any leaks internal through the level valve. Also no external leaks on coupling or so.  Pumping up the car is now through the old hydraulic pomp controlled with a drill bit.

I have filled the shocks with oil in lowest postion before connecting the lines.  Also blead out the system. up to the shock connection.  When i did this i was already 2.5 ltrs in before i filled up both side's what i think is a lot. 

Also the suspension feels rock hard.  I suspect that both sides the spring accumulator is not holding any nitrogen pressure any more. This also because when i turn the pump the car raising directly.  normally you would expect some pressure build up in the spring accumulators.  because the hold 23 bars.

The spring accumulators where also 2 that i had laying around.  and are not new and i did not now the condition at all. I also tested the 2 flow reducers valves.  If i close these complete the cars feels the same in the front also rock hard.

My custom adapters in the top connection of the shock absorbers also fit correct and don't have any leaks.

So what is next?  i have to see if there are some things i need to fix before the engine will go out of the car and i can fix the engine bay.  do some rust repairs and paint the engine bay.  Also the engine needs to be cleaned and a partly rebuild.  transmission needs check and valve body clean. So this is a very nice point in the build process

If there are any questions  just ask
S124 Working front SLS suspension part 2Maxx Ecu E-throttle and Red Seats and Carpet in the car. S124 V8 turboM113 V8 intake manifold turning 180° S124 turbo projectLeder interior repair, restore & color change Mercedes 2.3 16V interiorOFgear TCU installation, 722.6 shifter repair and  External speed InputMercedes 190 V12 last fitment !!  project build by JMSpeedshop !CLS63 AMG VS CLS 55 AMG 0-200KPH acceleration JMSpeedshop !Corvette C4 convertible Review & Testdrive JMSpeedshop !FlowTesting s210 steering tandem pump for the S124 v8 turboMaybach 57  it is so quiet! Review & Testdrive JMSpeedshop !New engine + driveline?  unpacking   New project?Getting The W201 V12 Swap Street Legal
JMSpeedshop ! |

S124 Working front SLS suspension part 2

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER