![[REVIEW] 3-D Printed Banned Blasters Gears Kriss Vector and Quik (OFD Flycore Nerf Blasters) @NaptownNerf](https://i.ytimg.com/vi/Zh8t4nE5XyM/maxresdefault.jpg)
Uploaded December 2023 | Updated September 2026, 2 hours ago
Today we take a look at two Old Fusion Design Flycore blasters. First is a Kriss Vector replica from Gears, and second is the Quik from Old Fusion Design. Both of these Nerf blasters are 3-D printed, full auto, rocking Banned Blasters Banshee flywheels. Check out the video to see how you could create your own design around the OFD Flycore. And as always let me know your thoughts in the comments.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
OFD Flycore - printables.com/@OFDOldFusionD_316832
github.com/oldfieldadamg
Gears Vector - etsy.com/listing/1463905211/gears-vector
Quik - etsy.com/listing/1257883684/quik
Hardware used:
M3 screws - amzn.to/3TfE1av
Brass inserts - amzn.to/3uYYdDq
Silicon wire - amzn.to/47PILbv
Thumb screw - amzn.to/3RC0gX9 
Electronic parts - outofdarts.com/collections/electronics
Kelly Industries Quik Hardware Kit - kellyindustries.us/collections/flywheel-parts/products/quik-hardware-kit-with-switch-plate
Banned Blasters Flywheels - bannedblasters.com/products/banshee-wheels
Motors - bannedblasters.com/products/banned-blasters-42-3s-motor
OOD Kraken motors - outofdarts.com/products/ood-kraken-motor
Angle Talon Mags - outofdarts.com/products/worker-18-round-angled-talon-short-dart-magazine?variant=32340866826282
Worker darts - outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
3-D Filament:
Blue - proto-pasta.com/collections/all/products/glitter-flake-htpla-v2-winter-blue
Orange - amzn.to/3RLmgit
Gray - shop.fillamentum.com/en-us/products/asa-extrafill-vertigo-grey?variant=39289141854306
Pink/blue - 3djake.com/3djake/magicpla-deep-space?sai=11625
SUBSCRIBE HERE: youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: instagram.com/naptownnerf
My Facebook page: facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-nerf
Time codes:
0:00 - intro
1:31 - OFD Flycore overview
6:02 - Gears Vector
11:47 - Blaster internals
13:30 - Blaster chronograph testing
17:36 - Final thoughts
#nerf #review #3dprinted
Today we take a look at two Old Fusion Design Flycore blasters. First is a Kriss Vector replica from Gears, and second is the Quik from Old Fusion Design. Both of these Nerf blasters are 3-D printed, full auto, rocking Banned Blasters Banshee flywheels. Check out the video to see how you could create your own design around the OFD Flycore. And as always let me know your thoughts in the comments.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
OFD Flycore - printables.com/@OFDOldFusionD_316832
github.com/oldfieldadamg
Gears Vector - etsy.com/listing/1463905211/gears-vector
Quik - etsy.com/listing/1257883684/quik
Hardware used:
M3 screws - amzn.to/3TfE1av
Brass inserts - amzn.to/3uYYdDq
Silicon wire - amzn.to/47PILbv
Thumb screw - amzn.to/3RC0gX9 
Electronic parts - outofdarts.com/collections/electronics
Kelly Industries Quik Hardware Kit - kellyindustries.us/collections/flywheel-parts/products/quik-hardware-kit-with-switch-plate
Banned Blasters Flywheels - bannedblasters.com/products/banshee-wheels
Motors - bannedblasters.com/products/banned-blasters-42-3s-motor
OOD Kraken motors - outofdarts.com/products/ood-kraken-motor
Angle Talon Mags - outofdarts.com/products/worker-18-round-angled-talon-short-dart-magazine?variant=32340866826282
Worker darts - outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
3-D Filament:
Blue - proto-pasta.com/collections/all/products/glitter-flake-htpla-v2-winter-blue
Orange - amzn.to/3RLmgit
Gray - shop.fillamentum.com/en-us/products/asa-extrafill-vertigo-grey?variant=39289141854306
Pink/blue - 3djake.com/3djake/magicpla-deep-space?sai=11625
SUBSCRIBE HERE: youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: instagram.com/naptownnerf
My Facebook page: facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-nerf
Time codes:
0:00 - intro
1:31 - OFD Flycore overview
6:02 - Gears Vector
11:47 - Blaster internals
13:30 - Blaster chronograph testing
17:36 - Final thoughts
#nerf #review #3dprinted
![[REVIEW] 3-D Printed Banned Blasters Gears Kriss Vector and Quik (OFD Flycore Nerf Blasters)](https://i.ytimg.com/vi/Zh8t4nE5XyM/mqdefault.jpg "[REVIEW] 3-D Printed Banned Blasters Gears Kriss Vector and Quik (OFD Flycore Nerf Blasters)
Today we take a look at two
Old Fusion Design Flycore blasters.
First is a Kriss Vector replica from Gears, and second is the Quik from Old Fusion Design. Both of these Nerf blasters are 3-D printed, full auto, rocking Banned Blasters Banshee flywheels.
Check out the video to see how you could create your own design around the OFD Flycore. And as always let me know your thoughts in the comments.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
OFD Flycore - https://www.printables.com/@OFDOldFusionD_316832
https://github.com/oldfieldadamg
Gears Vector - https://www.etsy.com/listing/1463905211/gears-vector
Quik - https://www.etsy.com/listing/1257883684/quik
Hardware used:
M3 screws - https://amzn.to/3TfE1av
Brass inserts - https://amzn.to/3uYYdDq
Silicon wire - https://amzn.to/47PILbv
Thumb screw - https://amzn.to/3RC0gX9 
Electronic parts - https://outofdarts.com/collections/electronics
Kelly Industries Quik Hardware Kit - https://kellyindustries.us/collections/flywheel-parts/products/quik-hardware-kit-with-switch-plate
Banned Blasters Flywheels - https://bannedblasters.com/products/banshee-wheels
Motors - https://bannedblasters.com/products/banned-blasters-42-3s-motor
OOD Kraken motors - https://outofdarts.com/products/ood-kraken-motor
Angle Talon Mags - https://outofdarts.com/products/worker-18-round-angled-talon-short-dart-magazine?variant=32340866826282
Worker darts - https://outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
3-D Filament:
Blue - https://proto-pasta.com/collections/all/products/glitter-flake-htpla-v2-winter-blue
Orange - https://amzn.to/3RLmgit
Gray - https://shop.fillamentum.com/en-us/products/asa-extrafill-vertigo-grey?variant=39289141854306
Pink/blue - https://www.3djake.com/3djake/magicpla-deep-space?sai=11625
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
Time codes:
0:00 - intro
1:31 - OFD Flycore overview
6:02 - Gears Vector
11:47 - Blaster internals
13:30 - Blaster chronograph testing
17:36 - Final thoughts
#nerf #review #3dprinted")
![[Nerf Mod] Cerakote and Painting a Nerf Blaster (Crossbow Stryfe Integration Build Vlog Part 9)](https://i.ytimg.com/vi/_SHzZKp21RE/mqdefault.jpg "[Nerf Mod] Cerakote and Painting a Nerf Blaster (Crossbow Stryfe Integration Build Vlog Part 9)
In this video, I document the trials and tribulations of painting a Nerf blaster... Theres definitely some drama in this episode... Also, I got my parts back from Cerakote! And I finally dyed some flywheels. Let me know all your thoughts and opinions in the comments.
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
Full Build Vlog Playlist: https://youtu.be/yYaIfqXPMlc?si=Skunhx3S4IHDy5_u
Talon Stryfe Mod Video: https://www.youtube.com/watch?v=zHs pkpK5M
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
[Buy Here]
Nerf Stryfe: https://amzn.to/49ojcyn
[Modding Tools and Supplies]
Painters tape:
(3/4in) - https://amzn.to/3UeENDJ
(1 1/2in) - https://amzn.to/49QuJGA
(1/4in) - https://amzn.to/4b42KnW
Primer: https://amzn.to/3Qf1SoK
Adhesion promoter: https://amzn.to/49OCPzx
Paint:
(Wine Glow) https://www.66autocolor.com/products/house-of-kolor-pavo-purple-1023-pearl-base-coat
(Smoke Show) https://painthuffer.bigcartel.com/product/smoke-show
Clearcoat: https://amzn.to/49J9Mxm
Devcon: https://amzn.to/3SUxhP3
6-pack is a much better deal! https://amzn.to/4c6RWGX
Apoxy Sculpt: https://amzn.to/4bE6EoH
File set: https://amzn.to/3SgTaY9
Dremel: https://amzn.to/3Uo2Di5
Dremel flex extension: https://amzn.to/4855gsn
Dremel cutting wheels: https://amzn.to/3SHzqx8
X-Acto knife: https://amzn.to/3SKbJ7m
Blaster work mat: https://amzn.to/474StW2
Deburring tool: https://amzn.to/3HgFdDq
Screwdrivers: https://amzn.to/3urQAWw
Calipers: https://amzn.to/48lfiWc
Square set:  https://amzn.to/3I2vC3u
Side cutters: https://amzn.to/4bIcUvv
Black and Decker palm sander: https://amzn.to/3IFR7Hz
Black and decker replacement 220 grit sanding pads: https://amzn.to/3IH40kG
Hot glue gun: https://amzn.to/49X69Vh
Hot glue sticks: https://amzn.to/3wdCMPF
Sharpie: https://amzn.to/3SIbI2O
https://amzn.to/49Is02x
Sandpaper: https://amzn.to/49h3Ko9
https://amzn.to/49EQcTj
Styrene sheet: https://amzn.to/3UJ9J0y
ABS sheet: https://amzn.to/49jycOC
Polycarbonate sheet: https://amzn.to/3SLSvwY
PPE VERY IMPORTANT!
Gloves: https://amzn.to/3IQqIXD
Dust mask: https://amzn.to/3PA991I
Paint mask: https://amzn.to/49a66Es
Eye protection: https://amzn.to/3x5EVgS
Worker Talon Mags:
15 round - https://amzn.to/3UnaBba
10 round - https://amzn.to/3w0KkoW
18 Banana - https://amzn.to/491Vl81
Worker darts: https://outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Contest details: https://youtu.be/4Mz0oyNy4RQ?si=6d1OWJsXHFCc1aqm
[Music]
A Magical Journey Through Space by Leonell Cassio
https://soundcloud.com/leonellcassio
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: https://bit.ly/a-magical-journey-thro...
Music promoted by Audio Library https://youtu.be/DRwYhxVNwzU
#nerf #nerfmod #mergemasters2024")
![[REVIEW] PROTEAN The Perfect Nerf Flywheel Blaster? (A Modular Takedown 3D Printed Blaster)](https://i.ytimg.com/vi/_vPe6kdf6nE/mqdefault.jpg "[REVIEW] PROTEAN The Perfect Nerf Flywheel Blaster? (A Modular Takedown 3D Printed Blaster)
Today we are reviewing the Protean by Flygonial. This is a 3D-printed Nerf blaster that allows you to swap out flywheel, cages, pusher, assembly, stocks, and more. This will enable you to go from a sub-100 FPS blaster to a nearly 300 FPS blaster, or a geared semi-auto pusher to a select fire solenoid. This flywheel blaster can virtually be anything you want it to be with just a few printed parts and the swap of a few pins. This makes it perfect for any Nerf event you attend. Hope you enjoy the video and let me know your thoughts in the comments.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
3D files: https://www.printables.com/model/815521-protean-modular-takedown-blaster
Hardware Kit: https://silverfoxindustries.shop/collections/hardware/products/protean-by-flygonial-beta-hardware-kit
No printer, no problem! Printed Parts/ DIY Kit: https://silverfoxindustries.shop/collections/blasters/products/protean-by-flygonial
Banana bullet connectors:  https://amzn.to/3V7YkWU
40 WAD Shells: https://amzn.to/3yTlrg8
Green Gas: https://amzn.to/3VpmvRK
Pico Booper: https://www.etsy.com/listing/1430452147/pico-booper-3d-printed-pistol-mounted
Sights: https://www.thingiverse.com/thing:2829229
3D Filaments Used
Orange: https://amzn.to/3QYD6dk
Purple: https://amzn.to/45GnmA4
Black: https://www.prusa3d.com/en/product/prusament-petg-prusa-galaxy-black-1kg/?query=undefined
Blue: https://fillamentumusa.com/collections/pla-crystal-clear-filament/products/pla-extrafill-crystal-clear-iceland-blue
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
0:00 - Intro
1:00 - Overview
11:23 - Banded Blasters set up chronograph testing
16:02 - Banded Blasters set up range/ accuracy testing
19:31 - HvZ set up chronograph testing
22:20 - HvZ set up range/ accuracy testing
24:06 - Final thoughts
Track: Outer Space — SOMM [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Outer Space — SOMM | Free Background ...
Free Download / Stream: https://alplus.io/outer-space
#nerf #3dprinting #3dprinting")
![[NERF MOD] DOLORES A Modified Nerf Hammershot Overview (Foamcon 2018 Silent Auction Blaster)](https://i.ytimg.com/vi/_zJt6sSE66g/mqdefault.jpg "[NERF MOD] DOLORES A Modified Nerf Hammershot Overview (Foamcon 2018 Silent Auction Blaster)
I hope you enjoyed the overview of Dolores, my modified Nerf Hammershot. Please Like and Subscribe. vvv KEEP READING vvv
Subscribe Here: http://www.youtube.com/c/NaptownNerf
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
[Help support the channel by becoming a patron]
My Patreon: https://www.patreon.com/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
My Twitter: https://twitter.com/NaptownNerf
Looking forward to auctioning off this blaster at Foamcon. Very happy with how it turned out and think it will make a sweet sidearm for someone. I cant wait to see everyone this year at Foamcon and Endwar.
Info about Endwar and Foamcon: https://www.facebook.com/events/122838718391384/
Song: Lostboy & Slashtaq - Elysium [NCS Release]
Music provided by NoCopyrightSounds.
Watch:https://youtu.be/QmzWdrvFKdM
Download/Stream: http://ncs.io/ElysiumYO
#nerf #nerfmod #hydrodipping #hydrodip #hydrographics")
![[REVIEW] NERF RIVAL PROMETHEUS MXVIII-20K (Best Rival Blaster Yet?)](https://i.ytimg.com/vi/aab3hnEiTeQ/mqdefault.jpg "[REVIEW] NERF RIVAL PROMETHEUS MXVIII-20K (Best Rival Blaster Yet?)
I hope you enjoyed the review of the Nerf Rival Prometheus. Would you please Like, Subscribe and Share. KEEP READING FOR MORE INFO
Subscribe Here: http://www.youtube.com/c/NaptownNerf
BUY HERE: https://www.amazon.com/Nerf-E0404-Rival-Prometheus-MXVIII-20K/dp/B076JQP4X7/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=cd73f591d787efd691ceda36c2c6bf20&creativeASIN=B076JQP4X7
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
[Help support the channel by becoming a patron]
My Patreon: https://www.patreon.com/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
My Twitter: https://twitter.com/NaptownNerf
Music by https://www.soundcloud.com/ikson
#nerf #nerfrival #nerfreview #Rivalprometheus #nerfyoutuber #nerfprometheusreview #nerf2018 #rival")
![[NERF MOD] GALACTIC STRYFE (An Anniversary Gift for my Wife)](https://i.ytimg.com/vi/b6Yx-fcY15Q/mqdefault.jpg "[NERF MOD] GALACTIC STRYFE (An Anniversary Gift for my Wife)
Hope you enjoyed my modified Nerf Galactic Stryfe, possibly my nicest Stryfe mod yet. Would you please Like, Subscribe and Share to keep this channel growing. Also dont forget to follow me on the platforms linked below.
Subscribe Here: http://www.youtube.com/c/NaptownNerf
NAPTOWN NERF PATCHES: https://www.etsy.com/shop/BlasterCore?ref=simple-shop-header-name&listing_id=649760073
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
[Help support the channel by becoming a patron]
My Patreon: https://www.patreon.com/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
My Twitter: https://twitter.com/NaptownNerf
2k Clear Coat: https://www.amazon.com/SprayMax-Glamour-Gloss-Aerosol-Clear/dp/B0082LJMC6/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=2b8df37f3fbd7e67978506e4349cd093&creativeASIN=B0082LJMC6
Vinyl Dye: https://www.amazon.com/Dupli-Color-HVP106-Black-Performance-Fabric/dp/B00B3UZBSC/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=e0d0d167775fdf22e88e5a2988966fd3&creativeASIN=B00098PO3G&th=1
Glitter Effects: https://www.amazon.com/Dupli-Color-EEFX10007-Clear-Effex-oz/dp/B00098PO0O/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=e77b6f25bac4031873dd565f5a663fff&creativeASIN=B00098PO0O
Tamiya Color Transparent Pink: https://www.amazon.com/Tamiya-America-Polycarbonate-Translucent-TAM86040/dp/B0000WRZYW/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=3625d8cf305c086683c43da7bb2122cf&creativeASIN=B0000WRZYW
Music: Voyage by LEMMiNO http://goo.gl/YmnOAx
#nerf #nerfmod #naptownnerf")
![[NERF LOADOUT] HvZ ENDWAR 2019](https://i.ytimg.com/vi/bNxy_RyiGT8/mqdefault.jpg "[NERF LOADOUT] HvZ ENDWAR 2019
Hope you enjoyed my Nerf Loadout for Endwar 2019. Super excited for Foamcon, Endwar and The Foam Pro Tour. Check out the links below to find any of the product I use in my loadout, and while youre at it would you please Like, Subscribe and Share to keep this channel growing.
Subscribe Here: http://www.youtube.com/c/NaptownNerf
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
[Help support the channel by becoming a patron]
My Patreon: https://www.patreon.com/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
My Twitter: https://twitter.com/NaptownNerf
NAPTOWN NERF PATCHES: https://www.etsy.com/shop/BlasterCore?ref=simple-shop-header-name&listing_id=649760073 (You should be able to buy these fairly soon here)
Buy Gear Here:
Condor chest rig: https://www.amazon.com/Modular-Chest-Rig-Color-Black/dp/B010Y5E1U0/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=8a2f75da7556f7f3014cc76d1fab16ac&creativeASIN=B010Y5E1U0
Admin pouch: https://www.amazon.com/Condor-Admin-Pouch-Flashlight-pouch/dp/B005QRSAKE/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=c0bb1a866f4f617c4bc512b074897534&creativeASIN=B005QRSAKE
Dump pouch: https://www.amazon.com/Condor-3-Fold-Recovery-Pouch-Black/dp/B005WUDRN0/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=d0283c825d410d5515d3704c403069d2&creativeASIN=B005WUDRN0
Ammo pouch: https://www.amazon.com/Condor-Outdoors-MA2-001-Ammo-Pouch/dp/B00865O0HA/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=5d8fac87f7c2171ad44513abe04fa53c&creativeASIN=B00865O0HA
Narrowbase mag holders: http://narrowbase.com/
Chest rig (A great cheap option): https://www.amazon.com/VISM-NcStar-Chest-CVAKCR2921B-Black/dp/B005E98Z4K/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=ff02da38e1667c1a74a28e5875997497&creativeASIN=B005E98Z4K
Red EMT pouch: https://www.amazon.com/gp/product/B00AEM1H4C/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00AEM1H4C&linkCode=as2&tag=napto-20&linkId=171c146300c2dc78d7f6b4372d1cb8a2
Hydration backpack: https://www.amazon.com/Lancer-Tactical-Weight-Hydration-Backpack/dp/B00ALAS6E6/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=65e52a13985425658c2a779063259b53&creativeASIN=B00ALAS6E6
Hydration bladder: https://www.amazon.com/gp/product/B0068UV4MO?ie=UTF8&tag=napto-20&camp=1789&linkCode=xm2&creativeASIN=B0068UV4MO
Walkie-talkie / two-way radio: https://www.amazon.com/gp/product/B007H4VT7A?ie=UTF8&tag=napto-20&camp=1789&linkCode=xm2&creativeASIN=B007H4VT7A
Radio speaker: https://www.amazon.com/gp/product/B008RZ0EQ0?ie=UTF8&tag=napto-20&camp=1789&linkCode=xm2&creativeASIN=B008RZ0EQ0
Transparent Black Worker 22 Mags: https://www.amazon.com/Worker-Banana-Magazine-N-strike-Transparent/dp/B06XKB28XN/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=e990897eb67d14acd1d2ced09d0cc626&creativeASIN=B06XKB28XN
Clear Worker 22 Mags: https://www.amazon.com/Worker-Darts-Magazine-Reload-N-strike/dp/B01F6RTKNE/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=609253e40ff926c3bd1ffc86c11d5433&creativeASIN=B01F6RTKNE
One point sling: http://www.containmentcrew.com/product-category/bp/bp_tac/
Drop Leg Mag Holders and Stryfe Holster: Unfortunately it looks like Apex tactical solutions is no longer in business or he is switched website.Here is the website that I last used to purchase from him. https://www.bonanza.com/booths/apextactical
FDL3: https://www.projectfdl.com/
Tactical Light: https://www.amazon.com/TrustFire-Compact-Tactical-Flashlight-Picatinny/dp/B07GXGXB77/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=1a713a8c555bd7f6fc4336fefa040bbf&creativeASIN=B07GXGXB77
Red Plastic Gel: I couldnt find a link to what I used to but this should work well also. https://www.amazon.com/Duck-896026-Automotive-2-Inch-6-Feet/dp/B001DYZUYI/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=494f9f3c91da9cd67954fa740f21f6bb&creativeASIN=B001DYZUYI
Ammo Counter:
https://www.facebook.com/ammocounter/
https://www.etsy.com/shop/AmmoCounter
https://www.facebook.com/ammocounter/videos/2266554800089296/
Worker Stock: https://www.amazon.com/hAohAnwuyg-Hunting-Equipment-Outdoor-Adjustable/dp/B07T5XSCFG/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=42c2262d420960012bc113c80106eec1&creativeASIN=B07T5XSCFG
Worker Folding Buffer Tube: Folding Buffer Tube: https://www.amazon.com/Worker-Shoulder-Stock-Adaptor-N-strike/dp/B07CFW7BTK/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=cbcadf3573fdba718a54d2190ac30bd4&creativeASIN=B07CFW7BTK
Music: I Wanna Live by Novalight
https://soundcloud.com/novalight")
![[TESTED] XYL Unicorn Blaster Black Raisin upgrade kit](https://i.ytimg.com/vi/bPbvYLal8T8/mqdefault.jpg "[TESTED] XYL Unicorn Blaster Black Raisin upgrade kit
In this video, I test the upgrade kit for the XYL MK9 Unicorn foam dart blaster from Black Raisins. In my last video, I fully upgraded the Unicorn with this kit, along with a custom dye job and 3-D printed parts. Today, I tested this with the worker Seagull (8in), Harrier (12in), and a 9 1/2 inch Unicorn upgrade barrel with both spring options. I test with both Worker Gen 3 and Worker Gen 3 bamboo darts. All this testing was very informative and glad I went through the effort of firing hundreds of darts over the chronograph to figure out the best configurations. Hope you find this video useful.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
Unicorn Review: https://youtu.be/Ey3gOEJYFw8?si=dDxlySEky8dOvpXz
Unicorn Mod Video: https://youtu.be/8bCB9zfGFDI?si=yyDJof3UL9P-ryq0
[Buy Here]
Unicorn Blaster: https://outofdarts.com/products/xyl-unicorn-blaster or https://blackraisins.com/collections/g-o-s-games-of-softdart/products/unicorn-blaster-by-xyl-in-stock-now
Worker darts - https://outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Worker bamboo darts - https://amzn.to/3tmsjk5
Black Raisins Unicorn Upgrade Kit: https://blackraisins.com/collections/g-o-s-games-of-softdart/products/upgrades-for-unicorn-blaster-by-xyl-in-stock-now
Upgrade Barrel: (this is a longer threaded version of the one I have, which is an upgrade but 2in longer) https://outofdarts.com/products/xyl-unicorn-25cm-upgraded-barrel
BCAR - https://blackraisins.com/collections/g-o-s-games-of-softdart/products/gos-the-huntsmen-king-series-bcar-1
Compatible magazines - https://amzn.to/462LvRT
Dye - https://amzn.to/3RJOOsj
Blaster work mat - https://amzn.to/474StW2
3-D Printed Files:
Buffer tube - https://www.thingiverse.com/thing:6161281
Top Picatinny - https://www.thingiverse.com/thing:6172512
Threaded barrel piece - https://www.thingiverse.com/thing:6243242
Hardware needed with 3-D printed parts:
M3 screws (for buffer tube) - https://amzn.to/3RqDHTR
M4 bolt (for buffer tube) - https://amzn.to/3RLeHaj
Brass inserts (for Piccini rail) - https://amzn.to/3tccyw1
Out of Darts dye mod guide - https://youtu.be/ZuJNDdfLT0A?si=8Ydwea70ONjE5meM
Time codes:
0:00 - Intro and testing overview
1:20 - Testing 12-inch barrel with high-powered spring
3:50 - Worker barrel issues
4:30 - Testing 8-inch barrel with high-powered spring
6:50 - Testing 8-inch barrel with low-powered spring
9:07 - Testing 12-inch barrel with low-powered spring
11:36 - Testing 9 1/2 inch barrel with low-power spring
14:09 - Testing 9 1/2 inch barrel with high-power spring
16:00 - Black Raisin Unicorn upgrade kit review, testing discussion, and final thoughts
#nerf #nerfmod #tested")
![[REVIEW] FR-1 VIPER (A 3-D Printed Nerf Micro Flywheel Short Dart Revolver)](https://i.ytimg.com/vi/bV5QEaZE2Ko/mqdefault.jpg "[REVIEW] FR-1 VIPER (A 3-D Printed Nerf Micro Flywheel Short Dart Revolver)
Hope you enjoyed the review of the FR-1 VIPER 3-D printed Nerf flywheel revolver. This is a really awesome nerf revolver mod form Freedom Blasters. Definitely check it out on Thingiverse and dont forget to Like , Subscribe and Share!
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
[Help support the channel by becoming a patron]
My Patreon: https://www.patreon.com/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
My Twitter: https://twitter.com/NaptownNerf
PRINT YOUR OWN: https://www.thingiverse.com/thing:3621882
Music by https://www.soundcloud.com/liqwyd
#nerf #nerfreview #naptownnerf")
![[REVIEW] NERF Zombie Strike QUADROT (A Sweet Little Nerf Pistol!)](https://i.ytimg.com/vi/bVCrcp3TJ4o/mqdefault.jpg "[REVIEW] NERF Zombie Strike QUADROT (A Sweet Little Nerf Pistol!)
I hope you enjoyed the review of the Nerf Zombie Strike Quadrot. This little Nerf pistol is not bad at all! Would you please Like, Subscribe and Share. KEEP READING FOR MORE INFO.
BUY HERE: https://www.amazon.com/Nerf-E2673-Zombie-Strike-Quadrot/dp/B07DFCLMD3/ref=as_sl_pc_tf_til?tag=napto-20&linkCode=w00&linkId=b0d3eb6d7677aa8229831920fbb733aa&creativeASIN=B07DFCLMD3
Subscribe Here: http://www.youtube.com/c/NaptownNerf
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
[Help support the channel by becoming a patron]
My Patreon: https://www.patreon.com/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
My Twitter: https://twitter.com/NaptownNerf
Music by https://www.soundcloud.com/liqwyd
#nerf #nerfreview #nerfpistol #nerfzombiestrike #nerfnation #naptownnerf")
