Uploaded September 2017 | Updated November 2026, 1 day ago
And here you can see how we can turn on and off a light bulb from two or more locations , without wires youtu.be/TLOlhXY5dlk
See my blog diy-tipstricks.blogspot.com/2018/12/review-stihl-ms-181-chainsaw-start-up.html
In this video i will show you the STIHL MS 181 Chainsaw, how to assemble, how to put the chain, how the chain stretchesand all stages for cold start to a chainsaw
The correct starting steps
Bring the control shaft to shock/ cold start. to do this, first engage the throttle lever lock and the throttle lever and then fully push the control shaft
Pull the starter handle firmly several times until the engine starts briefly
The engine starts briefly, then stops again. Now open the shock by moving the control shaft one step up ( in the medium acceleration position)
Press the accelerator lever briefly with your index finger. the control shaft will jump to the idle position.
Thank you for Watching . And do not forget, Like and Subscribe
LED Floodlight with LED COB Chip No Need Driver youtu.be/K7VINKvInyQ
Due to factors beyond the control of DIY Tips&Tricks, it can not guarantee against unauthorized modifications of this information or improper use of this information. DIY Tips&Tricks assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. DIY Tips&Tricks recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of DIY Tips&Tricks, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not DIY Tips&Tricks.
► Music provided by: No Copyright Songs - Best Of
► Electro - Light - Symbolism [NCS Best Of]fear: youtu.be/oInuyv0hhOo
And here you can see how we can turn on and off a light bulb from two or more locations , without wires youtu.be/TLOlhXY5dlk
See my blog diy-tipstricks.blogspot.com/2018/12/review-stihl-ms-181-chainsaw-start-up.html
In this video i will show you the STIHL MS 181 Chainsaw, how to assemble, how to put the chain, how the chain stretchesand all stages for cold start to a chainsaw
The correct starting steps
Bring the control shaft to shock/ cold start. to do this, first engage the throttle lever lock and the throttle lever and then fully push the control shaft
Pull the starter handle firmly several times until the engine starts briefly
The engine starts briefly, then stops again. Now open the shock by moving the control shaft one step up ( in the medium acceleration position)
Press the accelerator lever briefly with your index finger. the control shaft will jump to the idle position.
Thank you for Watching . And do not forget, Like and Subscribe
LED Floodlight with LED COB Chip No Need Driver youtu.be/K7VINKvInyQ
Due to factors beyond the control of DIY Tips&Tricks, it can not guarantee against unauthorized modifications of this information or improper use of this information. DIY Tips&Tricks assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. DIY Tips&Tricks recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of DIY Tips&Tricks, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not DIY Tips&Tricks.
► Music provided by: No Copyright Songs - Best Of
► Electro - Light - Symbolism [NCS Best Of]fear: youtu.be/oInuyv0hhOo










