Repairing rotted screw holes in casement windows @StructureTech1
Repairing rotted screw holes in casement windows  @StructureTech1
Uploaded August 2024 | Updated November 2026, 2 hours ago
These windows often fail where the hardware connects to the sash. The wood takes on water, the wood gets soft and the screws holding the hardware in place come loose. When this happens, the windows don't crank open and shut properly.

There are three levels of repair for this condition:
1. Install larger screws. This is a quick and easy fix and will probably buy you several years of time.
2. Repair the area with wood dowels. If you've already installed larger screws and they've come loose again or the wood is too soft, this is a good option. Check out our blog post for step-by-step instructions: structucretech.com/repairing-loose-hardware-casement-window
3. Replace a large section of the wood sash with new wood.
Repairing rotted screw holes in casement windowsKitchen Faucets: hot is left, cold is right... so whats forward and backward?PODCAST with video: Problems with galvanized pipes and dont always trust your AIHow to test a GFCI deviceGas Appliances and Masonry ChimneysDo You Know the Correct Dryer Duct Size?What is an Intrusive home inspection?A quick and dirty comparison of five home energy monitorsProduct review: TopTes PT205 Gas Leak DetectorA call to action over the proposed ASHI SOP (with James Katen)Powervent Water Heater Replacement, start to finishNew Construction Home Inspection Defects (2024)
Structure Tech Home Inspections |

Repairing rotted screw holes in casement windows

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER