RIVKLE® SFC (Smart for Composites) - The blind rivet nut especially for composite materials @BoellhoffGroup
RIVKLE® SFC (Smart for Composites) - The blind rivet nut especially for composite materials  @BoellhoffGroup
Uploaded April 2021 | Updated November 2026, 2 hours ago
RIVKLE® SFC is the blind rivet nut especially designed for composite materials.

The advantages:
- No delamination (due to fastener) - Reduced cracking around weld line
- Hole can be positioned closer to edge of component
- Allows greater hole tolerances
- Axial tolerance compensation of thread position

RIVKLE® SFC is compatible with the entire range of Böllhoff RIVKLE® tools.
RIVKLE® SFC (Smart for Composites) - The blind rivet nut especially for composite materialsElectric installation tool E-S 410 with installation mandrel for HELICOIL® thread insertsRIVKLE® NEO B107 and B109 – Mandrel replacement for RIVKLE® blind rivet nutsRIVCLINCH® 0404IP from 01.01.2014 – Rear air cylinder cleaning and greasingRIVKLE® NEO P107 – Anvil adjustment for open end RIVKLE® blind rivet nutsThe clinching machine (RIVCLINCH® 0404 IP V3) to assemble metal sheets in a record timeRIVKLE® Powertools – How to install and use the extension kitU-NUT® Muttern sichern Schraubverbindungen, selbst bei hohen VibrationenRIVKLE® Seal Ring – Integrated sealing solution for simple and reliable settingHELICOIL® Thread repair for large dimensions - M 30Pneumatic installation tool type P‑PSG with prewinderRIVKLE® NEO B107 – HMI description – Error management
Böllhoff Group |

RIVKLE® SFC (Smart for Composites) - The blind rivet nut especially for composite materials

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER