David McCabeThis is the 2021 multiple power tool workbench tour. The table saw, router table, and mitre saw all share the same fence system. Extra infeed for the DeWalt Table Saw. DeWalt Planer also uses the bench as outfeed. Onboard power and Dust collection via Shop Vac and Dustopper
I'm not a new YouTuber but I was nervous to show something that I made. I think it showed a little bit in the video! Please leave questions or comments for me below.
I'll go over Power and Dust Collection in the next one. I promise to do much better shooting and narrating! Thanks for your patience while I transition from podcasting/tech stuff to shop work and woodworking.
2021 WorkBench Multiple Tools Share same Fence Dewalt Table Saw InfeedDavid McCabe2021-03-19 | This is the 2021 multiple power tool workbench tour. The table saw, router table, and mitre saw all share the same fence system. Extra infeed for the DeWalt Table Saw. DeWalt Planer also uses the bench as outfeed. Onboard power and Dust collection via Shop Vac and Dustopper
I'm not a new YouTuber but I was nervous to show something that I made. I think it showed a little bit in the video! Please leave questions or comments for me below.
I'll go over Power and Dust Collection in the next one. I promise to do much better shooting and narrating! Thanks for your patience while I transition from podcasting/tech stuff to shop work and woodworking.Fishers HSE Rugby Callout 2024David McCabe2024-01-11 | Just a few highlights of 2023 for the Fishers HSE Rugby Callout 2024 meeting.2019 Fishers HSE Knights End of Year VideoDavid McCabe2023-10-03 | 2019 Fishers / HSE Knights End of Year video
This video is only viewable with the direct link. It is not searchable on YT.
All music owned by artists. All ad revenue will go to those artists.FCJH 2020David McCabe2023-10-03 | FCJH 2020 Pump Video for Players and Parents
This video is marked UNLISTED. Meaning, it cannot be searched for and does not show up in my channel. However, you can link directly to it and view.The Jennie and Davis #samarabos Box of Scrap ChallengeDavid McCabe2023-02-25 | So...this thing happened. I sent Jennie and Davis a gift from pieces of scraps I purchased from them and they made a video about it. They also threw down a challenge to all scrappers so I purchased another Box of Scrap.
Here is what I got, and what I made.
Some of the items are available at warpedboards.com.Upgrade Spiral Cutterhead and Cleaning of 6 JointerDavid McCabe2023-01-19 | I'm upgrading the straight knives in this recently purchased Grizzly G0814 6" jointer. I'm using the indexable spiral cutterhead from Grizzly which is the H7653. grizzly.com/products/grizzly-6-indexable-spiral-cutterhead/h7653
This cutterhead was on sale for Black Friday 2022 and was immediately available so i picked it up.
I'm also cleaning a rust spot using Boeshield products. Let me know what questions you may have about the process. I didn't go very in depth in this video so more than happy to help if needed.I bought a box of scraps from Jennie and Davis - What can we make?David McCabe2022-12-09 | I bought a box of cut-off scraps from Jennie and Davis and will turn them into projects. Don't know J&D? Check out their YouTube channel here - youtube.com/channel/UCzTfxKT5Xv2TDXjGpGeB0tg?
UPDATE - I think I just had my 15 minutes of fame! Jennie and Davis shot a video of them unboxing the gift I made in this video. If you have watched all of mine and subscribed (ahem!) go check theirs out here - youtu.be/NupdsKrkMvs
I mostly made trays and bowls on the CNC although I have some walnut scraps that could be something cool. Leave me a comment on what to make with the rest of the scraps! I sent the logo tray to them and don't know if they accept gifts or they just trash them. Either way, I had fun seeing what a Box O' Scraps contained! These trays are for sale at: warpedboards.com This will forward you to my Square site which really sucks so if you want one of these just leave me a comment. I also have an Etsy store: etsy.com/shop/DavidMcCabeWoodworksHSE JV vs North Central - 2022David McCabe2022-08-27 | HSE JV vs North Central - 20222022 Hamilton Southeastern Royals JV vs Lawrence CentralDavid McCabe2022-08-21 | 2022 Hamilton Southeastern Royals JV vs Lawrence CentralMudsock JV Rugby March 5th, 2022 Cincinnati OHDavid McCabe2022-03-07 | Mudsock JV Rugby March 5th, 2022 Cincinnati OHHamilton SouthEastern High School Freshmen Football 2021David McCabe2021-11-03 | Hamilton SouthEastern High School
Freshmen Football 2021
8 - 1HSE Freshman Football vs Franklin Central 2021David McCabe2021-10-10 | HSE Freshman Football vs Franklin Central 2021HSE Freshmen Football vs Noblesville 2021David McCabe2021-10-06 | HSE Freshmen Football vs Noblesville 2021HSE Freshmen vs Zionsville 2021David McCabe2021-09-28 | HSE Freshmen vs Zionsville 2021HSE Freshmen vs Westfield 2021David McCabe2021-09-21 | HSE Freshmen vs Westfield 2021HSE Freshman Royals at Fishers 2021David McCabe2021-09-14 | HSE Freshman at Fishers 2021HSE Freshman Football vs AvonDavid McCabe2021-09-04 | HSE Freshman vs Avon Sept 4, 2021HSE Freshman Football vs North Central 2021David McCabe2021-08-28 | HSE Freshman Football vs North Central 2021HSE Freshman vs Lawrence Central 2021David McCabe2021-08-21 | HSE Freshman vs Lawrence Central 2021Lake Cumberland Houseboat Trip 2021David McCabe2021-07-12 | Three families of four adventure on a Jamestown Marina Houseboat. Meeting up with another family for fun on Lake Cumberland.
Make sure to catch our 2020 video on Lake Cumberland. Thanks for watching!A walk with Cicadas Brood X 2021 Central IndianaDavid McCabe2021-06-11 | A walk with Cicadas Brood X 2021 Central Indiana
Here is some video from a simple walk in our neighborhood. It's hard to describe so I hope the audio does it justice. There are sections where it really hurts your ears it is so loud. Stay until the end! Thanks for watching. Please give it a thumbs up and share!Building the Fix This Build That DIY DeskDavid McCabe2021-05-01 | This is the first video of me attempting the Fix This Build That "DIY Desk with Drawers." The goal is to show how a "newbie" or DIY person can accomplish this build. My video won't give away any plans or measurements for this build but you can easily get those at these links. They are reasonably priced and you will save in the end by having them.
This video won't necessarily be instructional but you may find some help in my methods and I'll point out anything that I discover. You should also expect some mistakes as I'm a beginner.
I have some other woodworking videos on my channel so take a look around. Thanks for watching and let me know what you think or if you have any questions. Big thanks to Brad and the FTBT crew for allowing me to video this build. (I asked first!)Planer Jointer Cart Shop Cabinet Combo - Single Sheet of Plywood - Plans AvailableDavid McCabe2021-04-20 | UPDATE: If you have made a donation via YT please contact me. Use the about tab on my channel or you can use Etsy messenger.
Here is my cart to hold the Dewalt Planer and the Wahuda Jointer. It's an "All in One" solution for milling lumber in the shop. Roll it out to use, and roll it back when you are done! It's done all in a single sheet of 4x8 plywood.
The height was planned so each tool could use my workbench as an extension table.
There is so much room to build in dust collection, power, drawers, tool storage, etc. I'm already thinking about the next video to build it out and trim up the sides and front.
Plans for this cart are available for any donation you would like to make.Wahuda Jointer Setup Process, Infeed Outfeed Coplaner, Alignment Adjustment BenchtopDavid McCabe2021-04-18 | I'll give you some tips and tricks to setup your Wahuda Jointer. This process may also be good for any benchtop jointer with leveling screws on the top of the tables. Wen, Craftsman, Rikon, Cutech, Porter Cable, etc.
UPDATE: Just saw a great comment on the level I was using in the video. I have recently changed to using a straight edge bar as they are more trustworthy in my opinion. Search on Amazon for straight edge bar and you will find one. I have a 24". They are great for laying right on the table and seeing how flat it is. More precise than the level. Also, I have a video here about a cart for the planer and jointer. Make sure you watch that one too!
The planer cart video is coming soon. Please subscribe and check back!
See and buy the Wahuda 8" Jointer on Amazon - amzn.to/3snZrBr (this is an Amazon Affiliate link and I may make a small commission on referral at no cost to you!)
I also recommend you study proper jointer technique. Search those terms to find a few videos. Here is a good one with Katz-Moses youtube.com/watch?v=13FPTSA4pdo
I interchange terms a lot! Cutter Head, blade, heads, etc. Allen key, wrench, head, allen.Wahuda Tools 8 Inch Jointer First LookDavid McCabe2021-04-10 | Taking a look at the Wahuda Jointer. This is the 8" ordered direct from Wahuda Tools. I'll get it out of the box and all put together and show you all the details. That and some chit chat about the jointer.
This is the first video in the series of getting this ordered, setup, and working in the shop. Subscribe so you don't miss the next in the series!
Update: I just dialed in the infeed and out feed tables. Fence is good and square as well. Ran a test piece through and wow! I’m confident enough to proceed with a table top job. Well, 48” x 22” wide hardwood top. Video of the process of leveling will be out soon.Reclaimed Flooring to Table TopDavid McCabe2021-03-29 | Converting reclaimed flooring into table top boards and butterflies.Workbench Dust Collection Fail - It worked on PaperDavid McCabe2021-03-26 | My dust collection plan worked great on paper! I'll give you a rundown of my power system and dust collection system that is completely encased inside of my 6' x 4' workbench. Check the workbench video out here - youtube.com/watch?v=RUcguolFXDQFCJH 8Th Grade Football 2020David McCabe2020-10-15 | FCJH 8Th Grade Football 2020
EOY VideoLake Cumberland Houseboat, New River Vacation 2020David McCabe2020-07-26 | Lake Cumberland Houseboat, New River Vacation 2020
New River Whitewater rafting. We've now done both the lower and upper New River. So fun. We stayed near Hico in a little cabin.
More video coming on the houseboat. I both loved it and hated it.
We then got lost looking for our rental house. The GPS on my Chevy Suburban led us down a road that was for off-roaders. Seriously, we thought it was a dirt road at first. We are now "those" people that followed a GPS route to our doom. It is hard to explain. GPS in the car said 7 minutes this way, phone said 30 minutes another way. We made it down the rough section only to find a creek flowing at about 2 feet. It was either cross it or go back. We went back thankfully. The other side of the creek was even more "Jeeping" rocks. We never would have made that creek anyhow.
Some footage from KentuckyJeeper used. See that full video here and subscribe to that channel. Thanks for letting me use that clip. youtube.com/watch?v=Vyte4KFdFBY&tRESET 71- Home Made Passive Mixer and Rocket Fin JigDavid McCabe2020-04-05 | I've taken on a few projects at home during COVID-19 "Stay at Home." First up is a "Passive" Mixer. Meaning, it needs no power and what comes in must come out! Second, is a model rocket fin jig. This thing helps me glue the fins on the rocket so the thing will hopefully fly straight when it launches.
Audio Version of this podcast at https://reset.fm/71
Let me know if you like the video version of RESET or still prefer audio only. I have a lot to clean up in the video version but have some time on my hands so let me know!Sights and Sounds of Las Vegas and CES 2020David McCabe2020-02-03 | Here is a short one of some sight and sounds around Las Vegas during and after CES 2020. Nothing substantial just a few clips here and there. More, possibly better, video at CES 2020 on my channel.Is Frys Electronics in trouble? Ill compare Indiana to Las Vegas. Inventory?David McCabe2020-01-25 | The Fry's Electronics in Indiana is a wasteland! What does Las Vegas look like? I'll show you both.All of the Drones at CES 2020. Robots, underwater, over land, in the air.David McCabe2020-01-25 | All of the Drones at CES 2020! Robots, underwater, over land, in the air. Walk through of the Drone section.CES 2020 Swag ReviewDavid McCabe2020-01-15 | Some hate this video, others love it. Here is the stuff that I brought home from CES 2020. Swag wasn't the ultimate goal of the show but it always seems to make it into my suitcase. Thanks for watching and subscribe for more CES related and tech stuff in 2020. Also check https://reset.fm for my Trending Tech Podcast called RESET.Mavic Mini: First Look, Flight, and ThoughtsDavid McCabe2019-11-21 | I'm taking a look at the Mavic Mini Fly More Combo. I'll also give it a quick flight. My last drone was the Spark so I'll compare the experience to the DJI Spark. Also, I'll talk about the value of the Fly More Combo. It extends beyond the extra things you receive. I'll explain if you watch to the end.
I previously uploaded the wrong video! I uploaded the unboxing video which was awful. My mistake, here is the nicer one. Already unboxed and ready to discuss!Knights PromoDavid McCabe2019-10-26 | Knights Promo
http://www.leaguelineup.com/welcome.asp?url=iefafootballscoresFishers June 16 2019 FloodingDavid McCabe2019-06-17 | I flew around a few neighborhoods in Fishers, IN to see what the rain water looked like. I figure someone else might want to see as well.Pixel 3 Fabric Case vs. eBayDavid McCabe2019-05-15 | I found this fabric case on ebay and for $7 why not compare it to the Google Fabric Case. Here they both are.
I've installed it in my garage and I'll show you my install and the app screen working.
Listen to RESET Podcast at http://reset.fm for more in depth discussion on the Wyze Sense product. I'll also be testing more in depth with it in the future.Alaska Travel Video via Cruise, Train, Plane with majestic DenaliDavid McCabe2019-04-09 | I put together a few clips from our 2018 vacation to Alaska. This is our 2nd time to travel Alaska. The first trip we never saw Denali so we felt fortunate it was visible this time. Let me know if you have any questions about any of the footage.Osmo Pocket Accessories, Mounts, and CasesDavid McCabe2019-04-06 | I have a few mounts and cases I've collected over the past few months and I'll go over them in depth. Also, I'll let you know which ones I've travelled with and how they worked. I have a favorite out of the bunch and I'll let you guess which one!
Are you using one of these? Which is your favorite? Let me know what you are using too. Comment below!
RCstyle Soft Silicone Protective Case with Lanyard - amzn.to/2CZluHv - $7.99
Multifunctional Expanding 1/4'' Screw Adapter Mount Stand for DJI OSMO Pocket - amzn.to/2G2zliv - $6.29
Original STARTRC Camera Handheld Phone Holder for STARTRC OSMO Pocket - gearbest.com/gimbal/pp_009510163847.html?wid=1433363 - $5.67AutoWit Autobot Air Freshener with HEPA Filter and how to use scent materials with itDavid McCabe2019-03-24 | AutoWit Autobot Air Freshener and how to use scent materials with it.
This is a nice air freshener that freshens the air in your car, home, or office. It has a HEPA filter that can be changed. USB powered.
Leave comments or questions below. I'll list all the steps that I did in the video. It's more towards the end. I may have missed something or did too many steps but what I have been doing has worked!
The box says plug and play but i've never had it be that easy!
2019 Version.Cold Day Flight with the DJI SparkDavid McCabe2019-01-21 | Flying on a cold day with the DJI Spark. 10° F with a wind chill around 0°. So cold that the iPhone 6 Plus that I was using shut down and refused to restart. It was easy to land without it but still not fun! The Pixel 3 XL did fine. I kept the Spark batteries in my pocket to keep them warm. I could only fly 2 batteries due to the cold and my fingers. It started to hurt!
Join the Patreon. $1 gets you a RESET sticker.Drone Section of CES 2019 shot with the DJI Osmo PocketDavid McCabe2019-01-10 | Drone Section of CES 2019 shot with the DJI Osmo PocketCES 2019 Unveiled shot on the DJI Osmo PocketDavid McCabe2019-01-07 | CES 2019 Unveiled shot on the DJI Osmo PocketWhats in my CES 2019 BagDavid McCabe2019-01-07 | What's in my CES 2019 Bag. Also, some sights and sounds from Vegas.Lego Architecture Time Lapse Builds Las Vegas Great Wall and LondonDavid McCabe2018-12-28 | Lego Architecture Time Lapse Builds * 3 Las Vegas, Great Wall of China, and London Skyline, all at the same time.
Lego Las Vegas amzn.to/2Ss8O1Q $31.99 • Measures over 7” (19cm) high, 10” (27cm) wide and 2” (7cm) deep • 487 pieces – LAS Vegas souvenir model for boys and girls over 12 years old
Lego Great Wall of China amzn.to/2BM5IhL $39.99 • This Great Wall of China souvenir measures over 4” (12cm) high, 10” (27cm) wide and 3” (9cm) deep • 551 pieces – Collectible souvenir building for boys and girls aged 12+ and for fans and big kids of all ages
Lego London Skyline amzn.to/2Vha6yd $31.99 • Measures over 5” high, 11” wide and 3” deep • 468 pieces – For boys and girls ages 12 and older
Lego Las Vegas amzn.to/2Ss8O1Q $31.99 • Measures over 7” (19cm) high, 10” (27cm) wide and 2” (7cm) deep • 487 pieces – LAS Vegas souvenir model for boys and girls over 12 years old
Lego Great Wall of China amzn.to/2BM5IhL $39.99 • This Great Wall of China souvenir measures over 4” (12cm) high, 10” (27cm) wide and 3” (9cm) deep • 551 pieces – Collectible souvenir building for boys and girls aged 12+ and for fans and big kids of all ages
Lego London Skyline amzn.to/2Vha6yd $31.99 • Measures over 5” high, 11” wide and 3” deep • 468 pieces – For boys and girls ages 12 and older
Lego Las Vegas amzn.to/2Ss8O1Q $31.99 • Measures over 7” (19cm) high, 10” (27cm) wide and 2” (7cm) deep • 487 pieces – LAS Vegas souvenir model for boys and girls over 12 years old
Lego Great Wall of China amzn.to/2BM5IhL $39.99 • This Great Wall of China souvenir measures over 4” (12cm) high, 10” (27cm) wide and 3” (9cm) deep • 551 pieces – Collectible souvenir building for boys and girls aged 12+ and for fans and big kids of all ages
Lego London Skyline amzn.to/2Vha6yd $31.99 • Measures over 5” high, 11” wide and 3” deep • 468 pieces – For boys and girls ages 12 and older