Uploaded May 2020 | Updated November 2026, 3 hours ago
Resurrected the old rotary valve Briggs and Stratton engine. The base engine is model N from approximately 1950. The valve is driven at 1/2 crack shaft speed by a timing chain. The intake is fed by a Mikuni carburetor on the one end of the valve, and the exhaust exits through the drive sprocket on the other side of the valve.
The valve timing on this particular valve is very aggressive so it does not like to idle. It is more aggressively timed than the valves in our rotary valve BMW e36.
In order to get the engine running after not running for about 4 years, it needed a new spark plug wire and the old gas cleaned through the carburetor.
Resurrected the old rotary valve Briggs and Stratton engine. The base engine is model N from approximately 1950. The valve is driven at 1/2 crack shaft speed by a timing chain. The intake is fed by a Mikuni carburetor on the one end of the valve, and the exhaust exits through the drive sprocket on the other side of the valve.
The valve timing on this particular valve is very aggressive so it does not like to idle. It is more aggressively timed than the valves in our rotary valve BMW e36.
In order to get the engine running after not running for about 4 years, it needed a new spark plug wire and the old gas cleaned through the carburetor.










