Uploaded June 2019 | Updated November 2026, 1 day ago
Video 5 in the repair of 6 show lasers. This time I am installing a few new fuse holders and some key lock switches in the Cittadini and the Light Space Lasers. We also get a good lock inside the Able Laser after the ILDA input is replaced. This is the first I am powering the Able up leading me to find 2 bad red laser diodes and issues with the X galvanometer. Attempts to repair the X galvo where made but there is an issue with a strong kick back torque during power off of the unit which is the core of the problem. On the upside everyone gets a good look inside yet another galvo design!
ti.com/lit/ds/symlink/tl074b.pdf
Video 5 in the repair of 6 show lasers. This time I am installing a few new fuse holders and some key lock switches in the Cittadini and the Light Space Lasers. We also get a good lock inside the Able Laser after the ILDA input is replaced. This is the first I am powering the Able up leading me to find 2 bad red laser diodes and issues with the X galvanometer. Attempts to repair the X galvo where made but there is an issue with a strong kick back torque during power off of the unit which is the core of the problem. On the upside everyone gets a good look inside yet another galvo design!
ti.com/lit/ds/symlink/tl074b.pdf










