Uploaded February 2024 | Updated November 2026, 10 hours ago
This lil guy is going to be appearing in one of my upcoming animated CAS shorts, so I decided to record a little bit of the rigging process. Figured I'd make a video on how I rig a simple tail in Toon Boom Harmony Premium! The written instructions/explanation are below:
1. Draw your tail! I drew mine straight so it's more flexible.
2. Add your deformation points using an envelope deformer, and test out the movement to make sure it looks how you want it
3. Once you've decided you like it, make a new drawing layer, attach it to a peg, and then plug the deformation node into that peg. The peg is important so you can specifically select the upper part of the tail when you're animating it
4. Split your tail into two pieces (I usually cut it at the half or 3/4 point) and put the upper part on the new drawing layer. Fill in the gaps if there are any! (I know there's a way to do it without there being gaps in the first place lol, but I usually can't be bothered)
.....Aaandddd you're done!
That's how I rig a veryyy simple tail! Depending on the character's tail shape, you might want a bit more. For example, this tail has those three pieces of fluff at the end of it, and I want some flexibility on those. What I did was draw new tail shapes, one where the tip is facing the other way and one that's an in between of those two drawings. So now I can easily change where the fluff is facing, which makes it not look quite as stiff. You can add as many drawings as you'd like, just make sure they connect perfectly to the tail like what's shown in the video. There's also a way to rig it so you can add deformers to the tail tip, but then it wouldn't be a simple tail anymore haha
Hope this is helpful! If you liked the video I'd appreciate a like or a follow!
This lil guy is going to be appearing in one of my upcoming animated CAS shorts, so I decided to record a little bit of the rigging process. Figured I'd make a video on how I rig a simple tail in Toon Boom Harmony Premium! The written instructions/explanation are below:
1. Draw your tail! I drew mine straight so it's more flexible.
2. Add your deformation points using an envelope deformer, and test out the movement to make sure it looks how you want it
3. Once you've decided you like it, make a new drawing layer, attach it to a peg, and then plug the deformation node into that peg. The peg is important so you can specifically select the upper part of the tail when you're animating it
4. Split your tail into two pieces (I usually cut it at the half or 3/4 point) and put the upper part on the new drawing layer. Fill in the gaps if there are any! (I know there's a way to do it without there being gaps in the first place lol, but I usually can't be bothered)
.....Aaandddd you're done!
That's how I rig a veryyy simple tail! Depending on the character's tail shape, you might want a bit more. For example, this tail has those three pieces of fluff at the end of it, and I want some flexibility on those. What I did was draw new tail shapes, one where the tip is facing the other way and one that's an in between of those two drawings. So now I can easily change where the fluff is facing, which makes it not look quite as stiff. You can add as many drawings as you'd like, just make sure they connect perfectly to the tail like what's shown in the video. There's also a way to rig it so you can add deformers to the tail tip, but then it wouldn't be a simple tail anymore haha
Hope this is helpful! If you liked the video I'd appreciate a like or a follow!










