Uploaded May 2026 | Updated September 2026, 3 weeks ago
Run Google's Gemma 4 / 3 AI model locally on your Raspberry Pi 5 or 4 — no internet, no cloud, no subscription! In this beginner tutorial, I'll show you how to set up and run Gemma 4 on Raspberry Pi step by step. 🤖
Try efficient circuit drawing and PCB designing tools by Altium: altium.com/in/yt/rootsaid
Whether you're building a smart robot, a voice assistant, or just want to experiment with AI on a $80 computer — this guide gets you running in minutes.
Complete Tutorial and Code - rootsaid.com/embedded-systems/gemini-ai-in-raspberry-pi
What You'll Learn:
How to install Ollama on Raspberry Pi 5
Download and run Gemma 4 (E2B) locally
Chat with Gemma 4 from your terminal
Connect Gemma 4 to a web interface (Open WebUI)
Speed and performance tips for best results
What You'll Need:
• Raspberry Pi 5 (4GB or 8GB)
• MicroSD Card (32GB+ recommended)
• Power Supply
• Internet connection (only for setup!)
• Optional: NVMe SSD for faster model loading
Timestamps:
00:00 - Introduction: Gemma on Raspberry Pi
00:33 - Which Raspberry Pi Should You Choose?
00:48 - Installing OS in Raspberry Pi
01:29 - Install Ollama on Raspberry Pi
02:10 - What is Gemma?
02:29 - Download Gemma Model
03:15 - Chat with Gemma in Terminal
05:25 - Set Up Open WebUI (Browser Chat)
06:55 - Local AI Assistant using Gemma
This project is perfect for beginners in robotics, AI, and electronics. Once Gemma 4 is running on your Pi, you can use it as the brain for your DIY robot, home automation system, or personal AI assistant — all completely offline and private!
Subscribe for more Raspberry Pi, Arduino & Robotics tutorials every week!
#RaspberryPi #Gemma4 #LocalAI #RaspberryPi5 #Ollama #RunAILocally #Gemma4RaspberryPi #RaspberryPiAI #OfflineAI #DIYRobotics #beginnertutorial
@AtiumOfficial #altiumstories
Run Google's Gemma 4 / 3 AI model locally on your Raspberry Pi 5 or 4 — no internet, no cloud, no subscription! In this beginner tutorial, I'll show you how to set up and run Gemma 4 on Raspberry Pi step by step. 🤖
Try efficient circuit drawing and PCB designing tools by Altium: altium.com/in/yt/rootsaid
Whether you're building a smart robot, a voice assistant, or just want to experiment with AI on a $80 computer — this guide gets you running in minutes.
Complete Tutorial and Code - rootsaid.com/embedded-systems/gemini-ai-in-raspberry-pi
What You'll Learn:
How to install Ollama on Raspberry Pi 5
Download and run Gemma 4 (E2B) locally
Chat with Gemma 4 from your terminal
Connect Gemma 4 to a web interface (Open WebUI)
Speed and performance tips for best results
What You'll Need:
• Raspberry Pi 5 (4GB or 8GB)
• MicroSD Card (32GB+ recommended)
• Power Supply
• Internet connection (only for setup!)
• Optional: NVMe SSD for faster model loading
Timestamps:
00:00 - Introduction: Gemma on Raspberry Pi
00:33 - Which Raspberry Pi Should You Choose?
00:48 - Installing OS in Raspberry Pi
01:29 - Install Ollama on Raspberry Pi
02:10 - What is Gemma?
02:29 - Download Gemma Model
03:15 - Chat with Gemma in Terminal
05:25 - Set Up Open WebUI (Browser Chat)
06:55 - Local AI Assistant using Gemma
This project is perfect for beginners in robotics, AI, and electronics. Once Gemma 4 is running on your Pi, you can use it as the brain for your DIY robot, home automation system, or personal AI assistant — all completely offline and private!
Subscribe for more Raspberry Pi, Arduino & Robotics tutorials every week!
#RaspberryPi #Gemma4 #LocalAI #RaspberryPi5 #Ollama #RunAILocally #Gemma4RaspberryPi #RaspberryPiAI #OfflineAI #DIYRobotics #beginnertutorial
@AtiumOfficial #altiumstories
