Uploaded May 2025 | Updated November 2026, 4 days ago
Join this channel to get access to perks:
youtube.com/channel/UC0Dn3A3p02pyT0owaYVwZRg/join
A wonkie little flip clock.
The Ken-Tech T-405 and T-405A.
Like most Ken-Techs these days the digits will be all askew.
This is because the tile hold-backs have broken.
I'll show you how I fix that.
The Ken-Tech T-405 was a latecomer to the game as far as flip clocks go showing up in advertisements in 1977 and persisting until around 1983.
There are two differences between the T-405 and T-405A.
Here, in the original T-405, you see the clock mechanism is secured to the base by two screws.
The T-405A instead uses two nubs or short posts inside the clock to position the clock.
In the T-405 the front piece or bezel, is two-toned, which is just a paint job.
The T-405A is painted only one color.
To fix the tile position I use the ends of black zip ties. They fit perfectly the width allows for good adherence of the glue.
As you can hear and see, when the time is advanced, the clock is a clunky and loud flipper.
However, during time advancement the sound is light.
Barely audible when the clock is assembled.
Even though a later flip clock, old school technology is used for the alarm. Just a horrible buzz, but you will wake up.
Overall, not a bad little vintage flip clock for the price, but you will have to fix it up a bit if you want to be able to use it for time keeping.
The Ken-Tech T-405 and T-405A
Advertisements pictured in this video:
1.
newspapers.com/article/poughkeepsie-journal-ken-tech-model-t-40/167578527
2.
newspapers.com/article/el-paso-herald-post-ken-tech-in-1983-n/172406875
Join this channel to get access to perks:
youtube.com/channel/UC0Dn3A3p02pyT0owaYVwZRg/join
A wonkie little flip clock.
The Ken-Tech T-405 and T-405A.
Like most Ken-Techs these days the digits will be all askew.
This is because the tile hold-backs have broken.
I'll show you how I fix that.
The Ken-Tech T-405 was a latecomer to the game as far as flip clocks go showing up in advertisements in 1977 and persisting until around 1983.
There are two differences between the T-405 and T-405A.
Here, in the original T-405, you see the clock mechanism is secured to the base by two screws.
The T-405A instead uses two nubs or short posts inside the clock to position the clock.
In the T-405 the front piece or bezel, is two-toned, which is just a paint job.
The T-405A is painted only one color.
To fix the tile position I use the ends of black zip ties. They fit perfectly the width allows for good adherence of the glue.
As you can hear and see, when the time is advanced, the clock is a clunky and loud flipper.
However, during time advancement the sound is light.
Barely audible when the clock is assembled.
Even though a later flip clock, old school technology is used for the alarm. Just a horrible buzz, but you will wake up.
Overall, not a bad little vintage flip clock for the price, but you will have to fix it up a bit if you want to be able to use it for time keeping.
The Ken-Tech T-405 and T-405A
Advertisements pictured in this video:
1.
newspapers.com/article/poughkeepsie-journal-ken-tech-model-t-40/167578527
2.
newspapers.com/article/el-paso-herald-post-ken-tech-in-1983-n/172406875










