Zack Freedman | Resin Rules the Nerf Battlefield! Caliburn 4 + Bulwark, Printed + Tested @ZackFreedman | Uploaded February 2022 | Updated October 2024, 1 hour ago.
Is it worth 3D printing resin blasters? Actually, yes!
Everything in this episode* is printed on an Anycubic Photon Mono X 6K and Anycubic Photon Ultra! Get these powerful machines at the best price: bit.ly/3oMIxgB!
Can you 3D print blasters in resin? Ask /r/nerf, NerfHaven, or basically anyone, and you'll get a deafening "HECK NO!" But I'm a cyborg on the edge who don't play by the rules. I printed and reviewed two bleeding-edge blasters, and they didn't just work great in resin... they might actually work better than filament! FIGHT ME DAWG!
🏆 Support the channel: patreon.com/zackfreedman
👾 Join our supportive project-buildin' Discord community: discord.gg/voidstarlab
🐓 Cancel me: twitter.com/zackfreedman
📷 I should really post stuff to Instagram: https://instagr.am/zackfreedma
The Bulwark is the dual-stage Frontline Foam version, with a 10 dart-per-second pusher motor, double pusher, 3S LiPo, Fang ReVamped motors, and Worker canted grooved Hurricane flywheels.
The C4 is the most current Captain Slug release as of February 2022, with a K25 spring, sussy printed ram core, Frontline Foam black acetyl pusher, and 14" long 0.527" ID barrel.
I wasn't paid or encouraged to endorse anything - my opinions were written after completing and testing both blasters.
This video was sponsored by Anycubic!
🖨 Grab the Photon Mono X 6K: bit.ly/3uHNdIK
🚿 Jumbo-sized Wash and Cure Plus: bit.ly/3661BjD
⚗ Craftsman resin (better for minis than blasters!) bit.ly/3GFYonh
Support the creators of these blasters!
🐂🐶 Bulwark by JackRabbitNerfer: etsy.me/3GFZVd1
⚔4️⃣ Caliburn 4 by Captain Slug (Free STLs in description) etsy.me/3GMo95w
Blaster kits, darts, mags, and battery provided by Frontline Foam!
🐂🐶 Print-your-own Bulwark kit: bit.ly/3GK5CXz
⚔4️⃣ Caliburn C4 (kits coming soon) bit.ly/34yJ1QK
🔫 Free improved blaster STLs: bit.ly/3swHsLc
Resins provided by Siraya Tech!
💙 Blu (clear version) amzn.to/3sATF1g
💪 Tenacious: amzn.to/3HHNRJG
👩🔬 Build (better for fit-and-finish prototyping) amzn.to/3Bc6qDk
Flexible Build System provided by Wham Bam Systems!
🛌 Double Wham for Mono X: bit.ly/3rF64SK
(available for nearly every other printer too!)
🤚 Slap Mat silicone work surface: bit.ly/33dLnE1
Other neat stuff from the episode:
📸 ResinLapse by fellow YouTuber Uncle Jessie! bit.ly/3HK8NQo
📦 Boxomo enclosure: boxomoenclosures.com
🎯 Worker Gen 3 Darts: amzn.to/3gGbIxI
⌚ Acetech AC5000 Chronograph: amzn.to/34zigvx (couldn't keep up with the Bulwark)
🔦 UV flashlight (good for tight spots and cleanup) amzn.to/3sxIMgJ
*except the rollers, those were printed in:
🧵 Fluorodur PVDF: bit.ly/3kCKyKD
🖨 on my Lulzbot Taz Sidekick 747: shop.lulzbot.com/sidekick747
**Fine jeez, the opening time lapse is actually a Creality Halot-Sky. I took it ages ago. It's not actually blaster parts, I think it's some DND setpieces.
SFX credits:
Interference: Partners in Rhyme
Everything else: zapsplat.com
If I were to put a Spaceballs clip in the video, I would need to credit Mel Brooks, Ronny Graham, Thomas Meehan, and MGM/UA.
Is it worth 3D printing resin blasters? Actually, yes!
Everything in this episode* is printed on an Anycubic Photon Mono X 6K and Anycubic Photon Ultra! Get these powerful machines at the best price: bit.ly/3oMIxgB!
Can you 3D print blasters in resin? Ask /r/nerf, NerfHaven, or basically anyone, and you'll get a deafening "HECK NO!" But I'm a cyborg on the edge who don't play by the rules. I printed and reviewed two bleeding-edge blasters, and they didn't just work great in resin... they might actually work better than filament! FIGHT ME DAWG!
🏆 Support the channel: patreon.com/zackfreedman
👾 Join our supportive project-buildin' Discord community: discord.gg/voidstarlab
🐓 Cancel me: twitter.com/zackfreedman
📷 I should really post stuff to Instagram: https://instagr.am/zackfreedma
The Bulwark is the dual-stage Frontline Foam version, with a 10 dart-per-second pusher motor, double pusher, 3S LiPo, Fang ReVamped motors, and Worker canted grooved Hurricane flywheels.
The C4 is the most current Captain Slug release as of February 2022, with a K25 spring, sussy printed ram core, Frontline Foam black acetyl pusher, and 14" long 0.527" ID barrel.
I wasn't paid or encouraged to endorse anything - my opinions were written after completing and testing both blasters.
This video was sponsored by Anycubic!
🖨 Grab the Photon Mono X 6K: bit.ly/3uHNdIK
🚿 Jumbo-sized Wash and Cure Plus: bit.ly/3661BjD
⚗ Craftsman resin (better for minis than blasters!) bit.ly/3GFYonh
Support the creators of these blasters!
🐂🐶 Bulwark by JackRabbitNerfer: etsy.me/3GFZVd1
⚔4️⃣ Caliburn 4 by Captain Slug (Free STLs in description) etsy.me/3GMo95w
Blaster kits, darts, mags, and battery provided by Frontline Foam!
🐂🐶 Print-your-own Bulwark kit: bit.ly/3GK5CXz
⚔4️⃣ Caliburn C4 (kits coming soon) bit.ly/34yJ1QK
🔫 Free improved blaster STLs: bit.ly/3swHsLc
Resins provided by Siraya Tech!
💙 Blu (clear version) amzn.to/3sATF1g
💪 Tenacious: amzn.to/3HHNRJG
👩🔬 Build (better for fit-and-finish prototyping) amzn.to/3Bc6qDk
Flexible Build System provided by Wham Bam Systems!
🛌 Double Wham for Mono X: bit.ly/3rF64SK
(available for nearly every other printer too!)
🤚 Slap Mat silicone work surface: bit.ly/33dLnE1
Other neat stuff from the episode:
📸 ResinLapse by fellow YouTuber Uncle Jessie! bit.ly/3HK8NQo
📦 Boxomo enclosure: boxomoenclosures.com
🎯 Worker Gen 3 Darts: amzn.to/3gGbIxI
⌚ Acetech AC5000 Chronograph: amzn.to/34zigvx (couldn't keep up with the Bulwark)
🔦 UV flashlight (good for tight spots and cleanup) amzn.to/3sxIMgJ
*except the rollers, those were printed in:
🧵 Fluorodur PVDF: bit.ly/3kCKyKD
🖨 on my Lulzbot Taz Sidekick 747: shop.lulzbot.com/sidekick747
**Fine jeez, the opening time lapse is actually a Creality Halot-Sky. I took it ages ago. It's not actually blaster parts, I think it's some DND setpieces.
SFX credits:
Interference: Partners in Rhyme
Everything else: zapsplat.com
If I were to put a Spaceballs clip in the video, I would need to credit Mel Brooks, Ronny Graham, Thomas Meehan, and MGM/UA.
