Uploaded May 2024 | Updated November 2026, 10 hours ago
In keeping with my view that the rigs I build are experimenters platforms I added one more transistor to the PSSST-20 and that is for the audio derived S Meter. I sample the audio from the pre-amp stage (2N2222A) so the output is NOT affected by the Volume control and that is fed into an Analog pin on the Arduino.
Wit a bit of math magic using the log function and magic decoder ring functions. I create a varying analog signal. The display x axis of a bar (rectangle) is proportional to that analog signal. A pot on the S Meter board lets me set the travel so that S9 is closer than a barn door.
Kind of cool and no real analog meters needed.
In keeping with my view that the rigs I build are experimenters platforms I added one more transistor to the PSSST-20 and that is for the audio derived S Meter. I sample the audio from the pre-amp stage (2N2222A) so the output is NOT affected by the Volume control and that is fed into an Analog pin on the Arduino.
Wit a bit of math magic using the log function and magic decoder ring functions. I create a varying analog signal. The display x axis of a bar (rectangle) is proportional to that analog signal. A pot on the S Meter board lets me set the travel so that S9 is closer than a barn door.
Kind of cool and no real analog meters needed.










