Steve Peterson | Rev 2 Clock Updates @stevesclocks | Uploaded September 2023 | Updated October 2024, 1 hour ago.
Features from my latest clock have been added into five of my older designs.
Three wall clocks added a solid connection between the pallet and pendulum plus adjustable height back standoffs. These edits are recommended to improve the pendulum efficiency. Existing clocks would see improved reliability by re-printing the pallet.
The two easy-build wall clocks have an improved design to prevent gear 3 from pushing against the escapement. These edits extend upon the previous helical gear update and completely isolate gear 3 from the escapement. Existing clocks would be more reliable by re-printing the updated gear 3 and spacer 1.
You can find the updates on MyMiniFactory in the area where you originally downloaded each design. The new parts have "_rev2.stl" suffixes in the file names.
SP1 - Small Pendulum Wall Clock: myminifactory.com/object/3d-print-small-pendulum-wall-clock-136608
SP2 - Large Pendulum Wall Clock: myminifactory.com/object/3d-print-large-pendulum-wall-clock-137009
SP3 - Medium Pendulum wall Clock: myminifactory.com/object/3d-print-medium-pendulum-wall-clock-142460
SP4 - Large Easy Build Clock: myminifactory.com/object/3d-print-large-easy-build-clock-with-21-day-runtime-159691
SP5 - 32 Day Easy Build Clock: myminifactory.com/object/3d-print-32-day-clock-easy-build-156759
You should still have access to the new files as long as you still have the MyMiniFactory account that was used to purchase the original design. The updated files have also been uploaded to a free download area at myminifactory.com/object/3d-print-wall-clock-rev-2-updates-321782
Most of these features came from my newest wall clock at myminifactory.com/object/3d-print-crazy-gear-wall-clock-309948 This is my best and most reliable wall clock so far. I recommend this design if you planning to build your first 3D printed wall clock.
Contents:
0:00 Intro
0:11 Pallet Arms
1:10 Adjustable Standoffs
1:23 Easy Build Updates
2:18 Easy Build Assembly
3:39 Recommendations
4:14 Summary
Features from my latest clock have been added into five of my older designs.
Three wall clocks added a solid connection between the pallet and pendulum plus adjustable height back standoffs. These edits are recommended to improve the pendulum efficiency. Existing clocks would see improved reliability by re-printing the pallet.
The two easy-build wall clocks have an improved design to prevent gear 3 from pushing against the escapement. These edits extend upon the previous helical gear update and completely isolate gear 3 from the escapement. Existing clocks would be more reliable by re-printing the updated gear 3 and spacer 1.
You can find the updates on MyMiniFactory in the area where you originally downloaded each design. The new parts have "_rev2.stl" suffixes in the file names.
SP1 - Small Pendulum Wall Clock: myminifactory.com/object/3d-print-small-pendulum-wall-clock-136608
SP2 - Large Pendulum Wall Clock: myminifactory.com/object/3d-print-large-pendulum-wall-clock-137009
SP3 - Medium Pendulum wall Clock: myminifactory.com/object/3d-print-medium-pendulum-wall-clock-142460
SP4 - Large Easy Build Clock: myminifactory.com/object/3d-print-large-easy-build-clock-with-21-day-runtime-159691
SP5 - 32 Day Easy Build Clock: myminifactory.com/object/3d-print-32-day-clock-easy-build-156759
You should still have access to the new files as long as you still have the MyMiniFactory account that was used to purchase the original design. The updated files have also been uploaded to a free download area at myminifactory.com/object/3d-print-wall-clock-rev-2-updates-321782
Most of these features came from my newest wall clock at myminifactory.com/object/3d-print-crazy-gear-wall-clock-309948 This is my best and most reliable wall clock so far. I recommend this design if you planning to build your first 3D printed wall clock.
Contents:
0:00 Intro
0:11 Pallet Arms
1:10 Adjustable Standoffs
1:23 Easy Build Updates
2:18 Easy Build Assembly
3:39 Recommendations
4:14 Summary