Uploaded May 2025 | Updated September 2026, 2 weeks ago
In this video of Robotics Tutorial for beginners video series, we will be taking a look at actuators and motors used in Robotics! Ever wondered how robots actually move?
We’ll break down one of the most important components in any robot — the actuator. From wheels that spin to robotic arms that lift and rotate, actuators are the key to bringing your robot to life.
Altium365 and PCB Designer Trial - altium.com/yt/RootSaidRoboticsElectronicsTechnologyEnglish
We’ll explore different types of actuators used in robotics — including DC motors, servo motors, stepper motors, brushless motors, and even pneumatic and hydraulic systems.
@AtiumOfficial #altiumstories #arduino #robotics
In this video of Robotics Tutorial for beginners video series, we will be taking a look at actuators and motors used in Robotics! Ever wondered how robots actually move?
We’ll break down one of the most important components in any robot — the actuator. From wheels that spin to robotic arms that lift and rotate, actuators are the key to bringing your robot to life.
Altium365 and PCB Designer Trial - altium.com/yt/RootSaidRoboticsElectronicsTechnologyEnglish
We’ll explore different types of actuators used in robotics — including DC motors, servo motors, stepper motors, brushless motors, and even pneumatic and hydraulic systems.
@AtiumOfficial #altiumstories #arduino #robotics
![Make a Clone of you IR Remote! How to make Infrared Remote Controller using Arduino [Step by Step]](https://i.ytimg.com/vi/SaljK44_4B0/mqdefault.jpg "Make a Clone of you IR Remote! How to make Infrared Remote Controller using Arduino [Step by Step]
DIY IR Remote Controller using Arduino - In this video, we will create an Arduino IR Remote Control within 5 minutes. Who doesnt like to play around with Arduino? Lets build something useful.
Its cool to make your own PCBs for your DIY Project right? Its Super Easy!
Altium365 and PCB Designer FREE Trial - https://www.altium365.com/yt/rootsaid
FREE PCB Designing Course Altium Student Lab: https://www.altium.com/in/yt/rootsaidroboticselectronicsandtechnology
When you purchase an item like a television or an air conditioner that can be controlled remotely, you will often only receive one remote control with your purchase, right? What about making a duplicate of an infrared remote controller? In this video, I will demonstrate how you can use Arduino to replicate an infrared (IR) remote control by showing you how to make your own.
I will walk you through the entire process of making your very own Arduino IR Remote Controller, from walking you through the circuit to walking you through the programming.
How exactly does an infrared (IR) remote control work?
The signals that are sent from an IR remote, also known as a transmitter, are transmitted to the device that they control through the use of infrared light. It does it by sending out bursts of virtually undetectable infrared light, which correlate to particular binary codes.
These codes reflect commands, such as turning the power on, increasing the volume, or decreasing the channel. The controlled device, which is also known as the receiver, is responsible for converting the infrared light pulses into a binary code that the devices internal CPU can comprehend. The microprocessor will begin carrying out the orders as soon as the signal has been decoded.
Objective
Therefore, in order to construct a clone of a remote controller, the first thing we need to do is find out what is being communicated by the remote when you press a specific button on the remote controller. This will allow us to create a clone of the remote controller. Second, with the help of our apparatus, we will need to press a button in order to re-execute the code.
In order for this to be possible, we are going to construct a simple circuit, read the information from the actual remote controller, and then replay the signals to the device.
Get Complete Codes and Instructions - https://rootsaid.com/ir-remote-arduino-hack/")
