Uploaded September 2021 | Updated September 2026, 3 weeks ago
This video is made as a guideline to show you how to replace the rear strut assemblies on a Toyota Camry Station Wagon. This will apply to all Camry Wagons, with the exception of a couple minor differences which you can probably figure out.
I hope it was helpful!
Torque Specs:
Rear Strut to Knuckle: 188 ft.lbs.
Rear Strut Mount Nuts: 29 ft.lbs.
Lug Nuts: 76 ft.lbs.
Parts:
- Rear Coil Springs: rockauto.com/en/catalog/toyota,1996,camry,3.0l+v6,1273564,suspension,coil+spring,7512
- Rear Strut (KYB 334134 & KYB 334133): rockauto.com/en/catalog/toyota,1996,camry,3.0l+v6,1273564,suspension,strut,7584
Other related videos:
- 1996 Toyota Camry Wagon Playlist: youtube.com/playlist?list=PL-CJZXfrURuNbFKm8L0GcoifCEIwxDNET
Tools used in this video:
- ½ inch 6 Pt. Deep Impact Socket Set: harborfreight.com/13-pc-12-in-drive-metric-impact-deep-socket-set-69279.html
- ½” Pneumatic impact Gun: harborfreight.com/12-in-aluminum-air-impact-wrench-62627.html
- 21 Gal. Oiled Air Compressor: harborfreight.com/21-gal-25-hp-125-psi-cast-iron-vertical-air-compressor-61454.html
- Basic Wrench Set: amzn.to/39eg1fD
- Bauer Impact Driver: harborfreight.com/20v-hypermax-lithium-cordless-14-in-hex-compact-impact-driver-tool-only-56724.html
- 20V 3Ah Bauer Battery: harborfreight.com/20v-hypermax-lithium-30-ah-high-capacity-battery-63631.html
- 3/8” Shallow 12-Point Metric/SAE Sockets: harborfreight.com/21-pc-38-in-drive-sae-metric-high-visibility-socket-set-61954.html
- 3/8” Ratchet: harborfreight.com/38-in-drive-low-profile-ratchet-62328.html
- 6 Ton Jack Stands: harborfreight.com/6-ton-steel-jack-stands-61197.html
- 3 Ton Low Profile Jack: harborfreight.com/3-ton-low-profile-steel-heavy-duty-service-jack-with-rapid-pump-61282.html
Please note that I am not a professional mechanic, nor am I saying that you must do exactly what I say in this video. Perform these repairs at your own risk! Safety first ;)
This video is made as a guideline to show you how to replace the rear strut assemblies on a Toyota Camry Station Wagon. This will apply to all Camry Wagons, with the exception of a couple minor differences which you can probably figure out.
I hope it was helpful!
Torque Specs:
Rear Strut to Knuckle: 188 ft.lbs.
Rear Strut Mount Nuts: 29 ft.lbs.
Lug Nuts: 76 ft.lbs.
Parts:
- Rear Coil Springs: rockauto.com/en/catalog/toyota,1996,camry,3.0l+v6,1273564,suspension,coil+spring,7512
- Rear Strut (KYB 334134 & KYB 334133): rockauto.com/en/catalog/toyota,1996,camry,3.0l+v6,1273564,suspension,strut,7584
Other related videos:
- 1996 Toyota Camry Wagon Playlist: youtube.com/playlist?list=PL-CJZXfrURuNbFKm8L0GcoifCEIwxDNET
Tools used in this video:
- ½ inch 6 Pt. Deep Impact Socket Set: harborfreight.com/13-pc-12-in-drive-metric-impact-deep-socket-set-69279.html
- ½” Pneumatic impact Gun: harborfreight.com/12-in-aluminum-air-impact-wrench-62627.html
- 21 Gal. Oiled Air Compressor: harborfreight.com/21-gal-25-hp-125-psi-cast-iron-vertical-air-compressor-61454.html
- Basic Wrench Set: amzn.to/39eg1fD
- Bauer Impact Driver: harborfreight.com/20v-hypermax-lithium-cordless-14-in-hex-compact-impact-driver-tool-only-56724.html
- 20V 3Ah Bauer Battery: harborfreight.com/20v-hypermax-lithium-30-ah-high-capacity-battery-63631.html
- 3/8” Shallow 12-Point Metric/SAE Sockets: harborfreight.com/21-pc-38-in-drive-sae-metric-high-visibility-socket-set-61954.html
- 3/8” Ratchet: harborfreight.com/38-in-drive-low-profile-ratchet-62328.html
- 6 Ton Jack Stands: harborfreight.com/6-ton-steel-jack-stands-61197.html
- 3 Ton Low Profile Jack: harborfreight.com/3-ton-low-profile-steel-heavy-duty-service-jack-with-rapid-pump-61282.html
Please note that I am not a professional mechanic, nor am I saying that you must do exactly what I say in this video. Perform these repairs at your own risk! Safety first ;)
