Risk Calculation - Surge Protection Part 6 @jwflame
Risk Calculation - Surge Protection Part 6  @jwflame
Uploaded March 2020 | Updated November 2026, 13 hours ago
How to obtain the Calculated Risk Level (CRL) for an installation using the methods shown in BS7671:2018. This is used in a few instances to determine whether surge protection is required or not.

A value is derived from three things - whether the installation is urban/rural, the lightning flash density for the location, and the length & type of cables that supply the installation, such as underground or overhead.

Note that this calculation is only required if multiple other factors have already been considered and do not apply - in reality this calculation is only required for a tiny minority of installations.

If cable lengths are unknown, default values can be used, and for most of the UK, using those values results in surge protection being required.

ECA online calculator: eca.co.uk/spd

► Support this channel:
Patreon: patreon.com/jwflame
PayPal Donations: xo4.uk/?PPP

► Social Media:
Twitter: twitter.com/jwflame
Facebook: facebook.com/jwflame
Instagram: instagram.com/jwflame

► Contact info, sending stuff in: etc.:
xo4.uk/?YTT

► Website - More on this video and many other subjects
Website: flameport.com
Risk Calculation - Surge Protection Part 6Y Plan Heating with Unvented Hot Water CylinderEarth Electrodes Part 1Chinese Wire ConnectorsPower Saving Capacitor Box - Extreme TeardownPlastic Socket Key to Defeat Safety Shutters in UK Socket OutletsHot Plug IndicatorsBS7671 18th Edition Amendment 1 Corrigendum May 2020Dimmer Power Factor and Variac DimmingGrid Switches and other modular devicesSwitched 13a Plug BS13631960s Dominion Electric Fuse Panel from Canada
John Ward (jwflame) |

Risk Calculation - Surge Protection Part 6

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER