Uploaded June 2011 | Updated September 2026, 59 minutes ago
***READ ME***
LaRue INDEXCLIP Information:
Quickly find where your optics need to re-attach.
These handy low-profile clips were designed to be attached on the rail, against optics, lasers and other MIL-STD-1913 mounted accessories, providing a quick-index to return to the same point...especially in the dark. Each set comes complete with 72 total clips, 60 regular and 12, designed to hold tapeswitch wires along the rail's edge. LaRue IndexClips are easy to install, and stay-put until pried off (a Dillo's foot works really well for this). Several clips in a row can be used to protect a length of rail, and feature a non-slip surface.
Specifications:
- Glass-reinforced polymer
- Low profile
- 60 Regular clips
- 4 Lower Hooks (for tapeswitch wires)
- 8 Top Keepers (to secure tapeswitch wires into Lower Hooks)
- Enough pieces to cover a carbine's, railed-handguard if desired
Colors: Black, UDE, OD Green, Foliage Green, Flat Dark Earth and RED
Made in USA
For more information or purchasing see:
stores.homestead.com/Laruetactical/Detail.bok?no=386
LaRue HandStop Information:
Improved control for those who prefer a grip on the handguard.
LaRue introduced these slide-on HandStops in the Fall of 2008, and have been refining them ever since. They ended up with a simple, robust and economical solution. The one-piece design has no moving parts to break, or seams to rub against. Once installed in position (they fit snugly anywhere on the rail), these devices add structure optimally to the hand, providing better support, recoil management and overall control of the rifle. Giving the rail physical obstructions also keep the support-hand intuitively in proper position, and away from dangerous SBR muzzles and hot barrels.
Note: Installation requires locking in-position with at least two IndexClips (one on either side), or other rail covers that lock in place. Some modification to rail covers may be needed, if you do not use IndexClips.
Specifications:
- Glass-reinforced polymer
- Ergonomically profiled-
- Textured Saddle
- Fits snug on any MIL-STD 1913, held firmly in-place by IndexClips (not supplied)
- Two HandStops supplied for a variety of configurations
Made in USA
Color: Black, UDE
For more information or purchasing see:
stores.homestead.com/Laruetactical/Detail.bok?no=465
MUSIC NOTE:
licensed under Creative Commons: By Attribution 3.0
Song "what you want" played during the credits was written and owned by: kevin macleod of incompetech.com
***READ ME***
LaRue INDEXCLIP Information:
Quickly find where your optics need to re-attach.
These handy low-profile clips were designed to be attached on the rail, against optics, lasers and other MIL-STD-1913 mounted accessories, providing a quick-index to return to the same point...especially in the dark. Each set comes complete with 72 total clips, 60 regular and 12, designed to hold tapeswitch wires along the rail's edge. LaRue IndexClips are easy to install, and stay-put until pried off (a Dillo's foot works really well for this). Several clips in a row can be used to protect a length of rail, and feature a non-slip surface.
Specifications:
- Glass-reinforced polymer
- Low profile
- 60 Regular clips
- 4 Lower Hooks (for tapeswitch wires)
- 8 Top Keepers (to secure tapeswitch wires into Lower Hooks)
- Enough pieces to cover a carbine's, railed-handguard if desired
Colors: Black, UDE, OD Green, Foliage Green, Flat Dark Earth and RED
Made in USA
For more information or purchasing see:
stores.homestead.com/Laruetactical/Detail.bok?no=386
LaRue HandStop Information:
Improved control for those who prefer a grip on the handguard.
LaRue introduced these slide-on HandStops in the Fall of 2008, and have been refining them ever since. They ended up with a simple, robust and economical solution. The one-piece design has no moving parts to break, or seams to rub against. Once installed in position (they fit snugly anywhere on the rail), these devices add structure optimally to the hand, providing better support, recoil management and overall control of the rifle. Giving the rail physical obstructions also keep the support-hand intuitively in proper position, and away from dangerous SBR muzzles and hot barrels.
Note: Installation requires locking in-position with at least two IndexClips (one on either side), or other rail covers that lock in place. Some modification to rail covers may be needed, if you do not use IndexClips.
Specifications:
- Glass-reinforced polymer
- Ergonomically profiled-
- Textured Saddle
- Fits snug on any MIL-STD 1913, held firmly in-place by IndexClips (not supplied)
- Two HandStops supplied for a variety of configurations
Made in USA
Color: Black, UDE
For more information or purchasing see:
stores.homestead.com/Laruetactical/Detail.bok?no=465
MUSIC NOTE:
licensed under Creative Commons: By Attribution 3.0
Song "what you want" played during the credits was written and owned by: kevin macleod of incompetech.com
