![Robot Lab Builds Worlds Smallest Drone [Maker Update 09] @MakerProjectLab](https://i.ytimg.com/vi/tA2ya0PAspE/maxresdefault.jpg)
Uploaded November 2016 | Updated September 2026, 3 hours ago
This week, an infinity mirror that bends, a single-motor miniature drone, a no-weld go-kart, mechanical iris goggles, and more.
-=SUBSCRIBE ON YOUTUBE=-
youtube.com/c/makerprojectlab?sub_confirmation=1
-=-=SHOW NOTES=-=-=-
Project of the Week
Warping Infinity Mirror
instructables.com/id/Warping-Infinity-Mirror
News
Piccolissimo Smallest Drone
modlabupenn.org/piccolissimo
Projects
Furze No-Weld GoKart
youtube.com/watch?v=vuRV-uXGy1w
LoboCNC Iris Goggles
thingiverse.com/thing:1833286
NeatherBot Remix
thingiverse.com/make:263657
Tools/Tips
Small Alligator Clip to Male Jumper Wire Bundle
adafruit.com/products/3255
Becky Stern's Arduino Class
instructables.com/class/Arduino-Class
Shout Out
Cool Tools
kk.org/cooltools/china-travelmaker-updateanti-boredom
Cool Tools podcast
kk.org/cooltools/category/podcast-2
Recomendo
recomendo.com
Maker Faires
makerfaire.com/map
Cleveland Mini Maker Faire Cleveland, Ohio USA
Rio de Janeiro Mini Maker Faire Rio de Janeiro Brazil
Maker Faire Lille Lille France
Kharkiv Mini Maker Faire Kharkiv Ukraine
Maker Faire Adelaide Adelaide Australia
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: makerprojectlab.com
Facebook: fb.me/makerprojectlab
Instagram: instagram.com/makerprojectlab
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501
This week, an infinity mirror that bends, a single-motor miniature drone, a no-weld go-kart, mechanical iris goggles, and more.
-=SUBSCRIBE ON YOUTUBE=-
youtube.com/c/makerprojectlab?sub_confirmation=1
-=-=SHOW NOTES=-=-=-
Project of the Week
Warping Infinity Mirror
instructables.com/id/Warping-Infinity-Mirror
News
Piccolissimo Smallest Drone
modlabupenn.org/piccolissimo
Projects
Furze No-Weld GoKart
youtube.com/watch?v=vuRV-uXGy1w
LoboCNC Iris Goggles
thingiverse.com/thing:1833286
NeatherBot Remix
thingiverse.com/make:263657
Tools/Tips
Small Alligator Clip to Male Jumper Wire Bundle
adafruit.com/products/3255
Becky Stern's Arduino Class
instructables.com/class/Arduino-Class
Shout Out
Cool Tools
kk.org/cooltools/china-travelmaker-updateanti-boredom
Cool Tools podcast
kk.org/cooltools/category/podcast-2
Recomendo
recomendo.com
Maker Faires
makerfaire.com/map
Cleveland Mini Maker Faire Cleveland, Ohio USA
Rio de Janeiro Mini Maker Faire Rio de Janeiro Brazil
Maker Faire Lille Lille France
Kharkiv Mini Maker Faire Kharkiv Ukraine
Maker Faire Adelaide Adelaide Australia
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: makerprojectlab.com
Facebook: fb.me/makerprojectlab
Instagram: instagram.com/makerprojectlab
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501
![Robot Lab Builds Worlds Smallest Drone [Maker Update 09]](https://i.ytimg.com/vi/tA2ya0PAspE/mqdefault.jpg "Robot Lab Builds Worlds Smallest Drone [Maker Update 09]
This week, an infinity mirror that bends, a single-motor miniature drone, a no-weld go-kart, mechanical iris goggles, and more.
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
SHOW NOTES
Project of the Week
Warping Infinity Mirror
http://www.instructables.com/id/Warping-Infinity-Mirror/
News
Piccolissimo Smallest Drone
http://modlabupenn.org/piccolissimo/
Projects
Furze No-Weld GoKart
https://www.youtube.com/watch?v=vuRV-uXGy1w
LoboCNC Iris Goggles
https://www.thingiverse.com/thing:1833286
NeatherBot Remix
http://www.thingiverse.com/make:263657
Tools/Tips
Small Alligator Clip to Male Jumper Wire Bundle
https://www.adafruit.com/products/3255
Becky Sterns Arduino Class
http://www.instructables.com/class/Arduino-Class/
Shout Out
Cool Tools
http://kk.org/cooltools/china-travelmaker-updateanti-boredom/
Cool Tools podcast
http://kk.org/cooltools/category/podcast-2
Recomendo
http://recomendo.com/
Maker Faires
http://makerfaire.com/map/
Cleveland Mini Maker Faire Cleveland, Ohio USA
Rio de Janeiro Mini Maker Faire Rio de Janeiro Brazil
Maker Faire Lille Lille France
Kharkiv Mini Maker Faire Kharkiv Ukraine
Maker Faire Adelaide Adelaide Australia
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![DIY Spy Camera and IoT Valentines [Maker Update #20]](https://i.ytimg.com/vi/t_ix-hGvaNQ/mqdefault.jpg "DIY Spy Camera and IoT Valentines [Maker Update #20]
This week on Maker Update, a cheap, DIY spy camera, manufacturing with Voodoo, the Billy Bass Alexa gets fully realized, an internet valentine, printed pangolins, a guitar stompbox development rig, friction welding plastic, and Maker Faire Kuwait. SUBSCRIBE ON YOUTUBE https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Project of the Week
Timelapse Mini Arduino Camera (Ruiz Bros) (00:47)
https://learn.adafruit.com/portable-mini-timelapse-camera
Layer by Layer
https://www.youtube.com/watch?v=nk4mgITryCo
News
Voodoo Manufacturing raises 1.4m (2:08)
https://techcrunch.com/2017/01/24/voodoo-manufacturing-raises-1-4-million-to-make-a-factory-full-of-3d-printers/
https://voodoomfg.com/
We Are All Immigrants Keychain (2:59)
https://weareallimmigrants.world/
Projects
Raspberry Pi Billy Bass (Mari DeGrazia) (3:43)
https://anotherpiblog.blogspot.com/2017/01/billy-bass-alexa-and-raspberry-pi.html
https://www.youtube.com/watch?v=TLwf91aQHwI
Internet Valentine (Becky Stern) (4:09)
http://www.instructables.com/id/Internet-Valentine/
Pangolin 3D Print (Amao Chan) (4:55)
https://www.thingiverse.com/thing:2064359
Tools/Tips
MacroFab FX Dev Board (5:20)
https://www.crowdsupply.com/macrofab-inc/fx-development-board
Weld Plastic Using Dremel (5:52)
http://makezine.com/2015/04/30/turn-dremel-tool-plastic-welder/
Maker Faires
http://makerfaire.com/map/
Maker Faire Kuwait, Mushrif (6:20)
http://kuwait.makerfaire.com/
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![Bike-Powered Xbox [Maker Update #44]](https://i.ytimg.com/vi/tbQYnxVY6EM/mqdefault.jpg "Bike-Powered Xbox [Maker Update #44]
This week on Maker Update, converting XP to exercise points, losing WD Labs and Arduino 101, printing butterflies, a $14 super power, and marking your tools. This week’s Cool Tool is wearable magnifying glasses: https://www.amazon.com/exec/obidos/ASIN/B005VIG6TA/ctmakerupdate-20
Show Notes
(expanded notes available here: http://wp.me/p7HjS6-gs)
New show logo!
See more of Todd’s Kurnat’s art and design work:
http://www.toddkurnat.com/
Advanced Project of the Week
Cykill – a Bike Powered Gaming Console by Fuzzy-Wobble
https://www.instructables.com/id/Cykill-a-Bike-Powered-Gaming-Console/
News
WD Labs closing down
http://wdlabs.wd.com/
Arduino 101* discontinuance
https://blog.adafruit.com/2017/07/25/arduino-101-discontinuance-makerbusiness-freearduino-arduinoorg/
More Projects
Butterfly, Animated. by gzumwalt
https://www.instructables.com/id/Butterfly/
Cool Tools Minute
http://cool-tools.org
LED Light Weight Magnifier with 5 Lenses
https://www.amazon.com/exec/obidos/ASIN/B005VIG6TA/ctmakerupdate-20
Review by Gary Klaus (2015)
http://kk.org/cooltools/wearable-magnifying-glasses/
Tools/Tips
List of upcoming Instructables Contests
https://www.instructables.com/community/List-of-Upcoming-Contests/
Make Tip of the Week
http://makezine.com/2017/07/21/tips-of-the-week-cutting-resin-with-microbeads-herringbone-cnc-tape-hiring-a-machine-shop/
Maker Faires
http://makerfaire.com/map/
Institute of Imagination Mini Maker Faire London
Maker Faire Detroit Dearborn, Michigan
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![Pi Panda Cams and Laser Lightsabers [Maker Update #25]](https://i.ytimg.com/vi/tjWhTjykpIo/mqdefault.jpg "Pi Panda Cams and Laser Lightsabers [Maker Update #25]
This week on Maker Update. A laser-powered lightsaber, a new 3D printer feature, rock music with actual rocks, Pi panda cam, high-tech ro-sham-bo, and why I’m building a Hello Kitty car. SUBSCRIBE ON YOUTUBE https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Show Notes
Blog version: http://makerprojectlab.com/pi-panda-cams-and-laser-lightsabers-maker-update-25/
Project of the Week
Laser-powered Lightsaber by makendo
https://www.instructables.com/id/Laser-powered-Light-Saber/
News
Prusa/Slicr variable layer height
http://www.prusaprinters.org/smooth-variable-layer-height-awesome-supports-slic3r-prusa-edition/
More Projects
Mechanical Xylophone by neilmendoza
https://www.instructables.com/id/Mechanical-Xylophone/
http://www.neilmendoza.com/
Pi Panda Cam
https://github.com/Zipcar/zipcar-pi-zero-guide/blob/master/projects/panda-cam-monitor.md
Tools/Tips
Sparkfun Roshamglo board
https://www.sparkfun.com/products/14130
https://twitter.com/Hacksterio/status/841030029836484609
GoKart Crowdfunding
https://www.indiegogo.com/projects/kitty-grabs-back-electric-gokart-racing/x/16196059#/
Contests Ending Soon
Build a Tool
https://www.instructables.com/contest/bat2017/
Sensors
https://www.instructables.com/contest/sensors2017/
Papercraft
https://www.instructables.com/contest/papercraft2017/
Events
Maker Faires
http://makerfaire.com/map/
Grenoble France
Reston, Virginia USA
Dillingen-Saar Germany
Hackaday Unconference in SF, LA & Chicago
http://hackaday.com/2017/03/13/hackaday-unconference-this-saturday-in-triplicate/
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![Let Me Give You a Raspberry Pi [Maker Update #13]](https://i.ytimg.com/vi/tztCpD4utXU/mqdefault.jpg "Let Me Give You a Raspberry Pi [Maker Update #13]
This week on Maker Update: making your own 3D printed computer museum, Fusion 360 learns a new trick, a smoking laser sword, a new drawbot, a reason to buy a dental vacuform, and a giveaway for a full Raspberry Pi computer setup from our show sponsor, WD Labs.
SUBSCRIBE ON YOUTUBE: https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Project of the Week
Build a Mini Commodore PET
https://learn.adafruit.com/mini-commodore-pet-with-charlieplexed-led-matrix
3DP Tiny Computers
https://www.thingiverse.com/glitchpudding/collections/tiny-computers
News
Autodesk Blends Eagle and F360
https://blog.adafruit.com/2016/12/01/integrated-cadsofttech-is-coming-to-adskfusion360-au2016/
Projects
Autodesk P9 AiR Showcase
Black Hole Table
http://www.instructables.com/id/Black-Hole-Table/
Periodic Table Lamp
http://www.instructables.com/id/3D-Periodic-Table/
Solar analemma chandelier
http://www.instructables.com/id/Solar-Analemma-Chandelier/
https://www.youtube.com/watch?v=QwAmJNFJdIw
Tools/Tips
AxiDraw V3
http://www.evilmadscientist.com/2016/axidraw-v3/
Adafruit Time of Flight Boards
https://www.adafruit.com/products/3316
https://www.adafruit.com/products/3317
Dental Vacuform for Breadboards
https://itp.nyu.edu/fab/vacuum-formed-project-enclosure/
https://www.instagram.com/p/BNfLktEjaKC/
http://amzn.to/2g0MnS9
MP4Museum is a Readymade Pi Image for Looping Videos in Galleries & Museums
https://blog.adafruit.com/2016/12/02/mp4museum-is-a-readymade-pi-image-for-looping-videos-in-galleries-museums-piday-raspberrypi/
http://mp4museum.org/
Sponsored Products
WD PIDRIVE NODE ZERO
https://www.wdc.com/products/wdlabs/wd-pidrive-node-zero.html#WDLB033RNN
WD SMART CABLE MODULE
https://www.wdc.com/products/wdlabs/wd-smart-cable-module.html#WDLB031RNN
WD PIDRIVE COMPUTE CENTRE
https://www.wdc.com/products/wdlabs/wd-picompute-centre.html#WDLB032RNN
More on Pi Project Spaces
http://wdlabs.wd.com/global/docs/wd-pidrive-foundation-edition-project-spaces.pdf
http://lifehacker.com/the-pidrive-foundation-edition-is-an-external-hard-driv-1789145353
WD Labs Contest! Win a WD PIDRIVE COMPUTE CENTRE
Winner will be picked next week 12/14/2016. To enter, pitch donald@makerprojectlab.com with your Raspberry Pi project ideas and why youre interested in making them.
Maker Faires
http://makerfaire.com/map/
December 10 + 11, 2016 Bogotá Mini Maker Faire Columbia
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![Laser Cut Mini Boat [Maker Update]](https://i.ytimg.com/vi/uxYNvsErmYA/mqdefault.jpg "Laser Cut Mini Boat [Maker Update]
This week, an electric micro boat, an M&M sorting robot, Tinkercad 3.9, measuring with your saw, and the Raspberry Jam Big Birthday Weekend. This week’s Cool tool is the Makita Impact Gold Ultra-Magnetic Bit Holder: https://www.amazon.com/exec/obidos/ASIN/B00ECMC1F4/ctmakerupdate-20
Buy me a coffee!
https://buymeacoff.ee/Gtn3PD5
Get Maker Update weekly emails (w/bonus links!)
http://eepurl.com/cCJF21
++Show Notes [Maker Update #70]++
[Expanded show notes here: https://wp.me/p7HjS6-pF]
Advanced Project
Mini Boat by Josh Tulberg
https://www.instructables.com/id/Mini-Boat/
http://rapidwhale.com/mini-boat.php
Inspired by 8-Foot Little Miss Sally by Paul Elkins
https://smallboatsmonthly.com/article/little-miss-sally/
More Projects
M&M Sorter by Karl Lautman
https://hackaday.io/project/34279-el-jefe-de-mms
Cool Tools Minute
http://cool-tools.org
Makita B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit
Holder https://www.amazon.com/exec/obidos/ASIN/B00ECMC1F4/ctmakerupdate-20
Dewalt Right Angle Attachment
https://www.amazon.com/exec/obidos/ASIN/B00C0VSNKQ/ctmakerupdate-20
Tools/Tips
Tinkercad 3.9 (1/30/18 release)
https://www.tinkercad.com/#/?type=circuits&collection=designs
T-Pin Probes, Shop Fans, Clamping with Glue, and Using Digital Calipers by Gareth Branwyn
https://makezine.com/2018/02/02/tips-of-the-week-21/
4 Carpentry Tips Every Beginner Should Know by See Jane Drill
https://www.youtube.com/watch?v=IMZI5-P8TWQ
Maker Faires
Maker Faire Lille
Hattiesburg Mini Maker Faire
Raspberry Jam Big Birthday Weekend (March 3-4)
https://www.raspberrypi.org/jam/big-birthday-weekend/
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![Vaccination [alt.ctrl.gdc 2018]](https://i.ytimg.com/vi/vusNUvvzbJ4/mqdefault.jpg "Vaccination [alt.ctrl.gdc 2018]
At the Alt.Ctrl Showcase at GDC 2018, Katy Marshall talks to Maker Project Lab about the asynchronous co-op game, Vaccination.
Installation Required (her game design studio with Alex Johansson) describes the game: Two players must work together to keep the patient alive for as long as possible against the onslaught of bacteria racing towards the patient’s heart. One player is in charge of scanning the body, on the lookout for the bacteria and relaying what vaccine and where the other player, equipped with the injector, should administer.
You can learn more about the game at: https://installreq.itch.io/vaccination
★Buy me a coffee★
https://buymeacoff.ee/Gtn3PD5
(p.s. You’re awesome!)
Get Maker Update weekly emails (w/bonus links!)
http://eepurl.com/cCJF21
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/")
![Dumbo ShotBot [Maker Update #55]](https://i.ytimg.com/vi/w3_0ms6roH0/mqdefault.jpg "Dumbo ShotBot [Maker Update #55]
This week on Maker Update, a shot-pouring elephant, Arduino and ARM, 3d printed linear motion, and Too $hort cat. This week’s Cool Tool is Long Nose 4-inch Vise Grip Pliers https://www.amazon.com/exec/obidos/ASIN/B0000BYD9A/ctmakerupdate-20.
++Show Notes++
Project of the Week
Drunky Dumbo by robotgeek_official
https://www.instructables.com/id/Drunky-Dumbo/
News
Arduino Partners with ARM
https://blog.arduino.cc/2017/10/05/arduino-announces-arm-partnership/
Who Owns Arduino (via Hackaday)
https://hackaday.com/2017/10/05/who-owns-arduino/
More Projects
3D Printed Linear Motion by JON-A-TRON
https://www.instructables.com/id/3D-Printed-Linear-Motion/
Too $hort Cat
https://www.instructables.com/id/Too-hort-Cat/
Cool Tools Minute
http://cool-tools.org
Long Nose 4-inch Vise Grip Pliers
https://www.amazon.com/exec/obidos/ASIN/B0000BYD9A/ctmakerupdate-20
Jamie Windhams review
http://kk.org/cooltools/long-nose-vise-grips/
Tools/Tips
Cool Maker-Made Helping Hands by Jotham McMillan
http://www.raptorloc.com/
3 Beginner Arduino Mistakes by bekathwia
https://www.instructables.com/id/3-Beginner-Arduino-Mistakes/
Updated Gemma Guides for Circuit Python
https://blog.adafruit.com/2017/10/09/more-gemma-circuitpython-guides/
Maker Faires
Maker Faire Pittsburgh Pittsburgh, Pennsylvania
Espoo Mini Maker Faire Espoo
Charlotte Mini Maker Faire Charlotte, North Carolina
Rocklin Mini Maker Faire Rocklin, California
Greater Lafayette Mini Maker Faire Lafayette, Indiana
Asuncion Mini Maker Faire Asuncion
Aarhus Mini Maker Faire Aarhus
Penang Mini Maker Faire George Town, Pulau Pinang
Maker Faire Denver Denver, Colorado
Mayersche Mini Maker Faire Aachen
East Bay Mini Maker Faire (Oct. 22nd) http://eastbay.makerfaire.com/
Get Maker Update weekly emails (w/bonus links!)
http://eepurl.com/cCJF21
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![The Talking Tiki [Maker Update #50]](https://i.ytimg.com/vi/wMuZE_S0c1Y/mqdefault.jpg "The Talking Tiki [Maker Update #50]
This week, an enchanted talking tiki totem pole, my trip to OSH Park and Metrix Makerspace, and a retro lightbox. This week’s Cool Tool is the Hakko CHP-170 Flush Cutter https://www.amazon.com/exec/obidos/ASIN/B017ODDPNO/ctmakerupdate-20.
++SHOW NOTES++
[Extended show notes here: https://wp.me/p7HjS6-hR]
Advanced Project
Talking Tiki by JimScuba2386
https://twitter.com/hashtag/talkingtiki?src=hash
News
OSH Park
https://oshpark.com/
Metrix
http://www.metrixcreatespace.com/
More Projects
Customizable Retro Lightbox by mightynozzle
https://www.thingiverse.com/thing:2498966
Cool Tools Minute
http://cool-tools.org
Hakko CHP-170 Flush Cutters
https://www.amazon.com/exec/obidos/ASIN/B017ODDPNO/ctmakerupdate-20
Tips
Diresta Tips: Road Case, Makerspace Table, 3DP Movable Type
https://www.youtube.com/watch?v=N3RzuMzmi-8
Maker Faires
Chattanooga Mini Maker Faire Chattanooga, Tennessee
Midcoast Mini Maker Faire Camden, Maine
Maker Faire Moscow Moscow
Zurich Mini Maker Faire Zurich
Odesa Mini Maker Faire Odesa
Linz Mini Maker Faire (Ars Electronica) Linz
Get Maker Update weekly emails (w/bonus links!)
http://eepurl.com/cCJF21
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
![Goliath Router Robot [Maker Update #52]](https://i.ytimg.com/vi/xHqkcpvpQG8/mqdefault.jpg "Goliath Router Robot [Maker Update #52]
This week on Maker Update, a giant AT-AT made from foam board, the Goliath CNC robot, embossing your notebook, affordable addressable LED strip, a software update for your knitting machine, and World Maker Faire. This week’s Cool Tool is WS2812b LED strip https://www.amazon.com/exec/obidos/ASIN/B00ZHB9M6A/ctmakerupdate-20
++SHOW NOTES++
[Get expanded show notes here: https://wp.me/p7HjS6-iq]
Advanced Project
Large-Scale Star Wars AT-AT Walker Build by kylegilbert
https://www.instructables.com/id/Large-Scale-Star-Wars-AT-AT-Walker-Build/
Design Template based on Wooden AT-AT Walker by seamster
https://www.instructables.com/id/Wooden-AT-AT-Walker/
News
Goliath CNC Router Robot Announced
https://comingsoon-tech.com/goliath-autonomous-cnc-machine
More Projects
Easy Embossed Moleskine by mikeasaurus
https://www.instructables.com/id/Easy-Embossed-Moleskine/
Cool Tools Minute
http://cool-tools.org
Generic Arduino/Pi-Compatible Addressable LED Strip (ws2812b)
https://www.amazon.com/exec/obidos/ASIN/B00ZHB9M6A/ctmakerupdate-20
Tools/Tips
Level Shifting 3.3V microcontrollers and NeoPixels by John Park
https://learn.adafruit.com/neopixel-levelshifter/shifting-levels
A NOOB’S GUIDE TO MCMASTER-CARR by Joshua Vasquez
https://hackaday.com/2017/09/13/noobs-guide-to-mcmaster-carr/
AYAB v0.90 is here! By Lenore Edman
http://www.evilmadscientist.com/2017/ayab-v0-90-is-here/
http://ayab-knitting.com/
Maker Faires
http://makerfaire.com/map/
WORLD MAKER FAIRE NEW YORK Queens, New York
Maker Faire Milwaukee Milwaukee
Aggieville Mini Maker Faire Manhattan, Kansas
Rogue Valley Mini Maker Faire Ashland, Oregon
Champlain Mini Maker Faire Shelburne Farms, Vermont
Raleigh Mini Maker Faire Raleigh, North Carolina
Mayersche Mini Maker Faire Dortmund
Thalia Mini Maker Faire Nürnberg
Youve Got My Eyes show in San Francisco 9/30
http://krawczukindustries.com/youvegotmyeyes/
Get Maker Update weekly emails (w/bonus links!)
http://eepurl.com/cCJF21
SUBSCRIBE ON YOUTUBE
https://www.youtube.com/c/makerprojectlab?sub_confirmation=1
Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/
Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501")
