Uploaded October 2021 | Updated September 2026, 22 hours ago
Follow along as I bring two Chevrolet 2 Ton Trucks back to life. I'll show you what I did to get them running and operating properly. Then we'll turn our attention to the cosmetics and make these trucks look AWESOME!!
These are pretty unique trucks because they can scissor straight up 16 feet, lifting 8 tons (16,000lbs) vertically. Then you can bring them back down, pull a couple pins and then it will become a dump truck and tilt the bed at an angle, dumping whatever is on the bed. Both trucks have stake pocket beds so that sides can be added for hauling things.
The beds are 20' long and each has 1 set of outriggers that can be put down in order to make them more stable. The uses for these trucks are endless, but most commonly they are used in the roofing industry to move materials and people safely to the roof on commercial buildings. Other uses are as mobile scaffolding to install gutters, soffits, siding, or other construction materials.
0:00 Intro
0:10 - Introducing the Chevy C6500 & it's issues
2:18 - Replacing the fuses & Fixing the electrical
3:49 - Chevy 7.4l V8 (454) with an Allison AT545 Automatic Transmission
7:52 - Getting the engine to CRANK!
9:46 - Getting the engine to Top Dead Center
10:55 - Replacing the Distributor
13:10 - Adding Fuel
13:40 - Checking for Spark
14:04 - FINALLY Getting it to FIRE UP!!
16:00 - Fixing the FUEL Pump AGAIN!
23:10 - Got Both CHEVY Trucks Home!
25:59 - Pressure washing Both Trucks
29:44 - Painting the Kodiak
37:05 - Painting the Grille, Bowtie, & Headlight Bezels
38:50 - Chevrolet Kodiak 2 Ton Cold Start
41:03 - Operating the Scissor / Dump Bed on the Kodiak
43:32 - The KODIAK is FINISHED!
44:26 - Painting the Chevy C6500
45:09 - Discussing the C6500 and it's problems!
56:21 - Chevrolet C6500 2 Ton Cold Start
58:36 - Operating the Scissor / Dump Bed on the C6500
59:52 - The C6500 is FINISHED!
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
#ScissorLiftDumpTruck #FlippingTrucks #SalvageWorkshop
Follow along as I bring two Chevrolet 2 Ton Trucks back to life. I'll show you what I did to get them running and operating properly. Then we'll turn our attention to the cosmetics and make these trucks look AWESOME!!
These are pretty unique trucks because they can scissor straight up 16 feet, lifting 8 tons (16,000lbs) vertically. Then you can bring them back down, pull a couple pins and then it will become a dump truck and tilt the bed at an angle, dumping whatever is on the bed. Both trucks have stake pocket beds so that sides can be added for hauling things.
The beds are 20' long and each has 1 set of outriggers that can be put down in order to make them more stable. The uses for these trucks are endless, but most commonly they are used in the roofing industry to move materials and people safely to the roof on commercial buildings. Other uses are as mobile scaffolding to install gutters, soffits, siding, or other construction materials.
0:00 Intro
0:10 - Introducing the Chevy C6500 & it's issues
2:18 - Replacing the fuses & Fixing the electrical
3:49 - Chevy 7.4l V8 (454) with an Allison AT545 Automatic Transmission
7:52 - Getting the engine to CRANK!
9:46 - Getting the engine to Top Dead Center
10:55 - Replacing the Distributor
13:10 - Adding Fuel
13:40 - Checking for Spark
14:04 - FINALLY Getting it to FIRE UP!!
16:00 - Fixing the FUEL Pump AGAIN!
23:10 - Got Both CHEVY Trucks Home!
25:59 - Pressure washing Both Trucks
29:44 - Painting the Kodiak
37:05 - Painting the Grille, Bowtie, & Headlight Bezels
38:50 - Chevrolet Kodiak 2 Ton Cold Start
41:03 - Operating the Scissor / Dump Bed on the Kodiak
43:32 - The KODIAK is FINISHED!
44:26 - Painting the Chevy C6500
45:09 - Discussing the C6500 and it's problems!
56:21 - Chevrolet C6500 2 Ton Cold Start
58:36 - Operating the Scissor / Dump Bed on the C6500
59:52 - The C6500 is FINISHED!
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
#ScissorLiftDumpTruck #FlippingTrucks #SalvageWorkshop
