Rustic Texas Flag - Pallet Wood - Making It Yourself @danthemakerman
Rustic Texas Flag - Pallet Wood - Making It Yourself  @danthemakerman
Uploaded January 2016 | Updated November 2026, 3 hours ago
In this video I make a rustic Texas flag made from mostly pallet wood. This was a commissioned piece the person I was making this for wanted it to look like the flag was ripped off of a wall. While I don’t think I captured that exactly, I do like the end result.

After dismantling, power washing and drying the pallet wood I started to mock up what the different planks would look like. Originally I was thinking about using different widths but in the end it just didn’t look right so I went with planks that were all the same width. They did have varying thicknesses and weathering which added a little dimension to the overall piece. Once I was satisfied with the planks I would be using; I used my grinder and a cutoff wheel to distress the edges of the planks to make them look rotten and weathered. This was a long process and I tried really hard for them to look naturally weathered.

Next I started working on the frame that would hold all the pallet wood planks. I made it out of 2x4s because eventually the flag will be back lit with a strip of LED lights and I needed the depth of the 2x4 to have enough room to fit the transformer for the lights between the flag and the wall where it will hang. I also had to make some extensions for the first and last planks. I did this so that I could recess the 2x4 frame back from the sides and still have something sturdy to attach the first and last planks too. Otherwise I would’ve ended up with lights that were really close to the side edges and not so close for the top and bottom edges. All this had to be taken in to consideration along with the cracked and missing pieces of planks. I didn’t want the frame to be visible from the front. I attached the extensions with wood glue and screws because they would also bear the weight of the flag when hanging it on the wall. I trimmed the extensions to be slightly shorter than the width of the first and last plank. Then I attached all the planks with glue and nails.

The next phase was the painting process. I took one section at a time and masked off the areas and painted them. The one tricky area was the white stripe because I actually use three different colors to attain a varied look. I start with “bright white” then “almond” and lastly “ivory” using these three colors adds a lot of depth to an otherwise white stripe. Lastly I used a template I made of the star to trace on to the blue field and cutout a stencil made of blue tape and then painted it using the same 3 colors as the white stripe.

This project was a bit more challenging than I originally thought as I had to take in to consideration the LED lighting and how that would be affected by the frame. I also needed to consider the routing of the cables, as well as the depth of the frame and a few other minor details. Overall I am very pleased with the finished piece I was very tempted to keep it. I might just have to make one for myself.

I hope you enjoy this video and hopefully this will inspire you to create your own large pallet wood art piece. Think about it this way it doesn’t have to be the flag of Texas. You could use the techniques from this video and create a large pallet wood canvas for a landscape you want to paint or a replica of a logo or a vintage sign or an abstract painting or a use it as a back drop for a photo gallery or…….

A Darker Heart by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Artist: audionautix.com
Rustic Texas Flag - Pallet Wood - Making It Yourself3 Different ways to make a Superman Clock out of WoodTrash to Treasure, Flip Top Tool Stand.Joker Stencil Experiment Mixed MediaForging a Zombie Bowie Spear - Dirty Smith Zombie Weapon Challenge 2017Incredible Hulk Comic Book Corner Art Box #comics #marvel #hulk #lasercuttingHow to Make a Gyuto Style Knife from Pallet WoodCheap Corner Clamp Guide DIYAnti-Gravity Pen Holder.Lathe and Lathe Tools UnboxingDeadpool Pencil Holder 3D Print - from model to finish paintingThunderCats Umbrella | 3D Printed | Ender 3
Daniel Quiroz |

Rustic Texas Flag - Pallet Wood - Making It Yourself

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER