Uploaded April 2026 | Updated November 2026, 2 hours ago
Part 1: Remove grub screw from the handle and remove handle both sides
Part 2: Remove rose cover from both sides of door (there's usually a slot that you can use to tease the covers of using a flat ended screwdriver.
Part 3: Remove the male/female screws from the rose and take the rose off lock side.
Part 4: This will allow for the removal of the locks outer cover to reveal the euro retaining screw in this case at the bottom of the lock case.
Part 5: Remove the cylinder and replace with new before reversing the procedure.
Part 1: Remove grub screw from the handle and remove handle both sides
Part 2: Remove rose cover from both sides of door (there's usually a slot that you can use to tease the covers of using a flat ended screwdriver.
Part 3: Remove the male/female screws from the rose and take the rose off lock side.
Part 4: This will allow for the removal of the locks outer cover to reveal the euro retaining screw in this case at the bottom of the lock case.
Part 5: Remove the cylinder and replace with new before reversing the procedure.










