RIVSET® self-pierce rivets - setting process @BoellhoffGroup
RIVSET® self-pierce rivets - setting process  @BoellhoffGroup
Uploaded April 2016 | Updated November 2026, 1 hour ago
RIVSET® self-pierce riveting is a mechanical joining process. It makes mechanically strong joints of similar or combined material types. Even joints with more than two layers are possible.

Using a semi-tubular rivet, the material layers are joined in a single low-noise operation, without pre-drilling and emissions, producing an interlocked friction joint. The rivet pierces the upper layers of the material and spreads under the influence of a die. Since the lower layer is not pierced, the resulting joint is localised and impervious to gas and liquid.
RIVSET® self-pierce rivets - setting processRIVKLE® NEO B109 – UnboxingRIVKLE® blind rivet nut and stud, an high-performance assembly technology (French)RIVKLE® NEO 109 & NEOSOFT – Installation stepsRIVKLE® NEO P107 – Anvil adjustment for RIVKLE® blind rivet studsRIVKLE® Auto Seal Inspect – Automated option integrated in RIVKLE® automation setting headsTechnische Ausbildung bei Böllhoff im DetailRIVKLE® Automation E – Efficient and reliable electric setting system for blind rivet nuts and studsRIVKLE® NEO B107 – Error managementRIVQUICK® Varibolt Plus – multigrip high-strength rivets with locking functionWie viele HELICOIL® sind im Airbus A 380?RIVKLE® blind rivet studs – An alternative to welded and self-clinching nuts
Böllhoff Group |

RIVSET® self-pierce rivets - setting process

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER