Sewing Seeds Of Love | Retractable Key Pouch / Pull ‘n’ Scan Token Holder @SewingSeedsOfLove | Uploaded January 2021 | Updated October 2024, 2 hours ago.
Pattern Link
sewingseedsoflovestudio.com/products/pull-n-scan-pattern
Pull 'n' Scan is a beginner-friendly sewing project that requires little materials to make. It is also an excellent scrap-buster! This handy little pouch protects your tokens from scratches (or keep your keys from scratching your phone when placed together!). Clip it to your bag or pocket and simply pull token out easily for scanning.
This generic design is suitable for all token shapes. If you prefer to have something more fitted for your token, please check out our first original token holder design here - SSOL Trace Together Token Holder - sewingseedsoflovestudio.com/products/airpod-holder-pattern.
The pattern comes in 2 sizes -
(a) Pull 'n' Scan - fits all SG TraceTogether token shapes.
(b) Retractable Key Pouch - fits car and house keys.
Finished dimensions (Width x Height) -
(a) Pull 'n' Scan - 7cm x 9cm
(b) Retractable Key Pouch - 7cm x 11cm
You would also have the option to make it in One-Tone or Two-Tone with a accent on the bottom edge.
PS*
This project was created to house the little tokens that all Singaporeans are required to carry around whenever they're out and about.
What is a TraceTogether Token?
https://www.tracetogether.gov.sg
bbc.com/news/technology-53146360
Pattern Link
sewingseedsoflovestudio.com/products/pull-n-scan-pattern
Pull 'n' Scan is a beginner-friendly sewing project that requires little materials to make. It is also an excellent scrap-buster! This handy little pouch protects your tokens from scratches (or keep your keys from scratching your phone when placed together!). Clip it to your bag or pocket and simply pull token out easily for scanning.
This generic design is suitable for all token shapes. If you prefer to have something more fitted for your token, please check out our first original token holder design here - SSOL Trace Together Token Holder - sewingseedsoflovestudio.com/products/airpod-holder-pattern.
The pattern comes in 2 sizes -
(a) Pull 'n' Scan - fits all SG TraceTogether token shapes.
(b) Retractable Key Pouch - fits car and house keys.
Finished dimensions (Width x Height) -
(a) Pull 'n' Scan - 7cm x 9cm
(b) Retractable Key Pouch - 7cm x 11cm
You would also have the option to make it in One-Tone or Two-Tone with a accent on the bottom edge.
PS*
This project was created to house the little tokens that all Singaporeans are required to carry around whenever they're out and about.
What is a TraceTogether Token?
https://www.tracetogether.gov.sg
bbc.com/news/technology-53146360
![[Product Demo] SSOL 3-in-1 Mask Pouch](https://i.ytimg.com/vi/WxEBeaJxLRM/hqdefault.jpg "[Product Demo] SSOL 3-in-1 Mask Pouch
A nifty little pouch that allows you to store 3 masks together! No zips or buttons to fiddle with. Just a simple elastic loop for closure.
A beginner-friendly project that only requires 3 lines of sewing from beginning to completion!
Get your the full video tutorial here!
https://sewingseedsoflovestudio.com/products/3-in-1-mask-pouch
Facebook Page
https://www.facebook.com/sewingseedsoflove/
Website
https://sewingseedsoflovestudio.com/")
![How to make a bifold vinyl wallet / long wallet / slim wallet [Bloom Slender Wallet]](https://i.ytimg.com/vi/Yfwx6r47DKU/hqdefault.jpg "How to make a bifold vinyl wallet / long wallet / slim wallet [Bloom Slender Wallet]
Pattern Link:
https://sewingseedsoflovestudio.com/products/bloom-slender-wallet-pattern")
![[Starbucks, Bubble Tea, Coffee] Reusable Cup Holder/Sleeve/Cozy with Grab Handle](https://i.ytimg.com/vi/ZXzV1ru-KcA/hqdefault.jpg "[Starbucks, Bubble Tea, Coffee] Reusable Cup Holder/Sleeve/Cozy with Grab Handle
DIY reusable cup holder/sleeve with grab handle
Pattern link:
https://sewingseedsoflovestudio.com/products/goldilocks-cup-holder-pattern
Introduction
Too hot? Too cold? Drop your favourite drink in our latest cup holder and free your hands from the extreme temperatures!
Finding the perfect cup fit to suit all cup sizes in the market is akin to Goldilocks searching for her ideal (porridge/chair/bed). Every cup has a different upper and lower circumference measurements. However, after a series of intense testing and tweaks, I arrived at a generic (gentle arc) shape pattern (and method) that will suit most cups sizes.
In the video tutorial, I have also shared 2 different ways of construction - Perfect Fit and Expandable Fit. The expandable version are sewn in with small strips of elastic, which allows for some give/stretch to suit cup sizes in between.
I hope this pattern will provide some ease to users who may have difficulty handling the cups (without any holders) as well as users who just want to have some fun making/personalising their very own holders.
Join Us!
Join our Facebook Group for the latest updates! Share your creations made from SSOL (Sewing Seeds of Love) Designs in our safe and friendly sewing community!
https://www.facebook.com/groups/1588984701178450
Product Features
3 sizes - Small (fits small coffee cups), Medium (fits most Bubble Tea cups) and Large (fits Starbucks Grande, most Bubble Tea cups)
2 heights - Short, Tall
3 different grab handle lengths
Pattern Details
There are printable pattern pieces in this PDF pattern for your home printer, available in both A4 and Letter format. Please note that there are no written instructions in this pattern. A video tutorial (right at the bottom of this page) is available for the visual learners.
Materials and Supplies
Recommended material - quilting cotton or taffeta nylon waterproof fabric
[1] Fat Quarter for main fabric (45 x 55cm or 18” x 22”)
[1] Fat Quarter for lining fabric (45 x 55cm or 18” x 22”)
[1] Fat Quarter for lightweight woven interfacing
(45 x 55cm or 18” x 22”)
[2] or [3] 1/4 4cm elastic strips (depends which height you are making)
Skill Level
Beginner")
